Jobs at Chart Industries

Servicetechniker im Außendienst (m/w/d) (Monheim am Rhein, Nordrhein-Westfalen, Germany, 40789)

Wir sind Chart

Chart Industries ist ein weltweit führender Hersteller von hochentwickelter Ausrüstung für vielfältige Anwendungen in den Märkten für saubere Energie und Industriegase. Im Jahr 2023 erwarb Chart Industries die Howden Group und die gesamte Gruppe ist mittlerweile mit über 11.700 Mitarbeitern in über 40 Ländern weltweit vertreten. Unsere Vision ist es, die lebenswichtigen Prozesse unserer Kunden zu ermöglichen und dadurch eine nachhaltigere Welt zu fördern. Erfahren Sie mehr über uns unter https://www.chartindustries.com

Über uns

Die Flow Instruments & Engineering GmbH ist Teil des weltweit agierenden Konzerns Chart Industries mit Sitz in den USA.
An unserem Stammsitz in Monheim am Rhein entwickeln und produzieren wir seit 1981 mit großem Erfolg und stetigen Wachstumsraten Durchfluss-Messsysteme für kryogene Gase. Weltweit setzen Industrieunternehmen wie z.B. Air Liquide, Linde, Messer und Praxair auf unsere hochwertigen Qualitätsprodukte „Made in Germany“.

Das bringen Sie mit

Wir suchen keine Perfektion, sondern Begeisterung und Lernbereitschaft.

Wenn Sie sich in einem oder mehreren der folgenden Bereiche wiederfinden, freuen wir uns auf Ihre Bewerbung:
•   Abgeschlossene Ausbildung in einem technischen Beruf, z. B. als Anlagenmechaniker/ in, Industriemechaniker/ in, Mechatroniker/ in, Betriebsschlosser/in, Rohrleitungsbauer/in, Techniker/in für Kälte- und Klimatechnik oder vergleichbar.
•   Erfahrung im Umgang mit Tanks, Pumpen, Ventilen oder Rohrleitungssystemen – z. B. aus der Tankstellenbranche, Flüssiggastechnik oder Instandhaltung von Industrieanlagen.
•   Erste Berührungspunkte mit Drucksystemen oder gasförmigen Medien sind ein Plus (z. B. aus der Arbeit als Gastechniker/in, Kesselwärter/in oder Servicetechniker/in für Pumpensysteme).
•   Sie arbeiten gerne selbstständig, sind zuverlässig und haben ein sicheres Auftreten beim Kunden.
•   Reisebereitschaft (deutschlandweit und gelegentlich Europa) – Sie lieben es, unterwegs zu sein!
•   Grundkenntnisse in Englisch sowie ein Führerschein der Klasse B runden Ihr Profil ab.

Das erwartet Sie

•   Vielfältige Aufgaben: Sie kümmern sich um Wartung, Kalibrierung, Reparaturen und die Eichung von kryogenen Anlagen wie LNG-Tankstellen und Tankwagen. Auch Inspektionen, Fehlerdiagnosen und der Austausch von Verschleißteilen gehören zu Ihrem spannenden Alltag.
•   Eichtechnische Prüfungen: Gemeinsam mit Behörden sorgen Sie dafür, dass Messanlagen präzise arbeiten – eine verantwortungsvolle Aufgabe.
•   Reisen als Teil Ihres Jobs: Sie lieben es, unterwegs zu sein? Perfekt! In diesem Job sind Sie viel auf Achse – deutschlandweit und gelegentlich auch im europäischen Ausland. Dabei lernen Sie neue Orte kennen, treffen interessante Menschen und erleben jeden Tag etwas Neues.
•   Gestaltungsspielraum: Sie können eigene Ideen einbringen und Ihre Arbeit aktiv mitgestalten.
•   Kundenkontakt: Sie sind das Gesicht unseres Unternehmens vor Ort und sorgen für zufriedene Kunden.

Was Sie von uns erwarten können

•   Firmenfahrzeug: Wir stellen Ihnen ein voll ausgestattetes Servicefahrzeug zur Verfügung, das Ihnen Ihre Arbeit erleichtert.
•   Digitale Tools: Moderne Software für Einsatzplanung, Dokumentation und Kommunikation sorgt für einen reibungslosen Arbeitsalltag.
•   Flexible Arbeitszeiten: Ihre Work-Life-Balance liegt uns am Herzen – flexible Arbeitszeiten machen es möglich.
•   30 Tage Urlaub im Jahr: Genug Zeit, um sich zu erholen und neue Energie zu tanken.
•   Zusätzliche Benefits, die sich sehen lassen können:
o   Monatlicher Netto-Gutschein (50 EUR) flexibel einsetzbar
o   Prämienprogramm für die Empfehlung neuer Kollegen
o   Teilnahme am Bike-Leasing
o   Betriebliche Altersvorsorge (bAV)
o   Spaß bei Teamevents wie Sommerfesten oder Jahresendfeiern
o   Leistungsgerechte Vergütung: Dein Einsatz wird bei uns fair honoriert.

Chart ein Unternehmen für Chancengleichheit

Chart legt Wert auf Chancengleichheit. Wir freuen uns über Bewerbungen mit Menschen mit Behinderung und unterstützen zudem die Bundesinitiative "Job - Jobs ohne Barrieren".

Wir freuen uns auf Sie

Sie fühlen sich angesprochen? Sie finden unser Unternehmen als auch die Aufgaben der Stelle spannend und hätten Lust, uns mit Ihrem hohen Engagement zu unterstützen? Dann bewerben sich direkt über unser Bewerberportal.

Sie haben noch Fragen?

Bei Fragen steht Ihnen Susanne Vong unter +49 6233 852 584 gern zur Verfügung.

Über den „Bewerben“-Button gelangen Sie direkt zur Online-Bewerbung

Servicetechniker im Außendienst (m/w/d) (Monheim am Rhein, Nordrhein-Westfalen, Deutschland, 40789)

Wir sind Chart

Über uns

Das erwartet Sie

Das bringen Sie mit

Wir suchen keine Perfektion, sondern Begeisterung und Lernbereitschaft.

Wenn Sie sich in einem oder mehreren der folgenden Bereiche wiederfinden, freuen wir uns auf Ihre Bewerbung:
•    Abgeschlossene Ausbildung in einem technischen Beruf, z. B. als Anlagenmechaniker/ in, Industriemechaniker/ in, Mechatroniker/ in, Betriebsschlosser/in, Rohrleitungsbauer/in, Techniker/in für Kälte- und Klimatechnik oder vergleichbar.
•    Erfahrung im Umgang mit Tanks, Pumpen, Ventilen oder Rohrleitungssystemen – z. B. aus der Tankstellenbranche, Flüssiggastechnik oder Instandhaltung von Industrieanlagen.
•    Erste Berührungspunkte mit Drucksystemen oder gasförmigen Medien sind ein Plus (z. B. aus der Arbeit als Gastechniker/in, Kesselwärter/in oder Servicetechniker/in für Pumpensysteme).
•    Sie arbeiten gerne selbstständig, sind zuverlässig und haben ein sicheres Auftreten beim Kunden.
•    Reisebereitschaft (deutschlandweit und gelegentlich Europa) – Sie lieben es, unterwegs zu sein!
•    Grundkenntnisse in Englisch sowie ein Führerschein der Klasse B runden Ihr Profil ab.

Was Sie von uns erwarten können

Chart ein Unternehmen für Chancengleichheit

Chart legt Wert auf Chancengleichheit. Wir freuen uns über Bewerbungen mit Menschen mit Behinderung und unterstützen zudem die Bundesinitiative "Job - Jobs ohne Barrieren".

Wir freuen uns auf Sie

Sie haben noch Fragen?

Bei Fragen steht Ihnen Susanne Vong unter +49 6233 852 584 gern zur Verfügung.

Über den „Bewerben“-Button gelangen Sie direkt zur Online-Bewerbung

Finance Manager (Ornago, Monza and Brianza, Italy, 20876)

Ensuring VRV - Chart’s Success…

VRV, part of Chart Industries Inc., is an important industrial reality present for more than 60 years in the international arena both in the design and production of pressure equipment for the Oil & Gas sectors, and in the engineering and manufacture of insulation tanks for the distribution and storage of gas in the Cryogenic sector, as well as a company operating in the Automotive HNLG business.

What Will You Do?

The Finance Manager in our Organization is responsible for the administrative function of VRV Group, part of Chart Industries Inc., listed in US stock market. He/She will coordinate accounting, administrative and treasury teams, ensuring reliability of financial reporting in accordance with ITA & US GAAP accounting and fiscal standards. He/She will be responsible for working closely with leadership teams to ensure full monitoring of cash flow, compliance with Sarbanes-Oxley Act and adherence to Corporate policies.

Coordinates accounting, tax, and financial statements processes for all Italian companies.
Manages monthly closing, including review and approval of journal entries, accruals and various analysis, in close connection with controlling department for the preparation of the full monthly financial reporting package.
Supervises VAT, Intrastat, F24 forms, tax returns, and Italian regulation compliance in general.
Oversees customs matters, intra/extra-EU VAT transactions and foreign tax representatives, following tax corporate guidance.
Ensures completion of statutory and consolidated annual closings in accordance with Italian regulation, supporting internal and external audit activities.
Works closely with auditors, tax / legal advisors, authorities, and consulting firms.
Ensures timely system-based balance sheet reconciliations (A/R, A/P, inventory, fixed assets, banks).
Verifies timely intercompany reconciliations, coordinating with intercompany partners and using corporate tools.
Supervises all accounting tax & treasury initiatives set by our organization and parent company.
Monitors and implements internal control in accordance with SOX.
Keeps up to-date on corporate policy and any changes in current ERP system.
Assess existing financial systems, identifying opportunities for improvement, working to design and implement changes.
Supports the business in achieving cash flow targets, including leveraging and managing risks and opportunities with project managers, purchasing, operations etc.
Manages development of the administrative team.

Requirments & Preferred Qualifications...

Masters’s Degree in Accounting, Finance or Business
At least 15 years of experience in Accounting
ERP Systems with SAP experience is a plus
Previous experience as a Finance Manager in manufacturing companies
Excellent knowledge of English, both verbal and written
Demonstrates good interpersonal skills along with excellent verbal/written communication skills
Ability to accurately communicate complex concepts to non-Finance/Accounting coworkers and upper management
Knowledge of standard concepts, practices, and procedures of accounting
Knowledge of general ledger account structure
Ability to review, approve and reconcile assigned general ledger accounts
Advanced working knowledge of Microsoft Excel (vlookups, pivot tables, etc.)
Able to work in a matrix and remote organization
Possesses strong leadership, supervisory and management abilities
Excellent critical thinking as well as analytical skills
Exceptional organizational skills and effective time manager and multi-tasker
Displays the ability to pay close attention to detail
Maintains confidentiality

VRV - Chart is an equal opportunity employer...

VRV – Chart Industries is committed to a diverse and inclusive workplace. VRV – Chart Industries is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected status.

Finance Manager (Ornago, Monza and Brianza, Italia, 20876)

Garantire il successo di VRV - Chart…

VRV, società del gruppo Chart Industries, è un’importante realtà industriale presente da più di 60 anni in ambito internazionale sia nella progettazione e produzione di apparecchiature in pressione destinate ai settori dell’Oil&Gas, sia nell’ingegnerizzazione e fabbricazione di serbatoi di isolamento per la distribuzione e lo stoccaggio di gas nel settore Criogenico, nonché azienda operante nel business Automotive HLNG.

Quali saranno le tue attività quotidiane...

Il Finance Manager della nostra organizzazione è responsabile della funzione amministrativa del Gruppo VRV, parte di Chart Industries Inc. quotata in borsa negli Stati Uniti. Coordinerà i team di contabilità, amministrazione e tesoreria, garantendo l'affidabilità della rendicontazione finanziaria in conformità agli standard contabili e fiscali ITA e US GAAP. Sarà responsabile di lavorare a stretto contatto con il management per garantire il monitoraggio completo del flusso di cassa, la conformità alla legge Sarbanes-Oxley e l'aderenza alle politiche aziendali.

Coordina i processi contabili, fiscali e di bilancio per tutte le società italiane.
Gestisce la chiusura mensile, compresa la revisione e l'approvazione delle scritture contabili, dei ratei e delle varie analisi, in stretto collegamento con il reparto di controlling per la preparazione dell'intero pacchetto di reportistica finanziaria mensile.
Supervisiona i moduli IVA, Intrastat, F24, le dichiarazioni dei redditi e la conformità alla normativa italiana in generale.
Supervisiona le questioni doganali, le transazioni IVA intra/extra UE e i rappresentanti fiscali esteri, seguendo le linee guida aziendali in materia fiscale.
Assicura il completamento delle chiusure annuali civilistiche e consolidate in conformità alla normativa italiana, supportando le attività di revisione contabile interna ed esterna.
Lavora a stretto contatto con revisori, consulenti fiscali/legali, autorità e società di consulenza.
Assicura la tempestività delle riconciliazioni di bilancio basate sul sistema (A/R, A/P, inventario, immobilizzazioni, banche).
Verifica la puntualità delle riconciliazioni intercompany, coordinandosi con le parti intercompany.
Supervisiona tutte le iniziative contabili, fiscali e di tesoreria stabilite dalla nostra organizzazione e dalla casa madre.
Monitora e implementa il controllo interno in conformità alla normativa SOX.
Si tiene aggiornato sulle politiche aziendali e su eventuali modifiche all'attuale sistema ERP.
Valuta i sistemi finanziari esistenti, identificando le opportunità di miglioramento, lavorando per progettare e implementare le modifiche.
Supporta l'azienda nel raggiungimento degli obiettivi di flusso di cassa, anche sfruttando e gestendo i rischi e le opportunità con il Project Management, l'Ufficio Acquisti, le Operations, ecc.
Gestisce lo sviluppo del team amministrativo.

Requisiti e Qualifiche...

Laurea specialistica in Contabilità, Finanza o Economia
Almeno 15 anni di esperienza in Contabilità
L'esperienza pregressa con sistemi ERP come SAP è considerata un plus
Esperienza pregressa come Finance Manager in aziende manifatturiere
Ottima conoscenza della lingua inglese, sia verbale che scritta
Buone capacità interpersonali e ottime capacità di comunicazione verbale/scritta
Capacità di comunicare accuratamente concetti complessi a colleghi non appartenenti al settore finanziario/contabile e al Management
Conoscenza dei concetti, delle pratiche e delle procedure standard di contabilità
Conoscenza della struttura dei conti della contabilità generale
Capacità di rivedere, approvare e riconciliare i conti della contabilità generale
Conoscenza avanzata di Microsoft Excel (vlookup, tabelle pivot, ecc.)
Capacità di lavorare in un'organizzazione a struttura matriciale
Forti capacità di leadership, supervisione e gestione
Eccellenti capacità di pensiero critico e di analisi
Ottime capacità multi-tasking, organizzative e di gestione efficace del tempo
Capacità di prestare grande attenzione ai dettagli
Mantenimento e garanzia della riservatezza

VRV - Chart è un datore di lavoro per le pari opportunità...

VRV – Chart Industries si impegna a creare un ambiente di lavoro diversificato e inclusivo. VRV - Chart Industries è un datore di lavoro che offre pari opportunità e non discrimina sulla base di razza, origine nazionale, sesso, orientamento sessuale, disabilità, età o altro status legalmente protetto.

Project Manager (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no –see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing –well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart Industries is looking for a Project Manager for our office in Tulsa, OK. This would be an onsite role. The Project Manager will be responsible for all stages of the job from initiation of the contract to job close. The Project Manager oversees the engineering, design and fabrication of awarded contracts.

What Will You Do?

Responsible for all commercial and administrative requirements of Projects
Direct and coordinate activities of project personnel to ensure that the project progresses on schedule and within the budget
Lead the project team and all necessary technical disciplines throughout the project’s design, fabrication and as required installation
Ability to follow all company procedures with regards to project reporting and client interface including:
- Financial/Operations Reviews, Project Planning, Procurement Planning, Budgeting, Staffing and Quality Management
Work with Project Controls and Quality groups as required to support project and departmental requirements
Assist with proposal development and review prior to contract award
Provide technical assistance and problem resolution
Coordinate project activities in order to comply with all design codes, safety regulations, government and regulatory agencies
Review and apply project specifications to engineering, design and fabrication efforts
Review, understand and interpret Customer specifications and contract requirements
Manage Customer and internal documents through the Document Management System
Coordinate material/purchasing requirements, develop requisitions and approve vendor selections
Responsible for cost control, cost forecasting, planning/scheduling, change management, and reporting on projects

Your Experience Should Be...

B.S. with M.S. or M.A.
5 years hands on project management experience
Ability to manage multiple parallel projects
Excellent computer skills including MS Word, Excel, Access, Power Point, PrimaveraP6 and other project management programs
Excellent verbal and written communication skills, analytical and problem solving skills
Ability to work with minimal supervision
Ability to work and succeed in a team environment
Experience working in an environment where responsibility and accountability was expected
Proven leadership, management, supervisory and organizational skills
Excellent customer service skills
Conflict resolution skills
Experience working with Industry Standard Codes (ASME, B31, AISC, ASTM, AWS,OSHA)and or international equivalents
Industrial Fabrication or Construction experience
Understanding of Engineering disciplines
Cryogenic gas processing including natural gas and hydrogen liquefaction, and separation and rejection facilities.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Apprentice Fitter (New Iberia, LA, United States, 70560)

Ensuring Chart’s Success…

What Will You Do?

Perform fitting requirements as per project & drawing specs w/ some assistance
Fabricate piece parts into sub-assembly & assembly
Read, interpret & fabricate from blue prints with some assistance
Correct measuring, proper leveling of components, burning, cutting, welding & tacking
Rig structural or piping assemblies for handling operations
Complete layouts & hold tolerance

Your Physical Work Environment Will Require…

Practical duties including burning, cutting, welding & tacking
Required to work at elevated heights up to 75ft
Comply with standard concepts, practices, and quality procedures

Your Experience Should Be...

Must have knowledge of departmental operations
Must have knowledge of safety procedures and compliance
Must have knowledge of shop standards

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Our Benefits Package...

Apprentice Welder (New Iberia, LA, United States, 70560)

Ensuring Chart’s Success…

What Will You Do?

Certifications:
- Tacking
Under direct supervision and guidance, weld by arc method using stick, gas or flux-shielded wire, semi-automatic, button or stud welding equipment
Under direct supervision and guidance, weld on carbon, alloy or stainless steel plate, sheet, shapes, castings or other parts included in fabricated steel work
Clean welds by chipping, grinding or brushing where required
Complete up to 2 qualification tests
Learn the Weld Map and Welding Procedure Specification requirements
Demonstrate an understanding of the proper use of hand tools, grinders and welding equipment
Assist Welders and Fitters in cleaning, moving, holding, clamping and preparing work pieces
Required to work at elevated heights up to 75ft
Add’l duties and responsibilities may be assigned

Your Physical Work Environment Will Require…

Your Experience Should Be...

High school diploma or equivalent
One year experience as a tacker
Requirements may be obtained through on-the-job training

Our Benefits Package...

Chargé d'amélioration continue (Meyzieu , N/A, France, 69330)

Ensuring Chart’s Success…

What Your Day-to-Day Activities Will Be…

Your Education Should Be…

Your Physical Work Environment Will Require…

Your Professional Experience Should Be…

Chart is an equal opportunity employer...

Need an Accommodation...

Need an accommodation with your job application or recruitment process? Let us know! Chart Industries welcomes qualified individuals with disabilities and provides reasonable accommodations for the hiring process. Don't hesitate to contact the [Human Resources Department] at 770-721-8838 or chartrecruiting@chartindustries.com to discuss your needs.

Chargé d'amélioration continue (Meyzieu , N/A, France, 69330)

Assurer le succès de Chart...

Quelles seront vos activités quotidiennes...

Votre éducation devrait être...

Votre environnement de travail physique exige...

Votre expérience professionnelle doit être...

Employeur souscrivant au principe de l’égalité d'

Besoin d’un accommodement...

Engineer SCM (Chennai, Tamil Nadu, India, 600077)

Ensuring Chart’s Success…

We are inviting you to join Howden, a Chart Industries Company become a trusted and valued member of our Business Intelligence Team. AS part of this vital team, you will play a crucial role in developing and maintaining business intelligence solutions that driver data-driven decision-making across the organization.Howden was acquired by Chart Industries in 2023. Chart Industries is a leader in innovation focused on our transition to a greener energy environment. We are a leading global manufacturer of highly engineered equipment and solutions serving multiple applications in the Energy, Industrial gas end sectors. We supply cryogenic systems and have a global presence in 40 countries, and more than 11,000 employees. Howden's long heritage and technology enable this transition on a more efficient level. Our vision is to enable the vital processes of our customers and thereby promote a more sustainable world via our Nexus of Clean Strategy.

What Will You Do?

· Execution of day-to-day SCM activities like conversion of PR to PO in co-ordination with internal departments ensuring compliance with company policies and procedures, follow up & review with suppliers on the status of materials and attending internal review meetings.

· Coordinate with internal departments, to assess supply needs and specifications.

· Manage purchase orders from placement through delivery, ensuring timely receipt of materials.

· Evaluate and select suppliers based on criteria such as price, quality, and delivery speed.

· Conduct supplier evaluations and negotiations to secure favorable terms and conditions.

· Monitor and manage supplier performance to ensure quality and timely delivery.

· Ensuring proper GRN for day-to-day material receipts and monitoring supplier payment process.

· Analyze market trends and price developments to make informed purchasing decisions

· Maintain accurate records of inventory levels and procurement activities.

· Collaborate with other departments to align SCM activities with overall business goals

· Basic knowledge of Imports procurement.

· Familiarity with procurement software and ERP systems to streamline purchasing processes.

Your Physical Work Environment Will Require…

· Ensuring a consistent supply of high-quality materials and goods is paramount for maintaining production schedules and meeting sale demands. It involves negotiating favorable terms, resolving conflicts, and collaborating on innovation and efficiency improvements, directly impacting the ability to optimize costs and ensure supply chain resilience.

· Cost Analysis: Interpreting price trends and cost factors is crucial for negotiating supplier contracts that optimize financial efficiency and ensure a steady flow of materials.

· Understanding budgeting, cost control, and financial analysis to manage procurement costs effectively.

· Proactive and able to work on your own initiative

Your Experience Should Be...

Education: A Supply Chain Buyer should hold a Bachelor’s Degree in Supply Chain Management or a related field (Mechanical/Electrical/Instrumentation & Control).

Experience: Supply Chain Buyer should have experience of 8 to 10 years in procurement of High value bought out items in Mechanical, Instrumentation & Control material category. Supply Chain Buyer should have insights into product lifecycles, cost-saving strategies, and supplier relationship management, equipped with the expertise needed to excel in dynamic purchasing environments.

Regional Sales Manager (Sriracha, Chon Buri , Thailand, 20230)

Ensuring Chart’s Success…

Howden, a Chart Industries Company, is a global leader in air and gas handling products, services and solutions. Howden’s core focus is on providing quality solutions for air and gas handling, and have over a century of experience in doing so.

We are inviting you to join Howden Thailand as the Regional Sales Manager.

This business development role focuses on maximizing business value of the Howden Aftermarket Product and services in the Thailand and to achieve the country’s bookings budget while ensuring required margins are met. The main focus will be on forecasting, identifying, developing and winning Aftermarket business by developing technical and commercial retrofit proposals, service agreements and spares/support packages for clients in all key markets in Thailand, as well expand Thailand business to be more turnkey service provider, providing more field work on site.

What Will You Do?

Country Strategic Sales and Growth plan.

Business Development

Sales and funnel management

Sales reporting and CRM.

Supply chain support.

SHE and Howden policies.

Your Physical Work Environment Will Require…

Remote based with regular visits to customer sites across the country

Your Experience Should Be...

Engineering Degree or Diploma with at least 8 years of relevant working experience
At least 5 years of experience as “hunter” business development role in the areas of services and turnkey projects involving rotating machineries installed in PCOG industries, mining or petrochemical plants
Individual contributor role

Field technician (Zwijndrecht, Zwijndrecht, Belgium, 2070)

Ensuring Chart’s Success…

Howden Maintenance Partners is part of Chart Industries and is a growing service company within the group, specializing in the maintenance, repair, and overhaul of industrial machines, both electrically and mechanically rotating. Think of electric motors, pumps, gearboxes, generators, steam turbines, turbo compressors, reciprocating compressors, and expanders. This can be done on-site at the customer’s location or at one of our facilities.

Chart Industries is represented in more than 40 countries with over 11,700 employees.

As a Service Technician, you will go on-site to overhaul machines at the customer’s location. If more extensive maintenance is required, you will be responsible for disassembly so that the maintenance or repair can be carried out in the workshop. After the maintenance or repair, you will reassemble the machine at the customer’s site.

What Will You Do?

You will overhaul all kinds of (electro)mechanical equipment such as compressors, turbines, and pumps;
During disassembly, you will measure the machine, dismantle it, and prepare it for transport;
After the overhaul or repair in the workshop, you will reinstall the machine on-site, align it, and bring it back into operation;
When disassembling and assembling the installation, you will handle tasks such as fitting, aligning, determining clearances, final assembly, and possibly installing new equipment. You will use the necessary tools and, in consultation, have any special tools made;
You will check whether the work can be carried out safely;
You will be responsible for test-running the repaired or new installation, in consultation with the supervisor/customer;
You will adjust various components, whether hydraulic, pneumatic, or electric;
You will keep records of the work performed, newly acquired parts or tools, and hours worked.

What do you bring to the table?

You have a higher secondary education diploma in a technical field or equivalent through experience;
Pump technology, hydraulics, and pneumatics hold no secrets for you;
You have experience with aligning directly coupled machines or belt-driven systems – check!
A basic knowledge of mounting and dismounting bearings is definitely a plus;
You enjoy working outside the traditional 9-to-5 framework;
You have a Category B driving license.

What do we love to see?

You have a strong affinity with the industrial sector (chemicals, petrochemicals, power, etc.);
You are passionate about your job and interested in the latest developments in your field;
You are a team player, but also work well independently—your strong communication skills support you in both;
You get a boost from working in new environments;
Organizing, flexibility, and independence are your middle names;
The idea of occasional international travel makes your heart beat faster.

What's in it for you?

Working at a company that does what no other company in Europe can do – not too bad, right?
You’ll be immersed in a unique business with a steep learning curve;
Howden Maintenance Partners offers a pleasant, family-like SME atmosphere, supported by the strength of a large multinational – Chart Industries. A true win-win;
You’ll work for a company that genuinely cares about its employees. Your well-being is our top priority;
A company car of your own;
A daily net expense allowance for each day worked;
32 days off per year to enjoy what you love, plus the ability to build up compensatory time;
Eco vouchers worth €250 per year.

Field technician (Zwijndrecht, Zwijndrecht, Belgium, 2070)

Ensuring Chart’s Success…

Chart Industries is represented in more than 40 countries with over 11,700 employees.

What Will You Do?

You will overhaul all kinds of (electro)mechanical equipment such as compressors, turbines, and pumps;
During disassembly, you will measure the machine, dismantle it, and prepare it for transport;
After the overhaul or repair in the workshop, you will reinstall the machine on-site, align it, and bring it back into operation;
When disassembling and assembling the installation, you will handle tasks such as fitting, aligning, determining clearances, final assembly, and possibly installing new equipment. You will use the necessary tools and, in consultation, have any special tools made;
You will check whether the work can be carried out safely;
You will be responsible for test-running the repaired or new installation, in consultation with the supervisor/customer;
You will adjust various components, whether hydraulic, pneumatic, or electric;
You will keep records of the work performed, newly acquired parts or tools, and hours worked.

What do you bring to the table?

You have a higher secondary education diploma in a technical field or equivalent through experience;
Pump technology, hydraulics, and pneumatics hold no secrets for you;
You have experience with aligning directly coupled machines or belt-driven systems – check!
A basic knowledge of mounting and dismounting bearings is definitely a plus;
You enjoy working outside the traditional 9-to-5 framework;
You have a Category B driving license.

What do we love to see?

You have a strong affinity with the industrial sector (chemicals, petrochemicals, power, etc.);
You are passionate about your job and interested in the latest developments in your field;
You are a team player, but also work well independently—your strong communication skills support you in both;
You get a boost from working in new environments;
Organizing, flexibility, and independence are your middle names;
The idea of occasional international travel makes your heart beat faster.

What's in it for you?

Working at a company that does what no other company in Europe can do – not too bad, right?
You’ll be immersed in a unique business with a steep learning curve;
Howden Maintenance Partners offers a pleasant, family-like SME atmosphere, supported by the strength of a large multinational – Chart Industries. A true win-win;
You’ll work for a company that genuinely cares about its employees. Your well-being is our top priority;
A company car of your own;
A daily net expense allowance for each day worked;
32 days off per year to enjoy what you love, plus the ability to build up compensatory time;
Eco vouchers worth €250 per year.

Field Service Engineer . mechanical (Istanbul, Istanbul, Turkey, 34406)

Ensuring Chart’s Success…

Field Service Specialist - Mechanical must support Field Service and Aftermarket growth in securing service and retrofit on own installed base and competitions installed base. In close relationship with both Aftermarket, Engineering. The FSS must service all customers professionally and secure a high degree of customer satisfaction. Technical Advisor are expected to work consistently with securing on time delivery of support, to customers and business partners.

The main purpose of the job will include the following scope:

New installed base supervision, maintenance, service & retrofit support.
Identify new opportunities - Sales, service agreements, technical support/solutions etc.
Project- Team Management (non-commercial)
Support on technical issues on site and internal in Howden
Secure that our clients utilize our equipment according to manuals and documentation

What Your Day-to-Day Activities Will Be…

The responsibilities for this position include on-site technical support, encompassing tasks such as new installations, commissioning, servicing, and troubleshooting.
Perform field service activities in accordance with manuals and technical documents.
Perform overhauls and repairs on assemblies on site and/or in workshop.
Ensure that all work is executed in compliance with HSE guidelines and local regulations.
Prepare progress reports, work reports, test results and verification documents.
Protection and the development of Howden market share and market position
Advise our customers out from Howdens Specifications/Standards and tolerance, to secure the best value and results.
Respect for the company rules and general guidelines - set by management.
Participate in start-up meetings - Service jobs, Share know-how with other internal Howden Staff.
The Person needs to be flexible, a good listener, can advise the customer in the best way. Could work under pressure, reporting back to head office, be proactive.

Your Professional Experience Should Be…

Applicants should hold a degree from technical departments of universities or vocational technical school.
Preferably, candidates should have experience with rotating equipment such as fans, blowers, compressors, and turbines.
Previous supervisory experience is preferred.
Hands-on experience is needed
Technical background/Skills.
Service-minded and understand the importance of identifying customer needs.
Friendly and efficient communications with colleagues and customers
Persistent and used to working independently.
Prioritizes tasks according to resources and deadlines.
Able to travel domestically and internationally.
Good command of MS Office programs.
Good command of English
B class driving license is required
No military obligation
Site experience.
Mechanicals skills.

Chart is an equal opportunity employer...

Howden, a Chart Industries Company provides a competitive benefits package that ensures not only do you perform on an optimum level, but also balance your private and professional responsibilities in a friendly and modern environment.

Health and Quality of Life benefits:

Competitive salary
Private Medical Insurance package with Sigorta Allianz.
Employee recognition initiatives, well-being initiatives and team buildings

Development Opportunities:

Constant learning opportunities and challenges that help our employees grow
Vertical and horizontal organizational movement
Professional practice and free e-learning opportunities

Flexible and supportive working environment:

Our new and modern office and shopfloor are in the heart of the industrial zone in Kocaeli/Dilovası: Cerkesli Mh. Uzuntarla Sk. No:28 Dilovasi, Kocaeli, Türkiye

Non-binding working hours
State-of-the-art technology and IT equipment: laptop, headset, workstation, Windows and MS365 software
Global diverse community where people can support and learn from each other, celebrate successes and have fun in team buildings and programs.
Opportunity to be involved in our ESG “Bright Future” initiatives

Product Specialist Compressors R&D (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomssen Compressors (HTC), is a specialist supplier of tailor-made gas compression equipment to various industries. Our products have made a valuable difference for our clients for the past century, and we are currently looking for a R&D Lead Engineer who will assist us in making a valuable difference in the century to come in a company that is leading in the energy transition.

The Product Specialist Compressors R&D provides a technical support to the Sales and Project global teams by ensuring the necessary design rules and basis of technical standards are available and maintained and replying to specific support requests. He analyses, validate and formalize the knowledge related to the core products in the company.

What are the responsabilities we give you?

Defining and issuing the fundamental design rules and technical standards up to the point they can be used by the project teams to execute projects without support from R&D; All changes/additions need to be implemented properly as per the organization’s procedures and requirements
Verifying calculation methods, clarifies existing standards and acceptance criteria
Initiating, performing and reviewing DFMEAs (Design failure mode and effect analysis)
Analysing and replying to questions from the other teams related to understanding and application of the technical standards
Supporting the Sales Teams and makes decisions on compressor applications and selections that can not be achieved within the limits of technical standards; validation or advice
Contributing to or leading troubleshooting activities to support project teams

What would we like to see in your background, experience or knowledge?

Master Degree in an engineering discipline
Experience working on and/or with compressors
Solid academic knowledge of rotating equipment, subsystems and interfaces between systems
Working knowledge of calculations and design methodologies, systems and tools
Knowledge of manufacturing processes
Basic knowledge on materials (mechanical properties, composition, uses)
Analyse and compare design alternatives
Solid academic knowledge (though not expertise) in thermodynamics and fluid mechanics
Basic knowledge in vibrations and pulsations, pressure equipment
Communication: ability to explain and document technical choices, ability to write technical documentation
Good communication skills in English is required

What will you get in return?

This is a great opportunity to be part of an international environment and a successful company. We offer the right candidate an independent role, with a large degree of freedom, responsibility and impact. You will get the chance to work with a highly motivated team to capture the growth opportunities in the renewable hydrogen market! As we consider talent management as key to the success of our organization, we offer opportunities for personal and professional development. We offer a salary package that is fully in line with the level of the position combined with an extensive package of fringe benefits.

Associate Project Manager (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Chart Industries Company is currently seeking for an on-site Associate Project Manager based in Beasley, TX. The Associate Project Manager will be responsible for all stages of the job from initiation of the contract to job close. The Associate Project Manager oversees the engineering, design and manufacturing of awarded contracts.

What Will You Do?

• Prepare required document/reporting by project team and stakeholder, such as weekly open AR update, project triage, monthly OTD report, etc.
• Responsible for managing accounting/finance function to project team and customer, such as issuance of invoice, AR collection, change order, job setup, budget setup, change order job setup, change order budget, etc
• Develop, implement, and maintain a standard Project Progress Review cadence and Project Progress Report datapoints and KPIs (LDs, Eng/Ops milestones, Critical Pos, Financials i.e. Revenue/Cash/Cost/Margin, Risk and Opportunity Management, Change Orders)
• Create/update and document standard Project Management Processes and Tools for PM processes (PRR & Risk & Opp Mgmt, Project Implementation Plan, Sales Handover, Internal and External Kick-off, Progress Reviews, Escalation Management, Change Order Management, Project Close-out, Lessons Learned, Customer Survey)
• Responsible for managing project management dashboard
• Responsible and manage small projects:
o Project manage of small aftermarket projects simultaneously from order issuance, engineering, manufacturing through shipment
o Track project progress and handle any issues that arise
o Act as the point of contact for project team and customer
o Create and maintain comprehensive project documentation, plan, and reports
o Assure safe project execution to the client's satisfaction, consistent with cost/budget, schedule and contractual requirements while maintaining bottom line responsibility for financial success
o Maintain good communication with all stakeholders and providing updates as necessary
• Participate in project meetings
• Abides by our business ethics
• Assist project management leadership as required

Your Physical Work Environment Will Require…

• Office setting with Shop Exposure

Your Experience Should Be...

• Bachelors Degree in Business, Engineer or Similar
• CAPM or PMP Certification and Lean Six Sigma is a plus

This position is not eligible for sponsorship

Retrofit Solution Manager (Frankenthal, Rheinland-Pfalz, Germany, 67227)

Ensuring Chart’s Success

Als Retrofit Solution Manager (m/w/d) sind Sie zentraler Vertriebs-Ansprechpartner und verantworten die Schnittstelle zwischen Endkunden, Regionalgesellschaften und internen Fachabteilungen. Zudem bearbeiten und verhandeln Sie Projekte technisch und kaufmännisch, verfolgen Angebote und Projekt-Forecasts, leiten Marketingmaßnahmen ab und unterstützen die Einführung neuer Produkte und Lösungen.

Über uns

Howden ist ein führender globaler Hersteller von hochentwickelten Geräten, die vielfältige Anwendungen in den Bereichen saubere Energie und Industriegase abdecken. Im März 2023 erwarb Chart Industries den Howden-Konzern und stärkte damit unsere globale Präsenz in über 40 Ländern mit einem Team von jetzt mehr als 11.700 Fachkräften. Unsere Mission ist es, die kritischen Prozesse unserer Kunden zu unterstützen und durch die Verschmelzung der innovativen Prozesstechnologien von Chart und Howden eine nachhaltigere Welt zu schaffen. Erfahren Sie mehr über uns unter www.chartindustries.com.

Ihre Aufgaben

Konzeption, Angebotserstellung, Präsentation und Vertragsklärung zu Retrofit-Produkten und damit zusammenhängenden Leistungen für Turbomaschinen
Als zentraler Vertriebs-Ansprechpartner verantworten Sie die Schnittstelle zwischen Endkunden oder Regionalgesellschaften und internen Fachabteilungen
Verantwortung für die technische und kaufmännische Bearbeitung und Vertragsverhandlung von Projekten sowie die Übergabe dieser im Auftragsfall an das Projektmanagement
Verfolgung von Angeboten sowie Projekt-Forecast
Ableitung geeigneter Marketingmaßnahmen (Kampagnen) zur Erreichung der Absatz- und Ergebnisziele
Vertriebsseitige Begleitung der Einführung neuartiger Produkte und Lösungen (New Product Development)

Ihr Profil

Abgeschlossenes Studium der Fachrichtung Wirtschaftswissenschaften, Wirtschaftsingenieurwesen, Maschinenbau (oder vergleichbar), sowie langjährige Berufserfahrung im technischen Vertrieb, idealerweise im Turbomaschinenumfeld
Alternativ haben Sie eine erfolgreich abgeschlossene technische Berufsausbildung, langjährige fachspezifische Berufserfahrung und eine Weiterbildung zum/r Maschinenbautechniker/in
Kenntnisse im Bereich von Turbomaschinen-Verfahrenstechnik und -Regelung von Vorteil
Bereitschaft, sich in technisch komplexe Systeme einzuarbeiten
Gute Kenntnisse im Umgang mit SAP und CRM-Tools sind wünschenswert
Sie sind bereit zu weltweiten, regelmäßigen Reisetätigkeiten (~20-30%)
Verhandlungssichere Deutsch- und sehr gute Englischkenntnisse sind für Sie eine Selbstverständlichkeit

Unsere Rahmenbedingungen & Benefits

•   Gute Vergütungskonditionen im Metall- und Elektrotarif
•   Flexible Arbeitszeiten bei einer 35-Stunden-Woche und 30 Tagen Urlaub im Kalenderjahr
•   Mobiles Arbeiten
•   Kostenloser Firmenparkplatz vorhanden und gute Verkehrsanbindung (5 Min. Fußweg zum Bahnhof)
•   Elektroladesäulen am Standort
•   Arbeitgeberbeitrag zur Altersvorsorge
•   Kantine vor Ort und zahlreiche Betriebssportgruppen
•   Mitarbeiter-Benefits (Corporate Benefits, Business Bike etc.)
•   Ein innovatives Unternehmen mit einer offenen Unternehmenskultur
•   Es erwartet Sie eine umfassende Einarbeitung sowie eine kontinuierliche Weiterbildung

Chart setzt sich aktiv für Chancengleichheit ein

Die Absicht des Unternehmens in Bezug auf die Einstellung, Auswahl und Beförderung ist es, die geeignetste Person für jede Stelle auszuwählen. Dies unabhängig von der Herkunft, den religiösen Überzeugungen, dem Geschlecht, der sexuellen Orientierung, dem Familienstand, dem Alter oder der Behinderung dieser Person. Wir unterstützen zudem die Bundesinitiative „Job – Jobs ohne Barrieren“.

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Susanne Vong (susanne.vong@chartindustries.com) gern zur Verfügung.

Auszubildender Industriemechaniker (Coswig, Sachsen, Deutschland, 1640)

In unserer Howden GmbH werden Hochleistungsventilatoren und -gebläse sowie regenerative Wärmetauscher und Filteranlagen konstruiert, produziert, vertrieben und im Service betreut. Unsere Produkte werden auf der ganzen Welt für ihre Qualität und Innovation geschätzt. Darauf sind wir sehr stolz und uns dabei stets bewusst, dass es die Menschen sind, die unseren Erfolg ausmachen.

Zur Verstärkung unseres Teams suchen wir für unseren Standort Coswig einen Auszubildenden zum Industriemechaniker (m/w/d).

Was kannst du bei uns lernen?

Montieren von Bauteilen und Baugruppen
Lesen und Anwenden von Technischen Zeichnungen, Stücklisten und Arbeitsplänen
Blechbearbeitung (Brennschneiden, Schleifen, Walzen)
Schweißen von Blechbauteilen

Was solltest du mitbringen?

Wir erwarten einen mittleren Schulabschluss mit mindestens befriedigendem Notendurchschnitt, besonders in Mathematik, Physik und Deutsch.
Du solltest Interesse für Metallbearbeitung sowie technisches Verständnis und handwerkliches Geschick haben.
Du zeichnest dich durch Teamfähigkeit, Leistungsfähigkeit und Zuverlässigkeit aus.

Was bieten wir dir?

Es erwartet dich eine interessante und vielseitige Ausbildung in allen Bereichen unserer Fertigung.
Ein Teil der praktischen Ausbildung wird bei unserem Kooperationspartner MEA Metall- und Elektroausbildung gGmbH in Kesselsdorf durchgeführt. Dort wirst du auch intensiv auf die Abschlussprüfungen Teil I und II vorbereitet.
Du erhältst eine faire Ausbildungsvergütung und arbeitest 38 Stunden pro Woche.
Du wirst in einem angenehmen Arbeitsklima tätig sein.

Hast du Interesse?

Dann sende deine vollständige Bewerbung (Anschreiben, Lebenslauf, Zeugnisse, Praktikumsnachweise) vorzugsweise per E-Mail an htw.bewerbung@chartindustries.com

Bei Fragen stehen dir gern zur Verfügung
- Angret Ernst +49 3523 94 234
- Mandy Kunz +49 3523 94 201

Auszubildender Industriemechaniker (Coswig, Sachsen, Germany, 1640)

Zur Verstärkung unseres Teams suchen wir für unseren Standort Coswig einen Auszubildenden zum Industriemechaniker (m/w/d).

Was kannst du bei uns lernen?

Montieren von Bauteilen und Baugruppen
Lesen und Anwenden von Technischen Zeichnungen, Stücklisten und Arbeitsplänen
Blechbearbeitung (Brennschneiden, Schleifen, Walzen)
Schweißen von Blechbauteilen

Was solltest du mitbringen?

Wir erwarten einen mittleren Schulabschluss mit mindestens befriedigendem Notendurchschnitt, besonders in Mathematik, Physik und Deutsch.
Du solltest Interesse für Metallbearbeitung sowie technisches Verständnis und handwerkliches Geschick haben.
Du zeichnest dich durch Teamfähigkeit, Leistungsfähigkeit und Zuverlässigkeit aus.

Was bieten wir dir?

Es erwartet dich eine interessante und vielseitige Ausbildung in allen Bereichen unserer Fertigung.
Ein Teil der praktischen Ausbildung wird bei unserem Kooperationspartner MEA Metall- und Elektroausbildung gGmbH in Kesselsdorf durchgeführt. Dort wirst du auch intensiv auf die Abschlussprüfungen Teil I und II vorbereitet.
Du erhältst eine faire Ausbildungsvergütung und arbeitest 38 Stunden pro Woche.
Du wirst in einem angenehmen Arbeitsklima tätig sein.

Hast du Interesse?

Dann sende deine vollständige Bewerbung (Anschreiben, Lebenslauf, Zeugnisse, Praktikumsnachweise) vorzugsweise per E-Mail an htw.bewerbung@chartindustries.com

Bei Fragen stehen dir gern zur Verfügung
- Angret Ernst +49 3523 94 234
- Mandy Kunz +49 3523 94 201

Production Assembler I - 3rd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

The Stackers' scope is to safely assemble individual components into heat exchangers in accordance with the engineering specifications while following work instructions and leadership’s directions; As well as other production related tasks.

What Will You Do?

Stacking/Assembling materials in accordance with engineering drawings
Forklift, pallet jack, hoists, etc utilized and safely handled
Following direction independently from supervisor to completion of job responsibilities

*Please note, this is a 3rd shift position (8pm to 6:30am)

Your Physical Work Environment Will Require…

Manufacturing Plant Environment
Warehouse driving such as forklift, lift trucks, etc
Shipment transport, driving box truck, etc
Lift up to 50 lbs.
Sitting, standing, stooping, bending, other movement as necessary
Manufacturing Plant – required PPE when necessary
Third Shift position - overnight availability required

Your Experience Should Be...

High School Diploma or equivalent preferred
Desired: Previous experience in a warehouse environment
Safety Rules
Quality Checks
Able to Follow/read assembly drawings
Tape Measure / Calipers / Micrometer use
Pallet Jack
Assembly
Quality Issues
Machine Operators
Clamp Truck
Stack Boxes
General Maintenance
Product Quality
Hoists
Bundling
Production Process
Safety Procedures
Customer Specifications
Control Panels
PPE
Wet End
Ability to:
- Adhere to Company Standards and Values
- Follow attendance guidelines and structure
- Meet deadlines for assignments
- Interact personably with co-workers and associates

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Process Controls Engineer (Orem, UT, United States, 84057)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart Industries is looking for a Process Controls Engineer for our office in Orem, UT. We are open to a hybrid schedule for this role. The Process Controls Engineer begins to take direct engineering responsibility for the conceptual design of Chart process technologies to meet customer requirements. This person must work well within a small team environment while preparing process information deliverables for the basic engineering design package.

What Will You Do?

Support process development for innovative Cryogenic Carbon Capture (TM) technology through Aspen Plus and in-house modeling
Develop and implement industrial-grade process control, including model predictive controls and human-machine interfaces, for highly integrated prototype and commercial processes
Simulate steady-state and transient/dynamic processes to describe performance and heat and material balances
Prepare process equipment data sheets and equipment lists
Prepare Process Flow Diagrams
Assist in the development of Piping and Instrumentation Diagrams
Assist in the development of wiring and loop drawings and control system architectural drawings for internal research and development work
Provide process data to mechanical engineering department and key vendors for equipment sourcing
Check process engineering work performed by other Process and Process I Engineers
Assist in the preparation of Start-up and Operating Manuals
Participate in experimental work and prototype operation
Some travel around 10%

Your Physical Work Environment Will Require…

The employee frequently is required to sit for extended periods of time, stand, walk, use hands and fingers, handle or feel, and reach with hands and arms. The employee is occasionally required to sit, climb, balance, kneel, crouch, or crawl. Lifting of 50 pounds may be required. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Duties include lengthy visual requirements on computer monitors.

Your Experience Should Be...

Minimum Bachelor’s in Chemical Engineering or Process Engineering
Master’s Degree in Chemical Engineering with controls emphasis is ideal
2 to 5 years of process engineering experience (or educational equivalent)
Computer programming expertise in one or several of C++, C#, Java/JavaScript, or Python
Working knowledge of Microsoft Office Knowledge of chemical engineering “First Principles” especially thermodynamics and heat/mass transfer
Working knowledge of ASPEN Plus/HYSYS and/or similar process simulation software, including dynamics simulation
Knowledge of cryogenic process technologies which can include cryogenic air separation, natural gas liquefaction, hydrogen liquefaction, helium processing and liquefaction, etc.
Knowledgeable in natural gas processing technologies
Some experience and interest in control system and human machine interface software
Understands basic applicable engineering/electrical/safety codes
Proven teamwork skills
Sound organizational skills for completing tasks as scheduled
Strong communication skills both verbal and written for the purpose of explaining challenges and solutions internally
Good interpersonal skills to successfully interface other engineering disciplines and customers
Customer focused

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

EMSR Project Manager (Frankenthal, Rheinland-Pfalz, Deutschland, 67227)

Ensuring Chart’s Success

Als EMSR Project Manager (m/w/d) übernehmen Sie die Umsetzung komplexer Kundenprojekte im Bereich elektrischer Maschinen. Sie analysieren Kundenspezifikationen, erstellen technische Konzepte und Spezifikationen, insbesondere für Turbogeneratoren, und beraten unsere Kunden fachlich. Zudem begleiten Sie - überwiegend vom Büro aus - Inbetriebnahmen. Dabei leisten Sie technische Unterstützung - sowohl intern z.B. für den Vertrieb, als auch extern - und treiben die kontinuierliche Verbesserung unserer Produkte und Prozesse aktiv voran.

Über uns

Howden ist ein führender globaler Hersteller von hochentwickelten Geräten, die vielfältige Anwendungen in den Bereichen saubere Energie und Industriegase abdecken. Im März 2023 erwarb Chart Industries den Howden-Konzern und stärkte damit unsere globale Präsenz in über 40 Ländern mit einem Team von jetzt mehr als 11.700 Fachkräften. Unsere Mission ist es, die kritischen Prozesse unserer Kunden zu unterstützen und durch die Verschmelzung der innovativen Prozesstechnologien von Chart und Howden eine nachhaltigere Welt zu schaffen. Erfahren Sie mehr über uns unter www.chartindustries.com.

Ihre Aufgaben

Planung, Steuerung und Durchführung von Kundenprojekten
Beurteilung, Anwendung und Umsetzung von Kundenspezifikationen nach europäischen und internationalen Normen und Richtlinien
Kundenberatung und Betreuung
Erstellen von technischen Spezifikationen (z.B.: Schaltschränke, Generatoren, etc.)
Konzepterstellung für Regelung, Schutz und Synchronisierung von Turbogeneratoren
Technische Unterstützung von internen und externen Kunden (z.B.: Inbetriebnahme, Vertriebsunterstützung)
Kontinuierliche Verbesserung von Produkten und Prozessen gehört zum täglichen Arbeiten

Ihr Profil

Aus-/Weiterbildung:

Erfolgreich abgeschlossenes Studium der Fachrichtung Elektrotechnik, gerne mit der Vertiefung elektrische Maschinen
Alternativ verfügen Sie über eine Ausbildung/ Weiterbildung zum/r Meister/in, Techniker/in

Erfahrung/ Kenntnisse:

Vertiefte Kenntnisse bzgl. elektrischen Maschinen (z.B.: Synchrongeneratoren)
Von Vorteil: Erfahrungen im Bereich Regelungstechnik sowie Kenntnisse im Bereich Instrumentierung und Automatisierung

Persönliche Fähigkeiten:

Lernbereitschaft, Ergebnisorientierung, Analysefähigkeit
Kundenorientierung

Weiteres:

Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift
Grundsätzliche Bereitschaft für gelegentliche Reisen

Unsere Rahmenbedingungen & Benefits

Flexible und unterstützende Arbeitsumgebung

Flexible Arbeitszeiten bei einer 35-Stunden-Woche und 30 Tagen Urlaub im Kalenderjahr
2 Tage Home-Office / Woche
Gesundheitsprogramme
Betriebssportgruppen
Mitarbeiter-Benefits

Vergütung & Konditionen

Sehr gutes Vergütungspaket nach Qualifikationen und Erfahrungen im Metall- und Elektrotarif
Arbeitgeberbeitrag zur Altersvorsorge

Standortkonditionen

Elektroladesäulen am Standort
Firmenparkplatz vorhanden und gute Verkehrsanbindung (5 Min. Fußweg zum Bahnhof)
Kantine vor Ort

Einarbeitung und Weiterbildung

Sehr ausführliche Einarbeitung – abgestimmt auf Ihren Erfahrungs- und Kenntnishintergrund - garantiert
Kontinuierliche Weiterbildungen und Schulungen

Chart setzt sich aktiv für Chancengleichheit ein

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche:

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Apprentice Trg Co-Ordinator (Peterborough , England, United Kingdom, PE4 5HG)

The Role

Chart Industries are hiring an Apprentice Training Coordinator, which is a unique and exciting opportunity for a time-served and skilled individual to utilise their skills and knowledge to pass onto a group of up to 20 apprentices spread over a 4 year in-house training programme. The role will be responsible for instructing and guiding new employees, apprentices and trainees, whilst assisting with the training of apprentices to achieve the required level of job performance and competency.

Who are we...

Chart Industries is a leading global manufacturer of highly engineered equipment servicing multiple applications in the clean energy and industrial gas markets. Chart employees over 11,700 people based across 64 global manufacturing locations and 50+ service centres. Recognised for an innovative edge and expansive portfolio, Chart has a global leadership position in process technologies with products and services in applications such as hydrogen, carbon capture, energy recovery, nuclear, water treatment, mining, and LNG to name a few.

The strategic combination of Howden and Chart expands our offering of products and solutions across the Nexus of Clean™ -- clean power, clean water, clean food and clean industrials. Together we are advancing a more sustainable future, by helping our customers to increase their environmental & functional efficiencies and decarbonise their operations. We have a strong corporate identity and a clear purpose - you will be a member of our team shaping the future of the company and participating in helping our customers tackle some of the planet's most pressing issues.

What will you do...

Lead the 4 year Apprentice Training Programme in HTO-UK.
Be the line manager and responsible person for up to 20 apprentices aged between 16-22.
Oversee their training programme and ensure participation and completion of required elements.
Have sufficient technical skill and knowledge to be able to safely teach the basic hand tool and simple machining skills for first year apprentices, progressing up to and including complex machining and programming.
Liaise with external training colleges and other institutions.
Operate recruitment and selection programme for new apprentice intake.
Manage the Apprentice development programme in house.

The role is based on site in Peterborough with an essential need to be visible and present. Some travel to recruitment fairs and events is required as is occasional out of hours working, which is fully expensed. This role may also require additional travel within the UK from time to time.

What do you bring...

An ideal candidate would likely have the following experience…

Awareness and understanding of Health and Safety requirements and legislation.
Ability to communicate effectively with others, both verbally and in writing.
Excellent attention to detail.
Knowledge of modern manufacturing management techniques.
The ability to work on own initiative.
Knowledge of 5S continuous improvement
Recognised Modern Apprenticeship

We’ve put together some criteria that we think is important for this role, but don’t worry if your experience and expertise isn’t an exact match. If you feel that you can add value to our role and to Howden more broadly, we would welcome your application and be eager to learn more about you.

Our benefits...

This is a permanent position based at our office in Peterborough, including an early finish on Friday. Our range of fantastic benefits includes:

Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7% with Scottish Widows
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan with Healthshield
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunity employer...

The Company intention in respect of recruitment, selection and promotion is to appoint the most suitable candidate for each job regardless of that person’s race, religious beliefs, sex, sexual orientation, marital status, age or disability.

Lead Engineer (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for a Lead Engineer, who will join our Project Engineering team and will support in making a valuable difference in the century to come.

The Lead Engineer takes full responsibility accomplishing the technical and engineering aspect of the active projects and fixed proposals. From startup until commissioning, concerning the compressor and all related systems. In doing so, the Lead Engineer is responsible for internal engineering objectives and external technical communication with all contractors and suppliers.

What needs to be done?

The Lead Engineer ensures optimal project results concerning contract agreements, client satisfaction and Howden’s preceding reputation in delivering excellent compressors and adjacent systems. To succeed the Lead Engineer ensures (technical) coherence between all technical disciplines. He/She needs to keep in touch with the client and/or contractors and their demands without losing focus for internal process and engineering challenges in achieving results at the set milestones.

What do you need to bring?

A Bachelor degree in Engineering.
Technical knowhow of heavy industry related machinery and equipment. Preferably extended with knowledge and experience of engineering rotating equipment.
One must have a multidisciplinary view on engineering.
Easy to work with and lead a team of at least 5 or more engineers with different skills and specialties.
Used to convince and overcome objections and difficulties.
Knowledge of process technology.
Highly motivated to deliver high standards under pressure and being result oriented.
Good communication and time management skills.
Pro-active behaviour.
Good team player.
Fluent English communication skills, both written and verbal. Dutch is desired.
Willingness to travel (+/- 10%).

What will you get in return?

We offer an interesting and challenging position within a professional, international organization in which you play a key role in proposal and the project execution of our projects. As we consider talent management as key to the success of our organization, we offer opportunities for personal and professional development. We offer a salary package that is fully in line with the level of the position combined with an extensive package of fringe benefits.

About us

Chart Industries is a leading global manufacturer of highly engineered equipment servicing multiple applications in the clean energy and industrial gas markets. In 2023 Chart Industries acquired the Howden Group, and the entire group is now represented in over 40 countries worldwide with over 11,700 employees. Our vision is to enable the vital processes of our customers and thereby promote a more sustainable world. Learn more about us at www.chartindustries.com.

Production Assembler II - Night Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Chart's Assembler position plays a key role in the manufacturing process of Chart's products. This position will be responsible for helping to produce high quality manufactured products used all over the world.

What Your Day-to-Day Activities Will Be…

Assist in the assembly of air cooled heat exchangers
Observe and practice safety procedures and policies
Maintain required production and inspection records
Operating cranes and forklifts

*Please note, this is a night shift position

Your Education Should Be…

High School diploma or GED preferred

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling
Frequent pushing, pulling and handling of material
Occasional climbing and working at elevated positions
Repetitive hand movements during the assembly process

Your Professional Experience Should Be…

Minimum 6 months manufacturing experience in a fast paced environment
Familiarity with use of hand tools
Understanding and use of basic blueprints
Ability to use and understand various measuring devices

Chart is an equal opportunity employer...

Technical Support Engineer (Peterborough , England, United Kingdom, PE4 5HG)

The Role

If you're looking for a role where you can make a difference in critical industries, then a Technical Support Engineer position focused on steam turbines, reciprocating compressors, and auxiliary gearboxes could be for you. This dynamic role offers the opportunity to leverage your deep technical knowledge in areas of rotating machinery and control systems.

In this role you'll be providing support to our internal Aftermarket team, Field Service Engineers and directly to our customers on a variety of technical issues related to our products. You'll not only troubleshoot issues but also play a pivotal part in proactive maintenance strategies and continuous improvement initiatives. If you're a problem-solver, thrive on continuous learning, and want to contribute to the long-term reliability of products around the world, this role provides an exciting and rewarding career path.

The main purpose of the Technical Support Engineer is as follows;

Support the business and its customers in providing technical support both internally and externally.
To ensure the highest levels of customer satisfaction with our services and equipment, particularly those customers with Customer Care Agreements.
Being the main point of contact for remote monitoring of customer equipment.

Who are we?

In 2023, Chart acquired Howden, a leading global engineering business. Since 1854, Howden has been at the forefront of developing engineering solutions for the needs of industrial processes. Today, Howden provide mission critical air and gas handling products to clients with our range of highly engineered compressors, blowers, fans, steam turbines and rotary heat exchangers. The strategic combination of Howden and Chart expands our offering of products and solutions across the Nexus of Clean™ -- clean power, clean water, clean food and clean industrials.

Together we are advancing a more sustainable future, by helping our customers to increase their environmental & functional efficiencies and decarbonise their operations. We have a strong corporate identity and a clear purpose - you will be a member of our team shaping the future of the company and participating in helping our customers tackle some of the planet's most pressing issues.

What will you do?

Identify customer solutions

Use knowledge and experience to troubleshoot operational and maintenance problems on steam turbines, reciprocating compressors and gearboxes as efficiently as possible.
Review site operational data, and data recorded using remote monitoring, to enable the creation of operational assessment reports as per the requirements of the Customer Care Agreements (CCA’s).
Correctly record all technical queries and communications to allow all departments to review the current situation and the answers provided to the Customers.
Providing review and recommendations on findings in Field Service Engineer reports.

Growing the business

Review technical query trends and review the possibility of implementing new designs, procedures, or processes.
Identifies and define opportunities for development of products and services provided by the company.
Be a problem solver, and not afraid to use new ideas / initiatives and challenge our processes.
Preparation of Technical Service Bulletins for use both externally and internally.
Provide content to allow others to deliver customer training as and when required by the business.
Organise and support other resources that will provide training services.

Delivery of Customer Solutions

Ensure a swift technical response to all customer queries and follow the technical support process and guidelines.
Provide a strong link between Customer Services and Engineering
The technical support engineer is responsible for liaising with engineering and also with providing direct answers to customers based on their own knowledge and skill set.
Liaise with other areas of the business to ensure we can meet customer requirements and to resolve issues that may prevent us from meeting our customers’ expectations.
Strong team player and talented person to create relationships with their contacts.
Carry out any other reasonable request for a company or department level initiative or task as may be required from time to time.

What do you bring?

An ideal candidate would likely have the following profile:

Relevant qualifications in Engineering, minimum HNC.
Experience in the oil, gas, petrochemical, or power generation industries essential.
Experience working in an Aftermarket role, providing technical support services both internally and externally.
At least 3 years or equivalent experience in a similar role.
Strong technical knowledge of Rotating Equipment, Reciprocating Compressors & Steam Turbines.
Good understanding of the components and systems used in the operation of Rotating
Equipment, Reciprocating Compressors & Steam Turbines.
Knowledge of quality management systems.
Knowledge of relevant industry HSE practices and requirements.
Computer literate, organised, has the ability to stay focussed to complete complex tasks.
Good with detail and able to see tasks through to completion swiftly and effectively
Capable to respond effectively in a crisis situation.
Excellent written, telephone and face-to-face communication skills.

Travel

The role will be based in the UK at our Peterborough facility and will require occasional travel
A flexible approach to work location is possible within this role with blended home and office working once an initial training period is complete.

Our Benefits Package

This is a permanent position based at our office in Peterborough, including an early finish on Friday. Our range of fantastic benefits includes:

A flexible, hybrid working environment
Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunity employer...

Buyer (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

“Cooler Together” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so that’s how we got our “Cooler By Design®” tagline. Of course, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers and strive to work together as a team, making us “Cooler Together”. With our recent acquisition of Howden, we’re also “Stronger Together”. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. Chart is looking for bright, talented candidates that have a desire for a career in an exciting and evolving industry.
Chart Industries Company is currently seeking for an on-site Buyer based in Beasley, TX. The Buyer Is responsible for developing and leading supply chain initiatives and activities, including all aspects of supply chain procurement, material cost reduction, supplier negotiations, quality and delivery improvements, and supply base reduction.

What Will You Do?

Perform pre-bidding quoting.
Write and distribute RFQ’s; receive, analyze and negotiate bids, quotes and proposals.
Secures and analyzes quotations, negotiates price and terms with suppliers, and recommends suppliers with respect to cost, quality, and delivery competitiveness.
Ability to provide more than one valid sourcing option on RFQ Summaries.
Able to negotiate standard rates with potential suppliers that are improved when reviewed against current suppliers.
Oversee direct negotiations with suppliers related to pricing and terms and conditions.
Order high-value and complex specification materials to fulfill the project requirements.
Ensure all material is delivered to meet the production schedule in accordance with purchasing policies and procedures.
Expedite deliveries of components needed for production.
Review drawings and works with engineering and quality to ensure suppliers clearly understand the order requirements.
Ensure PO’s reference latest drawing revisions and provides suppliers with drawings, terms and conditions and customer specifications to procure compliant material.
Perform supplier qualification and supplier audits.
Oversee projects to ensure all schedules and deadlines are met.
Visit supplier’s facilities as necessary to qualify them as new sources and assist in resolution of production, design, quality, and/or delivery problems.
Support manager in meeting departmental goals and implementing cost saving ideas.

Your Physical Work Environment Will Require…

The physical demands described here are representative of those that must be met by an individual to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the associate is regularly required to stand, use hands and fingers to type, handle, feel, grasp, pushing, and pulling. The individual is frequently required to reach with hands and arms and talk and hear, operate office equipment (computer, copier, scanner, phone, etc.) and repetitive motion. The individual is occasionally required to climb, walk and/or balance, stoop, kneel, or crouch. The individual may occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus. This position is subject to both office and uncontrolled manufacturing shop environmental conditions, noise and oils as well as subjected to hazards such as, but not limited to, moving parts and vehicles, heat and chemicals.

Your Experience Should Be...

Bachelor’s degree from an accredited university in the following fields: Engineering, Sciences, Business Management, Supply Chain Management; or equivalent to 5+ years of progressive procurement experience within engineering and manufacturing business environments
Career background must include experience in organizations which design, engineer and assemble large machinery for use in various global applications including the gas and oil sectors.
Five (5) or more years of experience in planning, procurement or logistics in an MRP environment
4-6 years of extensive sourcing experience within a technically demanding environment
4-6 years of significant experience of delivering on negotiations
4-6 years of significant experience and knowledge of the supply base relevant to commodity
4-6 years of significant experience in establishing, driving and developing supplier relationships
Excellent communicator with interpersonal skills, and demonstrated ability to negotiate and influence
Ability to handle multiple projects and sustain day to day procurement activities.
Excellent problem solving capability along with computer proficiency.
Knowledge of materials management procedures
Detail-oriented, excellent time management skills in order to handle multiple projects and meet deadlines.
Supplier Management
Background in dealing with engineering, document control, and product management functions preferred.
Demonstrated working knowledge and theoretical understanding of purchasing concepts and practices (i.e. pricing parameter, delivery requirements, quality issues, supplier relationships, changing master schedules, etc.)
Competent with MS Office Suite, with emphasis on Excel

This position is not eligible for sponsorship.

Project Engineering - Lead Engineer (Kaohsiung City, Qianzhen District, Taiwan, 806)

What Will You Do?

Main purpose of job

As a Technical Engineer, you will undertake all technical activities relating to Howden range of turbo machine for process gas and ventilation application. You will provide technical support to project manager in the formulation of technical for rotatory heater, fan and compressor, as well as offer support and advice to sales proposals, operations, quality and aftermarket areas of the business.

Accountabilities

· Communicate any identified technical issues to appropriate project/functional manager and offer practical solutions where available.

· Design innovative technical solutions within agreed timeframes that adhere to Howden standards and meet customer requirements.

· Carry out necessary mechanical design calculations to enable initial required project information to be generated for issue to customer for review.

· Provide mechanical design engineering support to design draughtsman and other project team functional disciplines throughout detailed design project phase

· Plan and organize own workload to ensure timely availability of purchasing/manufacturing data/drawings

· Actively participate in essential design and safety reviews to ensure fitness of purpose of Howden products including consideration for operability, reliability, maintainability, etc. Additionally use such reviews to identify potential improvements of product ideas, resources and design processes

Lead 3D modelling activities and participate in customer 3D model reviews as required, ensuring that internal processes are standardized and developed as necessary.

· Evaluate and provide impartial technical reviews of sub-vendor bids to assist procurement activity.

· Ensure all work undertaken considers commercial and financial implications of task from a business perspective

· Ability to generate/modify Bills of Material and specifications in line with company standards.

· Ability to check and approve drawings, BoM’s etc.

· Provide technical support to shop floor regarding interpretation of drawings or assemblies.

· Drive Lean Manufacturing initiatives supporting cost reduction, efficiency, delivery and Quality improvements

· Use Continuous Improvement methodologies to promote Built in Engineering Quality concepts into Standard work. Collaborate with Operations, Quality, Commercial and Procurement teams to drive improved manufacturing and supply chain performance and early defect detection

· Support and advise on corrections for non-conformance process

Your Physical Work Environment Will Require…

Your work location will be in Kaohsiung, Taiwan

Your Experience Should Be...

Bachelor’s Degree in a Mechanical Engineering discipline or suitable experience

· Minimum 3 years' experience in a similar role

· Excellent general mechanical design engineering knowledge gained in a Rotating equipment environment

· Ability to create technical reports and make technical presentations

· Good team-working skills and ethic

· Broad range of communication skills with the ability to liaise with clients, senior management and shop floor personnel

· Basic English communication ability

· The ability to work under pressure and to tight deadline

· Sound commercial awareness

Knowledge of piping/assembly/packaging design

· Ability to create technical reports and make technical presentations

· Experience working in lean and continuous improvement environment and of using associated operational excellence and growth tools and processes

· Basic 2D/3D CAD skills

· Excellent technical knowledge of Pressure Vessels and Piping Systems and associated design codes such as ASME B31.3 and ASME VII

Our Benefits Package...

Howden provides a great benefits package in addition to an attractive salary. It also provides the chance to work in an exciting, fast-paced environment for a global engineering company.

Aluminum Mig/Tig Welder II (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

The diverse applications we service echo our commitment to sustainability – from providing full hydrogen solutions across the value chain, offering small and industrial scale carbon capture solutions to customers globally, creating water treatment systems responsible for treating 4.5 billion gallons of water per day in the U.S. and delivering clean water to over a billion people worldwide, providing equipment and solutions for mission critical space launches, decarbonizing the marine industry, and electrifying the mining space. Chart even contributes to the food and beverage industry by making some of your favorite carbonated beverages possible – If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)!

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart’s Tig Welder 1st shift (5am - 5pm) position plays a key role in the manufacturing process of Chart’s products. This position will be responsible for welding vessels of various types of metals using GTAW. Chart produces high quality manufactured products using radiography, vacuum mass spectrometry, and phased array ultrasonic testing. Chart complies with ASME, DOT, AAR, and EN pressure vessel codes.

What Will You Do?

Operation of cranes, forklifts, and aerial lifts
Welding of vessels through established manufacturing processes with minimum instruction and minimum supervision
Perform complete welding and finishing operations for the repair of units.
Accurately maintain required records (production traveler, material traceability, and production records).
Maintain cleanliness of assigned work area
Monitor equipment functionality and report maintenance needs
Assist other new welders in learning welding skills
Complete and follow all safety procedures and policies
Complete company provided training to effectively perform required job responsibilities
Other work as assigned

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling
Frequent pushing, pulling and handling of material
Occasional climbing and working at elevated positions
Repetitive hand movements during welding operations

Your Experience Should Be...

Must have 7 or more years of relevant experience
High School diploma or GED
Completion of a Welder Training Program
Proficient in all positions with GTAW
Proficient in knowledge of blueprint reading and welding symbols
Proficient in welding best practices
Proficient in visual inspection
Must complete and pass welding test

Tig welding: 2" SCH 80 aluminum with backing 6G GTAW. Additional testing in the 2G, 3G, and 6G for qualifications upon being hired. First week will be in the testing lab to finish qualifications.
Ability to:
- Adhere to Company Standards and Values
- Meet expectations for attendance and performance
- Meet deadlines for assignments
- Interact personably with co-workers and associates

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Mechanical Engineer (Orem, UT, United States, 84057)

Ensuring Chart’s Success…

“Cooler By Design” – Chart’s core business is centered around the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the products we design and build are pretty cool too. Also, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out – all the way from conceptual design to installation and commissioning of equipment on-site. Chart’s mission is to provide full solutions across the Nexus of Clean™ – clean power, clean water, clean food, and clean industrials. The diverse applications we service echo our commitment to sustainability – from providing full hydrogen solutions across the value chain, offering small and industrial scale carbon capture solutions to customers globally, creating water treatment systems responsible for treating 4.5 billion gallons of water per day in the U.S. and delivering clean water to over a billion people worldwide, providing equipment and solutions for mission critical space launches, decarbonizing the marine industry, and electrifying the mining space. Chart even contributes to the food and beverage industry by making some of your favorite carbonated beverages possible – If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)!

We are looking to add a Mechanical Engineer to our team in Orem, UT. The Mechanical Engineer will take responsibility for the conceptual design of the process and unit operations, and will work with the team to develop next-scale designs and processes. This person must work well within a small team environment and requires someone who is comfortable operating autonomously with open-ended tasks. You will have the opportunity to interact with every part of the technology development from design of new and novel equipment and experiments to detailed large-scale equipment design, sourcing, and operation. It is intellectually engaging work on complex, unique, and novel problems.

What Your Day-to-Day Activities Will Be…

Design parts and equipment for Cryogenic Carbon Capture test platform
Create equipment sizing and plant layouts using 3D parts and assemblies in SolidWorks
Participate in operating skid-scale test equipment
Communicate and present status updates on projects
Provide support for engineering team
Prepare process equipment data sheets and equipment lists
Prepare Process Flow Diagrams
Assist in the development of Piping and Instrumentation Diagrams
Assist in the preparation of Start-up and Operating Manuals
Build and assemble test equipment prototypes and structures
Some travel – 10% or less focused on site visits and commissioning

Your Professional Experience Should Be…

Experience with a CAD program (Solid Works or equivalent)
Knowledge of engineering first principles, especially thermodynamics and heat/mass transfer and ability to apply those principles to real-world systems
Proven teamwork skills
Sound organizational skills for completing tasks as scheduled
Strong communication skills both verbal and written for the purpose of explaining challenges and solutions internally, and presenting externally
Good interpersonal skills to successfully interface other engineering disciplines and customers
Working knowledge of Microsoft Office

We prefer candidates that also have the following:

2 to 5 years of mechanical engineering experience (or educational equivalent)
Knowledge of cryogenic process technologies which can include cryogenic air separation, natural gas liquefaction, hydrogen liquefaction, helium processing and liquefaction, etc.
Knowledgeable in natural gas processing technologies
Computer programming expertise in one or several of C++, C#, Java/JavaScript, or Python
Some experience and interest in control system and human machine interface software
Understands basic applicable engineering/electrical/safety codes

Your Physical Work Environment Will Require…

The ability to frequently sit for extended periods of time, stand, walk, use hands and fingers, handle or feel, and reach with hands and arms. This position is occasionally required to sit, climb, balance, kneel, crouch, or crawl. Lifting of 50 pounds may be required. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Duties include lengthy visual requirements on computer monitors.

Your Education Should Be…

Bachelor’s in Mechanical Engineering or Manufacturing Engineering is required
Master’s Degree in Mechanical Engineering is preferred

Chart is an equal opportunity employer...

Need an Accommodation...

Welder (La Crosse, WI, United States, 54601)

Ensuring Chart’s Success…

“Cooler Together” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so that’s how we got our “Cooler By Design®” tagline. Of course, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers and strive to work together as a team, making us “Cooler Together”. With our recent acquisition of Howden, we’re also “Stronger Together”. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too. Interested to learn more? Take a tour of Chart City (https://chartcity.chartindustries.com/) to get a feel of how Chart equipment solutions impact our daily lives. Chart is looking for bright, talented candidates that have a desire for a career in an exciting and evolving industry. This could be you!

Welders starting wage is $25.40 per hour with a $5.00 premium on second shift and $7.50 premium on third shift! With experience, make up to $40 per hour.

What Your Day-to-Day Activities Will Be…

Must train and pass A.S.M.E. processes for MIG and TIG, both AC and DC, and to the 6G level for AC.
- The 6G and DC processes will be performed on an infrequent basis.
Must weld to x-ray quality at all times and when required, pass x-ray and dye penetrant check of welds.
Assembles and welds various size headers and related sub-assemblies.
May weld with other processes and varied weldments and metals as warranted.
Works from drawings and specifications.
Must identify material and markings to ensure proper piece parts and identification codes are present.
Identify and use proper Work Instructions and other related specifications.
Must check parts prior to assembly to determine if, after assembly and welding, parts will be within tolerance.
May rework piece parts prior to assembly to meet drawing specifications and tolerances.
Responsible for quality of weld joint and proper identification of the weld.
Repair weld defects on headers and related sub-assemblies using proper repair procedures.
Set up welding machines, check to see if the machine is operating properly, and set controls for proper welding conditions.
Perform minor maintenance on all welding machines such as change torch, foot pedal, fuses, load and adjust MIG wire feeder, and check coolant reservoirs daily.
Set up and operate portable plasma cutter.
Preheat preparation prior to welding per instructions.
Pre-bow assemblies as required.
Required to operate straightening press to obtain specified tolerances on finished assembly.

Your Education Should Be...

Must have a certificate/degree in welding from a certified technical college or 12 months of professional welding experience.

**Sponsorship is not offered for this role.

Machines and Equipment

Welding Machines (MIG & TIG)
Portable Plasma Cutter
Positioner
Oxygen Acetylene Torch
Small Hand Tools
Cleaning Tanks
Various Hand Tools
- Wire Brush, Chisel, & Burnisher
Hand and Electric Trucks
Overhead and Jib Hoists
Various Jigs and Fixtures
Bench Grinder
Simple and Complicated Measuring Devices
Straightening Press and Related Fixturing

Knowledge, Skills, and Abilities

The incumbent must have sufficient knowledge and ability to:
Use and interpret sub-assembly drawings.
Must have good dexterity and hand-eye coordination.
Understand and work with welding codes, techniques, and special instructions.
Use measuring devices and have basic knowledge of math.
Work with both MIG and TIG weld processes on aluminum and other metals when necessary.
Work closely with support groups such as Auditors, Engineering, and Supervisors.
Work with fixturing and straightening press to obtain specified tolerances on completed assemblies.
Responsible for quality workmanship and requirements to reduce or eliminate hold points.
Works in an average factory environment. Exposed to the following conditions: heat, sharp edges, sometimes above-average noise, burns, fumes, smoke, dust. Protective equipment and clothing provided. Works in awkward positions: bending, reaching, pulling, pushing, standing, and sitting. Lifting 0 to 50 lbs; most lifting by hand. When lifting over 50 lbs, two people are required.

Your Physical Work Environment Will Require…

Works in good shop conditions with occasional exposure to heat, sharp edges, and noise. The incumbent is exposed to aluminum chips, dust, and oil. Requires standing, bending reaching, and pulling. Most lifting, 0-20lbs.; some lifting 20-50lbs. When lifting over 50lbs., two people are required.

The employee who performs this job as responsibility to maintain proper housekeeping in the work area and keep machines in good operating condition. Is also responsible for safety and quality workmanship and procedures. They may receive help from others when loading and unloading parts.

The above statements are intended to describe the general nature and level of work performed by individuals assigned to this classification. It is not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required for personnel so assigned.

Our Benefits Package...

Our Chart team members give so much on daily basis to get the job done, so we want to make sure we bring you and the people you care about peace of mind. We give you access to financial and physical wellness tools and support, as well as options to balance work and home life, with a few perks thrown in to keep it fun. Take a look below to find out more.

Our Benefits | Chart Industries

Senior Engineer (Hosur, Tamil Nadu, India, 635103)

Ensuring Chart’s Success…

Our vision, "Providing engineered solutions to enable a better tomorrow”, embodies our commitment to innovation and sustainability. Every decision we make contributes to a safer, stronger, and more resilient future for our customers, our communities, and each of us.

Our mission, "We connect our people, leading technologies, and global expertise to deliver innovative and sustainable solutions for our customers and the world around us", focuses on using our strengths to achieve success. We bring together world-class talent, leading technologies, and unmatched global expertise to deliver innovative and sustainable solutions. The strength of our people, our partnerships, and our pursuit of excellence drives us forward.

Our Values – The Foundation of Our Success:

Our five values define how we work, how we collaborate, and how we grow:

Safety Above All
Here for Our Customers
People Make the Difference
Pursue Excellence
Passion for Results

What Will You Do?

To lead and manage the reciprocating compressor assembly operations, ensuring productivity, quality, safety, and on-time delivery by effectively coordinating workforce, materials, and technical requirements.

Key Responsibilities -

Lead the assembly operations for reciprocating compressors, ensuring adherence to daily production targets.
Supervise and guide assembly teams.
Ensure compliance with mechanical drawings, specs, tolerances, standard assembly procedures and shop testing standards.
Review and improve SOPs, work instructions, and workflow efficiency in the assembly & testing area.
Monitor and control quality at each stage of assembly; coordinate with QA/QC for stage and final inspections.
Drive 5S, lean manufacturing practices, and continual improvement activities.
Manage manpower planning, performance monitoring, and skill development of the team.
Coordinate with planning, stores, purchase, and design & engineering departments to ensure availability of material and clarity in designs/drawings.
Ensure all team members adhere to safety norms, PPE usage, and participate in safety audits and training.
Support testing team during test bench trials and validation of compressor assemblies.
Maintain detailed records of reworks, NCRs, and initiate corrective and preventive actions.
Must adhere strictly to Quality Management, safety and environmental management standards (5'S, ISO 9001, ISO 45001, ISO 14001, etc.)

Your Physical Work Environment Will Require…

Use of PPE.

Must be able to work on shopfloor/assembly line environment.

Frequent standing, sitting, walking, bending, stooping, twisting and occasional crawling.

Occasional climbing and working at elevated positions.

Your Experience Should Be...

B.E. in Mechanical/Production Engineering or related field.
Minimum 4-5 years of hands-on experience in reciprocating compressor or heavy rotating equipment assembly, with at least 2 years in a supervisory role.

Key Skills -

Strong knowledge of reciprocating compressor components and working principles.
Ability to read and interpret mechanical drawings and assembly manuals/sop's.
Knowledge of tools like measuring instruments, torque wrenches, dial gauges, micrometers, etc.
Team handling and shift management.
Basic knowledge of ERP systems and MS Office.
Familiarity with ISO 9001, safety, and 5S practices.

Sub Arc Welder - Night and Day Shift Availability (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Chart Industries in Beasley, TX is looking for experienced welders for our Header manufacturing line. This position requires the ability to work overtime and pass 2 weld tests - a 6G Tig test on carbon steel 2” pipe and a 2G weld test. Chart’s welders play a key role in the manufacturing process of producing Air Cooled Heat Exchangers.

We currently have the following welding roles and shifts available:

Sub Arc Welder

Must be able to pass a Sub Arc Welding or SAW test. This role is responsible for performing Sub Arc Welding on the internal/external joints and end plates of a Header box.

Night Shift - 4

Day Shift - 1

What Will You Do?

Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques
Ability to lay-out, burn holes, fit and weld nozzles
Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process
Inspects completed welds to determine structural soundness
Performs a variety of tasks
Promotes and supports safety and production
Makes quality visual U.T. and x-ray welds

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

Must be able to work inside and outside. Regular exposure to welding debris, heat, cold, dark and bright environments.

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS

Safety Glasses
Steel Toe Shoes
Ear Plugs
Gloves
Hard Hats
Face Shield (when needed/task specific)

PHYSICAL REQUIREMENTS:

Walking
Standing
Using hands
Bending
Lifting up to 50lbs
Sitting

Your Experience Should Be...

Minimum Experience:

1-3 years related experience

Skills Required (i.e. certifications, licenses, registrations, etc.):

May be required to complete an apprenticeship and/or formal training in area of specialty

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Ability to read and interpret shop drawings
Ability to operate overhead-crane
Demonstrate a high-regard for safety by following all safety rules and procedures and leveraging Stop Work Authority when necessary
Familiarity with welding machines and hand tools
Knowledge of standard concepts, practices, and procedures within a particular field
Ability to rely on experience and judgment to plan and accomplish goals with quality an in an efficient manner
Ability to work under general supervision
Ability to work different shifts
Ability to pass 6G Tig test on carbon steel 2” pipe preferred
Ability and willingness to learn to operate basic cutting equipment
Ability to lift up to 50 lbs
Possesses a positive attitude

Business Controller (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for a Business Controller, who will join our Finance team and will support in making a valuable difference in the century to come.

The Business Controller is the Financial business partner to the business, direct and indirect departments within the organization, assisting them in achieving the organizational goals and identifying risks and opportunities. You will be working from our manufacturing plant in Rheden, The Netherlands.

What will you do?

Create support base by identifying needs of the business and aligning these with needs of Finance & Control department and organizational goals;
Create and maintain a professional working relation with peers of other departments.
Improve and implement integrated processes together with the business and the finance organization to be able to generate historic and forward looking financial information in an efficient, reliable, valid, complete and relevant way;
Drive an accurate forecasting, understand business drivers of Howden Thomassen Compressors and connect them to KPI’s (leading indicators);
Align current and future finance/controlling processes with processes the business and other locations or departments.
Identify trends internally and externally and discuss these with other departments;

Job Requirements

Bachelor degree in Finance or business administration / international business
Extensive experience in a similar or comparable role in business control within a multinational company / high demanding stakeholder environment

Good communication skills, being able to translate complex financial information to the business, supplemented by an outgoing and winning together mentality;
Business intelligence skills/experience.
Experience in continuous improvement and changing a mind-set within a department / organization;
Used to deal with deadlines and tight planning & control cycle.

English fluent verbal and in writing

About the company

Agent logistique (Meyzieu , N/A, France, 69330)

Poste à pourvoir

Howden Solyvent Ventec (230 pers. 45M€ CA) est une des filiales industrielles du groupe mondial Chart Industries, fabricant mondial de premier plan d’équipements et de solutions hautement techniques pour les marchés de l’énergie, du nucléaire, du ferroviaire, de l’industrie et des gaz industriels (11200 pers, 40 pays).

Acteur majeur du secteur de l'aéraulique, HSV vend, conçoit, fabrique et teste des ventilateurs industriels. L’entreprise s’adresse au marché mondial des industries et propose la gamme de ventilateurs la plus large, du produit standard à la solution sur-mesure.

Dans le cadre d'un remplacement au sein de notre équipe logistique, nous recherchons un(e) Réceptionnaire / Magasinier motivé(e) et rigoureux(se) pour assurer la gestion des flux entrants et sortants de marchandises, dans le respect des règles de sécurité et des procédures qualité.

�� Vos missions principales :

Réception :

Accueillir les chauffeurs dans le respect des consignes de sécurité.
Décharger et contrôler les livraisons (quantité, qualité, délais), émettre les réserves si nécessaire.
Enregistrer les commandes et certificats matière dans le système informatique.
Rédiger les non-conformités et en informer le responsable.
Acheminer les marchandises vers les zones concernées (magasin, atelier, qualité).
Gérer les retours fournisseurs pour les produits non conformes.

Magasin :

Assurer le rangement selon la politique de stockage.
Préparer les composants et consommables pour la production.
Garantir la cohérence entre le stock physique et informatique.
Participer aux inventaires tournants et annuels.
Suivre les niveaux de stock et passer les commandes nécessaires.
Gérer les consommables de production (EPI, chiffons, etc.).

Tâches communes :

Évacuer les bennes (bois, carton, DIB…) et relancer les prestataires.

Maintenir un environnement de travail propre et sécurisé.

✅ Profil recherché :

Expérience en réception et/ou magasinage en environnement industriel demandée.
Maîtrise des outils informatiques de gestion des stocks.
Sens de l’organisation, autonomie et esprit d’équipe.
CACES et connaissance des règles HSE nécessaires.

Si vous vous reconnaissez dans cette offre, n'hésitez plus, postulez!

Maintenance Tech I&E (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

What Your Day-to-Day Activities Will Be…

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

Performs daily, weekly, and monthly preventative maintenance on all plant equipment
Performs troubleshooting, problem solving, and countermeasure activities on all production and facility equipment
Performs mechanical maintenance with frequent electrical (480V, 208V, 120V, 24VDC) and controls-related troubleshooting
Dismantles machines or equipment using hand tools or power tools to examine parts for defects and repairs or replaces
Completes daily maintenance paperwork for assigned Work Requests and Checklists
Assists with installing conduit and wiring for new equipment installations
Performs special duties as assigned by Maintenance Supervisor/Manager

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Thorough understanding of maintenance troubleshooting for electrical, mechanical, hydraulic and pneumatic manufacturing equipment
Working knowledge of 480 Volt 3 phase power, logic controllers, motor starters and variable frequency drives
Ability to read and follow written instructions
Ability to read and interpret electrical and instrumentation drawings and specifications

Your Education Should Be…

Minimum Education:

High School Diploma or Equivalent

Trade or Technical school a plus

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

Mostly Outdoor/Shop Environment
Must be able to work outdoor and indoor

PHYSICAL REQUIREMENTS:

Walking
Standing
Using hands
Bending
Lifting
Sitting
Climbing

Your Professional Experience Should Be…

Minimum Experience:

5+ years of electrical maintenance experience

2+ years of experience with CNC Machine Repair

2+ years of experience in a manufacturing environment desirable

Experience with troubleshooting PLC based control systems

Strong background in electrical troubleshooting

Skills Required: (i.e. certifications, licenses, registrations, etc.):

Welding and fabrication skills considered a plus

Chart is an equal opportunity employer...

Need an Accommodation...

Maintenance Technician (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Chart's Maintenance Tech position plays a key role in the service and repair of Chart's manufacturing equipment. Chart's Beasley, TX facility is currently seeking candidates interested in a career that requires technical ability, problem solving, and dedication. This position performs a variety of functions including but not limited to the service, installation and repair of electrical, mechanical, hydraulic and pneumatic equipment within the manufacturing facility.

"Chart’s vision is to be the global leader in the design, engineering and manufacturing of cryogenic process technologies and equipment for the Nexus of Clean™ - clean power, clean water, clean food and clean industrials, regardless of molecule.” – Jill Evanko, CEO of Chart Industries
“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

What Your Day-to-Day Activities Will Be…

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

Performs daily, weekly, and monthly preventative maintenance on all plant equipment
Performs troubleshooting, problem solving, and countermeasure activities on all production and facility equipment
Performs mechanical maintenance with frequent electrical (480V, 208V, 120V, 24VDC) and controls-related troubleshooting
Dismantles machines or equipment using hand tools or power tools to examine parts for defects and repairs or replaces
Completes daily maintenance paperwork for assigned Work Requests and Checklists
Assists with installing conduit and wiring for new equipment installations
Performs special duties as assigned by Maintenance Supervisor/Manager

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Thorough understanding of maintenance troubleshooting for electrical, mechanical, hydraulic and pneumatic manufacturing equipment
Working knowledge of 480 Volt 3 phase power, logic controllers, motor starters and variable frequency drives
Ability to read and follow written instructions
Ability to read and interpret electrical and instrumentation drawings and specifications
Flexible to plant's on call needs

Your Education Should Be…

Minimum Education:

High School Diploma or Equivalent
Trade or Technical school preferred
Allen Bradley and/or Siemens PLC training and experience preferred

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

Mostly Outdoor/Shop Environment with exposure to heat, cold, wet, dry, windy, loud noises
Must be able to work outdoor and indoor
Must be able to lift, push, pull, carry 50 lbs
Must be able to work in confined spaces in between and underneath equipment
Must be comfortable working at height
Must be able to squat, bend, crouch, work on hands and knees and twist.

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:

Safety Glasses
Steel Toe Shoes
Ear Plugs
Gloves (when needed)
Hard Hats (when needed)

Your Professional Experience Should Be…

Minimum Experience:

3+ years of electrical maintenance experience
1+ years of experience with CNC Machine Repair
1+ years of experience in a manufacturing environment desirable
Experience with troubleshooting PLC based control systems desired
Strong background in electrical troubleshooting highly recommended

Skills Required: (i.e. certifications, licenses, registrations, etc.):

Welding and fabrication skills considered a plus

Chart is an equal opportunity employer...

Need an Accommodation...

HSE Manager/RSPP - Industria (Bagnolo Cremasco, Cremonia, Italy, 26010)

Ensuring IMB - Chart’s Success…

IMB Srl, part of CHART INDUSTRIES Inc., a world leader in the development of technical solutions for the cryogenic, petrochemical and automotive industries, is looking for an HSE MANAGER/RSPP for the site located near Cremona.

What Your Day-to-Day Activities Will Be…

The ideal profile is well versed in all industry regulations, constantly and proactively updates and acts as a point of reference for figures in the company's prevention hierarchy, prevention actors, various representatives, management and all Workers. The resource is responsible for coordinating all activities related to Safety, Environment, Health issues and updating related documentation, in synergy with the local HSE Department and the HSE Director.

Specifically, the position involves the following tasks:

- Analyze production processes, factory operations and related business risks in order to identify appropriate preventive and protective measures.

- Ensure the application and compliance with current Health, Safety and Environmental regulations, providing support to Management in order to facilitate company coordination and uniformity.

- Ensure that the Organization is aware of its legal obligations regarding Health, Safety and Environment, keeping it constantly informed of the different administrative arrangements necessary to meet these obligations;

- Support the HSE Director in drafting, implementing and maintaining policies, procedures, operating instructions and overseeing processes to ensure compliance with the requirements of Management Systems and ISO 14001 and 45001 Certifications.

- Promote the establishment of periodic Health, Safety, Environment, ESG and Sustainability goals at the plant level, specifying action plans and resources required, and systematically monitoring their proper fulfillment;

- Promote corrective/preventive actions and opportunities for improvement, spurring staff to acquire skills and knowledge necessary to perform their duties;

- Promote the proper use of root cause analysis and identification tools in order to avert accidents or problems of all kinds in the workplace.

- Manage and plan safety and environmental training for relevant personnel, appropriate PPE and health surveillance.

Requirements & Qualifications...

- Bachelor's degree or technical high school preferably in a mechanical field
- Possession of RSPP qualification;
- Previous experience of 5 years in a similar role gained within production realities, possibly engineering sector;
- Thorough knowledge of relevant regulations;
- Good knowledge of the English language
- Qualified to exercise the role of safety trainer

IMB - Chart is an equal opportunity employer...

IMB – Chart Industries is committed to a diverse and inclusive workplace. IMB - Chart Industries is an equal opportunity employer and does not discriminate based on race, national origin, gender, sexual orientation, disability, age, or other legally protected status

Skilled Fitter - Test (Renfrew, Scotland, United Kingdom, PA4 8XJ)

The Role

The main purpose of the Skilled Fitter - Test is as follows:

Set up Oil injected and Oil free Screw Compressors on dedicated test beds and assist in test set up of Turbo Compressors/Screw compressor Packages.
Fit all related pipework to the Screw Compressor in preparation for mechanical testing.
Laser align Screw Compressors and any other drive train equipment required for testing.

We are offering a starting salary of £37,500 for this role, rising to £39,000 after completing training. Maximum earnings including the x1.33 shift pattern and overtime is £53,500. The team currently operate a three-shift rotating structure with a rate of x1.33, consisting of early shift (6am-2pm), back shift (2pm-10pm) and night shift (10pm-6am), Sunday Night - Friday Early. Additional overtime available out with the standard shift pattern (All overtime at 1.5).

Who are we?

Since 1854, Howden has been at the forefront of developing engineering solutions for the needs of industrial processes. Today, Howden provide mission critical air and gas handling products to clients with our range of highly engineered compressors, blowers, fans, steam turbines and rotary heat exchangers.

In 2023, Chart acquired Howden. Chart Industries is a leading global manufacturer of highly engineered equipment servicing multiple applications in the clean energy and industrial gas markets

What will you do?

Set up Oil injected and Oil free Screw Compressors on dedicated test beds and assist in test set up of Turbo Compressors/Screw compressor Packages.
Ensure all related Safety and Mechanical documentation is complete during test set up and removal.
Conform to all aspects of HCO Quality Management system including the fulfilment of all relevant procedures, including all WSIs to ensure conformance to international standards.
Deliver Quality product in a timely manner whilst contributing to efficient and effective manufacturing principles to ensure compliance with cost forecasts.
Contribute & comply with accurate collation of Shop Floor documentation information. To ensure compliance to internal and external requirements.
Provide training support for Apprentices and work colleagues to ensure appropriate skill transfer.
Interact & respond to all aspects of HBE supporting cost reduction, efficiency, delivery and Quality improvements
Ensure adherence to company environmental, health and safety standards in compliance with company policies to ensure a safe working environmental and the minimisation of environmental impact.
Dispose of all waste in accordance with site waste segregation requirements.

Skills, knowledge & behaviours

Essential skills, knowledge & behaviours

Recognised Mechanical fitting apprenticeship and relevant qualifications.
Rotating equipment experience i.e. compressors, pump and turbines.
Experience in a Mechanical testing environment and familiar with related safety procedures and processes.
Engineering Drawing interpretation ability
Good communication skills

Desirable skills, knowledge & behaviours

Previous experience of precision manufacturing & assembly processes
Lifting & Slinging and forklift certification
Electrical systems awareness
Flexibility
Lean Manufacturing Skills
General Environmental Health & Safety awareness

Our Benefits

A competitive salary of £33,500, with the opportunity to earn shift allowance with the team currently operating a three-shift rotating structure with a rate of x1.33, consisting of early shift (6am-2pm), back shift (2pm-10pm) and night shift (10pm-6am), Sunday Night - Friday Early. Additional overtime available out with the standard shift pattern (All overtime at 1.5).
Generous holiday entitlement package.
Howden Pension Plan
Healthcare cash plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing.
Group Life Assurance plan at 3x salary.
Group Income Protection plan.
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering.
Dedicated Help@Hand Service – Free Counselling, Physiotherapy, financial support etc. Training & Development Opportunities.
Enhanced Maternity, Paternity, shared parental and adoption leave pay.

Chart is an equal opportunity employer

EC&I Field Service Engineer (Peterborough , England, United Kingdom, PE4 5HG)

The Role

Based anywhere across the UK, the EC& Field Service Engineer will have 2 main responsibilities;

1. Worldwide Electrical, Control and Instrumentation (EC&I) onsite technical assistance to customers during: overhaul, repair, maintenance, upgrades, fault finding and installation and commissioning of steam turbines.
2. To provide a full engineering service support for our customers. To develop and manage exceptional customer relationships through excellence in terms of technical capability and also through personal interaction with customers.

Who are we?

What will you do?

Accountabilities;

To deliver a very high technical and professional level of service to our customers, with significant focus on safety and quality. The aim is to achieve on time in full, to schedule and right first time.
Provide detailed Site Reports to the required standard that among other things highlight actions which may need to be taken and seek opportunities for improvement.
Supervise the activities of Company or Customer supplied Technicians, be responsible for their day-to-day safety requirements, site activities and discipline.
Follow health and safety at work procedures and complete required Risk Assessments.

What do you bring?

Essential skills, knowledge and behaviours

Experience with the following PLC and HMI programming tools. Read and troubleshoot Ladder / Function block for the following systems; Rockwell - Studio 5000 and RS Logix 5000, Factory Talk, Logix 500. Siemens - PCS7, Step 7, WinCC, TIA Portal, Schneider - Control Expert / SCADA Expert, Governor – Woodward 505, AVR – Baslter DECs 200/250
Familiar with the following communications - Modbus Communications RS485 and TCP. Profibus and Profinet, Control Net. Basic TCP Networking.
Familiar with Power Generation on Gensets 5-30MW areas include general governor and excitation Systems. Operational modes - Droop and Isochronous control, Active and Reactive power, Pressure regulation.
Knowledge of site maintenance and repair of Steam Turbines
Develop and manage good customer relationships through the provision of professional customer management
Proven experience of a strong focus on health and safety
Ability to supervise others at site during complex installation, commissioning and maintenance activities.
Ability to work as part of a team or as an individual
Proficient in Microsoft Office products and able to produce detailed written technical documents including but not limited to risk assessments, site reports, root cause analysis of failures, method statements, scopes of work and project plans.
Experienced working on international assignments including where English is not the main language
Hold a full UK driving licence

Desirable skills, knowledge and behaviours

Knowledge of site installation and commissioning of Steam Turbines. Training to be provided if required.
Previous experience working offshore.

Our Benefits

Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunities employer

Machine Operator I - 3rd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

What Will You Do?

Assist in the fabrication of unique sets of material needed for production.
Observe and practice safety procedures and policies.
Maintain required production and inspection records.
Operating cranes and forklifts.

*Please note, this is a night shift position. - 3rd Shift

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, and walking.
Frequent pushing, pulling, and handling of material.
Repetitive hand movements during the production process.

Your Experience Should Be...

High School Diploma, GED or equivalent

Minimum 6 months manufacturing experience in a fast paced environment.
Familiarity with use of hand tools.
Understanding and use of basic blueprints.
Ability to use and understand various measuring devices.

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Production Assembler - Turblex (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Cooler By Design” – Chart’s core business is centered around the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the products we design and build are pretty cool too. Also, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out – all the way from conceptual design to installation and commissioning of equipment on-site. Chart’s mission is to provide full solutions across the Nexus of Clean™ – clean power, clean water, clean food, and clean industrials. The diverse applications we service echo our commitment to sustainability – from providing full hydrogen solutions across the value chain, offering small and industrial scale carbon capture solutions to customers globally, creating water treatment systems responsible for treating 4.5 billion gallons of water per day in the U.S. and delivering clean water to over a billion people worldwide, providing equipment and solutions for mission critical space launches, decarbonizing the marine industry, and electrifying the mining space. Chart even contributes to the food and beverage industry by making some of your favorite carbonated beverages possible – If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)!

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

We are currently seeking a Production Assembler for our Beasley, TX Facility to join our dynamic and fast-paced environment in the E&CFF business. Chart’s Production Assembler position plays a key role in the manufacturing process of Chart’s products. This position will be responsible for helping to produce high quality manufactured Turblex products used all over the world.

What Will You Do?

Assist in the assembly of Turblex products
Observe and practice safety procedures and policies
Maintain required production and inspection records
Operating cranes and forklifts

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling
Frequent pushing, pulling and handling of material
Occasional climbing and working at elevated positions
Repetitive hand movements during the assembly process
Proper PPE

Your Experience Should Be...

Minimum 6 months manufacturing experience in a fast paced environment
Familiarity with use of hand tools
Understanding and use of basic blueprints
Ability to use and understand various measuring devices

Our Benefits Package...

HSE Manager/RSPP - Industria (Bagnolo Cremasco, Cremonia, Italia, 26010)

Garantire il successo di IMB - Chart…

IMB Srl, parte della multinazionale americana CHART INDUSTRIES INC, leader mondiale nello sviluppo di soluzioni tecniche per l'industria criogenica, petrolchimica ed automotive, seleziona un/una HSE MANAGER/RSPP per il sito localizzato in provincia di Cremona.

Quali saranno le tue attività quotidiane...

Il profilo ideale è esperto di tutta la normativa del settore, si aggiorna costantemente e proattivamente e si pone come punto di riferimento per le figure della gerarchia aziendale della prevenzione, per gli attori della prevenzione, per i vari rappresentanti, per il management e per tutti i Lavoratori. La risorsa è responsabile del coordinamento di tutte le attività connesse alle tematiche di Sicurezza, Ambiente, Salute e dell'aggiornamento della relativa documentazione, in sinergia con il Dipartimento HSE locale e con il HSE Director.

In particolare, la posizione prevede i seguenti compiti:

Analizzare i processi produttivi, le lavorazioni di fabbrica ed i relativi rischi aziendali al fine di individuare le adeguate misure preventive e protettive.
Garantire l’applicazione e il rispetto delle normative vigenti in materia di Salute, Sicurezza e Ambiente, fornendo supporto alla Direzione al fine di facilitarne il coordinamento e l’uniformità aziendali.
Assicurarsi che l’Organizzazione sia a conoscenza degli obblighi di legge in materia di Salute, Sicurezza e Ambiente, mantenendola costantemente informata sulle differenti disposizioni amministrative necessarie a soddisfare tali obblighi;
Supportare il HSE Director nel redigere, implementare e mantenere policy, procedure, istruzioni operative e presidiare i processi al fine di garantire il rispetto dei requisiti dei Sistemi di Gestione e delle Certificazioni ISO 14001 e 45001.
Promuovere la definizione degli obiettivi periodici di Salute, Sicurezza, Ambiente, ESG e sostenibilità a livello di stabilimento, specificando i piani di azione e le risorse necessarie, e controllandone sistematicamente il corretto adempimento;
Promuovere azioni correttive/preventive e opportunità di miglioramento, spronando il personale ad acquisire competenze e conoscenze necessarie allo svolgimento delle proprie mansioni;
Promuovere il corretto uso di strumenti di analisi e di identificazione delle cause al fine di scongiurare incidenti o problemi di ogni genere sul luogo di lavoro.
Gestire e pianificare la formazione sulla sicurezza e ambiente per il personale interessato, i DPI idonei e la sorveglianza sanitaria.

Requisiti e Qualifiche...

Laurea o Diploma tecnico preferibilmente in ambito meccanico
Possesso della qualifica di RSPP;
Pregressa esperienza di 5 anni in ruolo analogo maturata all’interno di realtà produttive, possibilmente settore metalmeccanico;
Conoscenza approfondita delle normative di riferimento;
Buona conoscenza della lingua inglese
Abilitato all’esercizio al ruolo di formatore in materia di sicurezza

IMB - Chart è un datore di lavoro per le pari opportunità...

Come IMB - Chart Industries offriamo un ambiente di lavoro aperto e inclusivo, senza discriminazione di razza, nazionalità, genere, orientamento sessuale, disabilità ed età.

Header Fitter - Night Shift (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Chart Industries in Beasley, TX is looking for experienced fitters for our Header manufacturing line. This position requires the ability to work overtime and pass a 1G and/or a 2G Tig test on carbon steel 2” pipe. Chart’s welders play a key role in the manufacturing process of producing Air Cooled Heat Exchangers.

We currently have the following welding roles and shifts available:

Fitter

This role is responsible for performing fitting and tack welding plate or nozzles together to form a header box. This role may also be responsible for fitting and welding the root pass on end plates to header boxes.

Night Shift - 4

What Will You Do?

Fits, Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques
Ability to lay-out, burn holes, fit and weld nozzles
Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process
Inspects completed welds to determine structural soundness
Performs a variety of tasks
Promotes and supports safety and production
Makes quality visual U.T. and x-ray welds
Operate overhead cranes
General housekeeping of work station

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

Must be able to work inside and outside. Regular exposure to welding debris, heat, cold, dark and bright environments.

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS

Safety Glasses
Steel Toe Shoes
Ear Plugs
Gloves
Hard Hats
Face Shield (when needed/task specific)

PHYSICAL REQUIREMENTS:

Walking
Standing
Using hands
Bending
Lifting up to 50lbs
Sitting

Your Experience Should Be...

Minimum Experience:

1-3 years related experience

Skills Required (i.e. certifications, licenses, registrations, etc.):

May be required to complete an apprenticeship and/or formal training in area of specialty

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Ability to read and interpret shop drawings
Ability to operate overhead-crane
Demonstrate a high-regard for safety by following all safety rules and procedures and leveraging Stop Work Authority when necessary
Familiarity with welding machines and hand tools
Knowledge of standard concepts, practices, and procedures within a particular field
Ability to rely on experience and judgment to plan and accomplish goals with quality an in an efficient manner
Ability to work under general supervision
Ability to work different shifts
Ability to pass 1G and/or 2G Tig test on carbon steel 2” pipe preferred
Ability and willingness to learn to operate basic cutting equipment
Ability to lift up to 50 lbs
Possesses a positive attitude

CNC Machine Operator (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Cooler By Design” – Chart’s core business is centered around the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the products we design and build are pretty cool too. Also, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out – all the way from conceptual design to installation and commissioning of equipment on-site. Chart’s mission is to provide full solutions across the Nexus of Clean™ – clean power, clean water, clean food, and clean industrials. The diverse applications we service echo our commitment to sustainability – from providing full hydrogen solutions across the value chain, offering small and industrial scale carbon capture solutions to customers globally, creating water treatment systems responsible for treating 4.5 billion gallons of water per day in the U.S. and delivering clean water to over a billion people worldwide, providing equipment and solutions for mission critical space launches, decarbonizing the marine industry, and electrifying the mining space. Chart even contributes to the food and beverage industry by making some of your favorite carbonated beverages possible – If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

The CNC Machine Operator plays a key role in the success of our Header Manufacturing team. If you have extensive experience in CNC Machining, we invite you to apply!
The Beasley facility manufactures Air Cooled Heat Exchangers, Fiberglass fan blades and more. The end users of this equipment and these services include all the major LNG, petrochemical and air separation engineering on a worldwide basis. The facility is located in Beasley, Texas.

The following positions are available:

Day shift - 1

Night shift - 2

What Will You Do?

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

Follows instructions on how to set up machines at beginning of shift to ensure proper operations
Learns testing procedures to ensure optimum operations during production procedure
Maintains and cleans machines before and after shifts
Monitors machines during each procedure to ensure optimum operation
Performs random tests to ensure accuracy
Performs periodic checks to ensure quality production

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Ability to read a tape measure
Ability to read and comprehend shop drawings
In depth knowledge of safety practices and hazards related to machine operations
Ability to lift 50 lbs
Ability to operate a horizontal CNC Mill preferred
- Program the machine by using GibbsCam
Ability to operate a 3-axis CNC Mill using Siemens controls preferred
Ability to edit minor program parameters
Ability to operate a Band Saw preferred
Ability to change machine and tool offsets
Ability to operate head cranes
Ability to operate a variety of hand tools
- Deburr and clean headers following the machining process.
Ability to adjust vision focus
Ability to work shift work
Ability to meet production goals
Ability to complete tasks
Knowledge of basic mathematical principles
Knowledge of mechanical tools
Ability to work overtime when required

Your Physical Work Environment Will Require…

INTERACTION:

Works with supervisor
WORKING CONDITIONS:

Must be able to work inside & outside in manufacturing environments with exposure to heat, cold, wind, rainy and or dry conditions.

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:

Safety Glasses
Steel Toe Boots
Ear Plugs
Gloves
Hard Hat (when needed)

PHYSICAL REQUIREMENTS:

Using hands, fingers to handle or feel
Walking
Sitting
Standing
Stooping
Kneeling
Crouching
Crawling
Talking
Hearing
Lifting from 10 lbs to 25 lbs on a frequent basis
Lifting of 50 lbs on occasional basis

Your Experience Should Be...

High School Diploma or GED

6 months of relevant experience

6 months of experience in a Manufacturing/Industrial environment

Senior Engineer (Chennai, Tamil Nadu, India, 600077)

Ensuring Chart’s Success…

What Will You Do?

End to End Quality Assurance and Control activities for the Cooling fan starting from Inward material Quality Assurance to Warranty / Customer complaints handling.
Need to create and maintain Quality Management System requirements in the Product line.
Create and Maintain In-process PPAP for new products
Create Rework procedure for FRP blades and conduct periodic Process Audits to improve the process.
Liaison with Customers and TPIs for Stage clearance and Product clearance,
Coordinate with internal stakeholders to adhere & meet Product, Process, QMS & Customer requirements.

Your Physical Work Environment Will Require…

Need to be on the shop floor coordinating and overseeing activities for 5 to 7 Hrs. a day.
Able to conduct NDT test (Level 2) on a requirement basis
Open to travel to Customer site/office to understand and discuss Quality requirements, and observe the product running conditions and support trouble shooting of the product supplied (Approx. 30 days in a year)

Your Experience Should Be...

Bachelor’s degree in mechanical engineering / chemical technology / Diploma in Plastic technology
7 to 8 Years Experience in Quality Assurance Activities, 2 or more years of FRP parts
NDT Level 2 – UT (experience in FRP is a must)
Experience in overseeing Rework / Repair activities in FRP blades.
Experience in FRP Blade products is preferable
Six Sigma Green Belt certification is preferable

Inside Sales Rep (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

“Cooler Together” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so that’s how we got our “Cooler By Design®” tagline. Of course, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers and strive to work together as a team, making us “Cooler Together”. With our recent acquisition of Howden, we’re also “Stronger Together”. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. Chart is looking for bright, talented candidates that have a desire for a career in an exciting and evolving industry.

Chart Industries is currently seeking an on-site Inside Sales Rep based in Beasley, TX. The Inside Sales Rep will be responsible for quoting, input and management of customer orders.

What Will You Do?

What Your Day-to-Day Activities Will Be…
• Suggests and implements improvements in the sales administration process
• Implements the sales strategy of the organization within the inside sales team
• Works directly with end users, distributors, resellers, and agents regarding the sale of axial flow fans, fan parts, and air cooled heat exchanger parts
• Works as a conduit between the customer and fan engineering to address any issues relating to the equipment
• Responsible for providing customer support relating to the fan products
• Works with the customer and fan engineering to determine fan and fan part selection
• Works to support aftermarket sales on international quotations and projects
• Provides sales leads to Aftermarket Sales Team
• Follows-up and manages the sales orders through the internal Hudson process from order entry to shipment
• Ensures customer quotes are completed on timely basis and entered into Chart ERP system
• Works with Outside Sales and Aftermarket to manage customer relations
• Will manage large order projects, providing quotations to the customers, entering quotes, and updating statuses
• Driving critical projects to execution through collaboration with the production, warehouse & purchasing teams.
Other Activities:
• Coordinates department projects to meet deadlines
• Reports on sales metrics and monitors the team performance in accordance to production backlog.
• Any other responsibilities, as assigned

Your Physical Work Environment Will Require…

INTERACTION:
• Works with customers, operations team, warehouse team, scheduling & engineering in the execution of the sales orders and customer support regarding the products
WORKING CONDITIONS:
• Must be able to work inside & outside
REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE PLANT:
• Gasketed Safety Glasses
• Steel Toe Shoes
• Ear Plugs
• Hard Hat
• Gloves (when needed)
PHYSICAL REQUIREMENTS:
• Walking
• Sitting
• Standing
• Using hands
• Bending
• Lifting

Your Experience Should Be...

• Minimum 5-7 years of experience in inside sales and/or relevant management experience
• Proficient in Microsoft Word, Outlook, and Excel
• Proven work experience in managing a team, driving towards a defined goal with deliverables & accomplishments to share.
• Hands on experience with ERP systems
• In-depth knowledge of sales administration process

Your Education Should Be…
Bachelor’s Degree (preferred) or Equivalent work-related experience

Technical Sales Manager (Renfrew, Scotland, United Kingdom, PA4 8XJ)

The Role

We are searching for an experienced Technical Sales Manager (TSM) to join our busy and talented Screw Bareshaft Compressor Sales Division based in Renfrew.

As a TSM, you will provide technical support to key accounts as well as develop new customer opportunities, identify key routes to market and build relationships to achieve sustainable growth. The successful individual should have previous Compressor experience, preferably Screw, and will be strong in business development, value selling and key account management. You will foster a winning culture within the team and wider Screw Value Stream, as well as supporting the development of regional strategies for the Screw Bareshaft product and work with Regional teams to create a true One Howden process approach to achieving Global bookings targets.

This is a permanent position working 37 hours per week (Monday to Thursday 8am until 4.15pm & Friday 8am until 2pm). We offer hybrid working for this role which will allow you to enjoy the balance of home working and time in the office with the team in our modern, friendly offices which include free onsite parking.

Who are we?

What will you do?

Primary focus to identify and secure high priority opportunities that will deliver sustainable growth.
Develop existing client’s revenue return through forming strong partnerships and providing the best product, commercial and service offering to enable them to succeed.
Solicit enquiries for the supply of screw bareshaft compressors, influencing clients where possible to specify Howden.
Manage and assist in the preparation of tenders and further clarification of clients and company requirements.
Negotiating contracts with clients while maintaining agreed contribution levels.
Ensure, negotiated contracts are correct and of sufficient detail to pass to the Project Department for execution.
Assist, when required, in liaison with clients after orders have been received.
Utilise the CRM (Salesforce) in recording enquiries, proposals, turndowns.
Identify and report on new market/territory opportunities for our products.
Complete forecasts on a Quarterly and Annual basis.
Support the marketing function through reports, client interface, and intelligence data gathering in territory.
Ensure adherence to company environmental, health and safety standards in compliance with company policies to ensure a safe working environment and the minimisation of environmental impact

What do you bring?

An ideal candidate would likely have the following profile:

Process Gas and/or Process Refrigeration – ideally API619.
Technical knowledge of Air Handling equipment (e.g. Screw Compressors) preferred.
High energy and passionate about Sales
High degree of commercial savvy
Excellent presentation and communication Skills
Excellent negotiation skills

It’s a bonus if you have (but not essential)

Degree educated in an engineering discipline, or equivalent experience.
Sales experience in a high value and high specification business
Knowledge of rotating machinery markets including EPCs, end user and licensors
Experience in global business development and account management
Experience in Project Terms & Conditions

Our Benefits Package...

A flexible and supportive work environment.
Car allowance
Company Bonus Scheme
Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunities employer

Assistant Manager Quality (Hosur, Tamil Nadu, India, 635103)

Ensuring Chart’s Success…

What Will You Do?

End to End Quality Assurance and Control activities for the Reciprocating Compressor starting from Inward material Quality Assurance to Warranty / Customer complaints handling.
Need to create and maintain Quality Management System requirements in the Product line.
Establish and maintain SOPs for QA activities to ensure quality standards & procedures are met and aligned with customer requirements.
Create and Maintain In-process PPAP for new products.
Liaison with Customers and TPIs for Stage clearance and Product clearance,
Conduct Manufacturing and design reviews (DFMs) for new products and projects.
Ability to train small teams in Quality Practices and Systems.

Your Physical Work Environment Will Require…

Need to be in Shopfloor coordinating and overlooking activities for 3 to 5 Hrs. a day.
Able to demonstrate NDT test (Level 2) on requirement basis
Use of quality engineering methods in inspection
Coordinate with internal/external stakeholders to adhere & meet Product, Process, QMS & Customer requirements.
Open to travel to Customer site / office to understand and discuss Quality requirements, and observe the product running conditions and support trouble shooting of product supplied (Approx. 30 days in a year)

Your Experience Should Be...

Bachelor’s degree in mechanical engineering
10 to 13 Years Experience in Quality Assurance Activities, 2 or more years in handling end-to-end Quality activities
Experience in Reciprocating compressor products is preferable
NDT Level 2 in RT / UT and MPI / DPT methods preferable
Six Sigma Green Belt certification preferable

Agent logistique (Meyzieu , N/A, France, 69330)

Assurer le succès de Chart...

Technicien Intervention sur Site (Feignies, N/A, France, 59750)

Assurer le succès de Chart...

Votre environnement de travail physique exige...

Technicien Intervention sur Site (Feignies, N/A, France, 59750)

Ensuring Chart’s Success…

Howden est une entreprise internationale d'ingénierie, leader sur son secteur. Forte de plus d'un siècle d'expérience dans son domaine, l’objectif principal d'Howden est de fournir, à ses clients, des solutions de haute qualité pour le traitement de l’air et du gaz leur permettant ainsi d'améliorer leurs processus quotidiens.

Concepteur et fabricant de pièces d’étanchéité pour compresseur, notre société de renommée mondiale, CPI (Compressor Products International), filiale de Howden, recrute pour son unité française, Centre mondial d’excellence Recherche et Développement, basée à Feignies, à proximité de Valenciennes dans le nord de la France : Un(e) Technicien(-ne) d'Intervention sur Site (H/F).

Principales Missions / Activités

Sous la responsabilité du Responsable Intervention sur Site, vous êtes en charge de l’entretien, du dépannage et de la surveillance des compresseurs alternatifs chez nos clients en France et parfois à l’étranger (Europe, Afrique,...) selon les règles sécurité et la réglementation. Vous montez les pièces internes du ou des compresseurs de nos clients, vous effectuez l’expertise sur place et remplacez les pièces usagées.
Vous effectuez également la mise en service après réparation et assurez les préconisations au service maintenance du client (rapport d’intervention, informations aux équipes...).

Vous serez amené(e) à échanger régulièrement avec nos équipes production et commerciales, afin d’assurer le suivi de nos produits et les remontées de nos clients.
Egalement, il vous faudra vous déplacer fréquemment en France et parfois à l'international, ce poste demande donc une grande disponibilité/mobilité.
Vous avez la possibilité de rester sur votre lieu de résidence lorsque vous n'êtes pas en mission (présence ponctuelle à Feignies à prévoir).

Niveau de formation et/ou expérience

De formation Bac à Bac+2 minimum, idéalement en mécanique ou maintenance et/ou justifiant d’une expérience de 3 ans minimum dans le domaine mécanique, idéalement machines tournantes (turbines, turbomachines, ventilateurs, pompes, compresseurs …). Vous savez utiliser les outils bureautiques (Word, Excel). Rigueur, autonomie, précision, réactivité, capacité d’analyse, gestion des priorités, leadership et sens du service clients sont des atouts indispensables pour réussir dans cette fonction.

Vous aimez travailler en autonomie et faites preuve d’ouverture d’esprit, de curiosité et de prise d’initiative.
Vous avez le goût du terrain et une forte sensibilité pour la sécurité.
Package de rémunération attractif : participation aux bénéfices, retraite complémentaire, mutuelle, tickets restaurants, ...

Les avantages à travailler chez Howden

Entreprise mondiale - Assurer la liaison avec nos collègues dans 27 pays.
Nous offrons des opportunités mondiales et locales - plus de 6000 employés et ingénieurs de renommée mondiale, qui créent des développements de pointe.
Vous ferez partie de plus de 160 ans d'innovation et de développement qui se poursuivent aujourd'hui avec nos solutions numériques.

Chez Howden, nous avons une identité et un objectif d'entreprise forts - Vous serez membre de notre équipe, façonnant l'avenir du monde et abordant certains des problèmes les plus urgents auxquels la planète est confrontée.
Nos produits et notre organisation tournent autour de vous - Notre culture favorise le développement individuel pour améliorer notre atout le plus important : nos employés.

What Will You Do?

Your Physical Work Environment Will Require…

Your Experience Should Be...

Our Benefits Package...

Technicien d'intervention sur site (Feignies, N/A, France, 59750)

Assurer le succès de Chart...

Votre environnement de travail physique exige...

Technicien d'intervention sur site (Feignies, N/A, France, 59750)

Ensuring Chart’s Success…

Principales Missions / Activités

Niveau de formation et/ou expérience

Les avantages à travailler chez Howden

Your Physical Work Environment Will Require…

What Will You Do?

Your Experience Should Be...

Our Benefits Package...

External Inspector (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for an External Inspector, who will join our Quality team and will support the business in making a valuable difference in the century to come.

What Will You Do?

Provide and supervise inspections to ensure compliance with customer, our company and international requirements. This includes verifying the conformity of external parts in line with quality and safety with set laws and regulations, requirements, standards and specifications before delivery. Ensuring the quality compliance of parts before delivery of the parts by the suppliers will reduce the rework on supplied goods and contribute to increase the on-time-delivery.

Increase the 1st time right ratio for purchased parts (product and document requirement)
Reduce the rework and repair cost for purchased parts
Perform inspections timely after readiness notification by the vendors
Acquire knowledge on the necessary product specific aspects, and develop or upgrade SOP’s when relevant
Where applicable, train QC inspectors from local Chart entities

What do you need to bring?

Education Requirements:

Technical education: ability to understand technical drawings, purchasing specification and quality requirements
Basic knowledge of main production processes for cast and forged parts and of assembly processes
Basic knowledge of Quality Control and Quality Assurance processes

Experience Requirements:

Expertise(intermediate or advanced level) in NDE (for casted, forged and machined metallic parts) requirements and relevant certifications.
Level 2 / optionally Level 3 Inspector certification.
Optional Welding Engineer certification & International Welding Technologist (IWT)

Technical Requirements:

Welding Engineer certification & International Welding Technologist (IWT)
Expertise in NDE requirements and relevant certifications (European and American standards)

Language Capabilities:

English

Mobility & Travel Requirements:

55-60% of the time.

What will you get in return?

About us

Internal Inspector (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for an Internal Inspector, who will join our Quality team and will support the business in making a valuable difference in the century to come.

What Will You Do?

The Internal Inspector plays a key role in ensuring product quality and compliance within our compressor manufacturing operations. As a quality control and assurance function, this role supports the organization by verifying that assembled products meet internal specifications, industry standards, and client contractual requirements prior to final delivery to the customer.

The inspector is responsible for conducting in-process and final inspections during and after assembly, as well as overseeing performance test activities. This includes reviewing technical documentations, identifying non-conformities, and ensuring timely, accurate reporting. In addition to direct inspection responsibilities, he/she collaborates closely with production, engineering, project quality, and logistic teams to support overall operational efficiency.

Ensure timely execution of inspections in line with master planning and production schedules, minimizing delays and ensuring product readiness for delivery.
Stabilize inspection operations, quickly integrate into ongoing operations and ensure uninterrupted execution of internal inspections during assembly and testing phases
Build strong communication channels with production, quality, and project teams to ensure clear understanding of inspection priorities, immediate quality concerns, and reporting expectations.
Develop a Robust internal inspection framework, establish and standardize internal inspection protocols and best practices that enhance consistency, accuracy, and reliability across all inspection activities.

Who are you?

Education Requirements:

Technical education, Engineering or related discipline

Technical Requirements:

Knowledge of Technical Drawings & Documentation, how to read and interpret engineering drawings, product specifications etc.
Familiarity with Quality standards, Understanding of ISO 9001 and experience with industry standards such as API, PED, and ASME.
Basic knowledge of production and assembly processes

Experience Requirements:

Experience(basic level) in Industrial assembly and/or test in environments,
Quality or inspection related training/ certifications (NDT, Geometric dimensioning and tolerancing, FMEA) (desired)

About us

Junior Supervisor Assembly & Test (Rheden, Gelderland, Netherlands, 6991 GS)

The big picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for an Junior Supervisor Assembly & Test, who will join our Production team and will support in making a valuable difference in the century to come.

What will you do?

Responsabilities:

Coordinating assembly related tasks together with the Supervisor Assembly
Seeks solutions and takes care of keeping an good overview of all broken and defect parts in the shop
Proposes and discusses improvements on the shop floor
Frequently checks upon activities completed by shop floor employees and discusses results with the Supervisor Assembly and Mechanics
Processes administrative tasks in support of the Supervisor Assembly (E.g. time registration, material orders, inspections and calibrations)
Oversees execution of company, maintenance, labor and safety instructions plus reports deviations to Supervisor Assembly

What do you need to bring?

Required knowledge of:

Machine applications, shop floor skills and repair skills
Machine equipment and tools
Organizing, planning, communication and delegating
Ability to read technical drawings and specifications
Assessment of defects and deviations

Required competences:

Taking initiatives
Cooperative
Quality awareness
Safety, health and environment awareness

What do we offer?

About us

Projektingenieur (Coswig, Sachsen, Germany, 1640)

Ensuring Chart's success

Projektingenieure spielen in unserem Unternehmen bei der Umsetzung unserer Projekte eine entscheidende Rolle. Sie analysieren technische Anforderungen und entwickeln Lösungen, damit wir unsere Projektziele erreichen.

Willkommen bei Chart

Willkommen bei der Howden GmbH

In der Howden GmbH werden Hochleistungsventilatoren und -gebläse sowie regenerative Wärmetauscher und Filteranlagen konstruiert, produziert, vertrieben und im Service betreut. Unsere Produkte werden auf der ganzen Welt für ihre Qualität und Innovation geschätzt. Darauf sind wir sehr stolz und uns ist dabei stets bewusst, dass es die Menschen sind, die unseren Erfolg ausmachen.

Zur Verstärkung unseres Teams suchen wir für unseren Standort Coswig zum nächstmöglichen Termin einen

Projektingenieur (m/w/d)

Ihre Aufgaben

Ansprechpartner für unsere Kunden in allen projektrelevanten Angelegenheiten
Kommunikationssteuerung zwischen den internen projektbeteiligten Abteilungen einschl. der Leitung von Kick-Off-Meetings
Selbständige Planung, Organisation und Begleitung unserer Projekte einschl. der Erstellung von Planungsunterlagen, komplexen Einkaufsspezifikationen und Fertigungsunterlagen
Selbständiges Erstellen von Fortschrittsberichten sowie Ableiten von Maßnahmen bei Planabweichungen
Selbständiges effizientes und strukturiertes Reporting an das Management
Projektdokumentation

Ihre Qualifikation

Abgeschlossene Weiterbildung zum Techniker Fachrichtung Maschinenbau oder Studium zum Maschinenbau-Ingenieur
Abgeschlossene technische Berufsausbildung vorteilhaft
Gute Kenntnisse für betriebswirtschaftliche Zusammenhänge in Fertigungsunternehmen
Erste Erfahrung im Projektmanagement im Anlagenbau wünschenswert
Verhandlungssichere Deutsch- und Englischkenntnisse, Kenntnisse einer weiteren Fremdsprache wünschenswert
Sichere Anwendung aller gängigen MS Office Programme sowie MS Project
Bereitschaft zu internationalen Dienstreisen
Offene, positive Persönlichkeit mit Kommunikations- und Organisationsstärke
Hohe Kundenorientierung, Selbstständigkeit und Flexibilität runden ihr Profil ab

Wir haben einige Kriterien zusammengestellt, die wir für diese Rolle als wichtig erachten. Sollten Ihre Erfahrungen und Kenntnisse nicht genau übereinstimmen, Sie aber überzeugt sind, dass Sie die Position erfolgreich ausüben können, freuen wir uns auf Ihre Bewerbung und sind gespannt, mehr über Sie zu erfahren.

Unser Angebot

Ein unbefristetes Beschäftigungsverhältnis in einem familiären Arbeitsumfeld
Eine abwechslungsreiche, eigenverantwortliche und herausfordernde Tätigkeit in einem interkulturellen Umfeld
Eine umfassende Einarbeitung sowie kontinuierliche Weiterbildung
Ein attraktives Vergütungspaket mit Weihnachts- und Urlaubsgeld
Flexible Arbeitszeiten bei einer 38-Std-Woche und 30 Urlaubstagen / Jahr
Die Möglichkeit zum hybriden Arbeiten
Arbeitgeberzuschuss zur Betrieblichen Altersversorgung
JobRad, Tankkarte, Mitarbeiterrabatte

Chart setzt sich aktiv für Chanchengleichheit ein

Die Absicht des Unternehmens in Bezug auf die Einstellung, Auswahl und Beförderung ist es, die geeignetste Person für jede Stelle auszuwählen. Dies unabhängig von der Herkunft, den religiösen Überzeugungen, dem Geschlecht, der sexuellen Orientierung, dem Familienstand, dem Alter oder der Behinderung dieser Person. Wir unterstützen zudem die Bundesinitiative „Job – Jobs ohne Barrieren“.

Dieser Kontakt ist gerne für Sie da

Bei Fragen steht Ihnen Björn Kulisch unter 02761 7029631 gerne zur Verfügung.

Projektingenieur (Coswig, Sachsen, Deutschland, 1640)

Ensuring Chart's success

Willkommen bei Chart Industries

Willkommen bei der Howden GmbH

Zur Verstärkung unseres Teams suchen wir für unseren Standort Coswig zum nächstmöglichen Termin einen

Projektingenieur (m/w/d)

Ihr neues Aufgabenfeld

Ansprechpartner für unsere Kunden in allen projektrelevanten Angelegenheiten
Kommunikationssteuerung zwischen den internen projektbeteiligten Abteilungen einschl. der Leitung von Kick-Off-Meetings
Selbständige Planung, Organisation und Begleitung unserer Projekte einschl. der Erstellung von Planungsunterlagen, komplexen Einkaufsspezifikationen und Fertigungsunterlagen
Selbständiges Erstellen von Fortschrittsberichten sowie Ableiten von Maßnahmen bei Planabweichungen
Selbständiges effizientes und strukturiertes Reporting an das Management
Projektdokumentation

Ihre Qualifikation

Abgeschlossene Weiterbildung zum Techniker Fachrichtung Maschinenbau oder Studium zum Maschinenbau-Ingenieur
Abgeschlossene technische Berufsausbildung vorteilhaft
Gute Kenntnisse für betriebswirtschaftliche Zusammenhänge in Fertigungsunternehmen
Erste Erfahrung im Projektmanagement im Anlagenbau wünschenswert
Verhandlungssichere Deutsch- und Englischkenntnisse, Kenntnisse einer weiteren Fremdsprache wünschenswert
Sichere Anwendung aller gängigen MS Office Programme sowie MS Project
Bereitschaft zu internationalen Dienstreisen
Offene, positive Persönlichkeit mit Kommunikations- und Organisationsstärke
Hohe Kundenorientierung, Selbstständigkeit und Flexibilität runden ihr Profil ab

Unser Angebot an Sie

Ein unbefristetes Beschäftigungsverhältnis in einem familiären Arbeitsumfeld
Eine abwechslungsreiche, eigenverantwortliche und herausfordernde Tätigkeit in einem interkulturellen Umfeld
Eine umfassende Einarbeitung sowie kontinuierliche Weiterbildung
Ein attraktives Vergütungspaket mit Weihnachts- und Urlaubsgeld
Flexible Arbeitszeiten bei einer 38-Std-Woche und 30 Urlaubstagen / Jahr
Die Möglichkeit zum hybriden Arbeiten
Arbeitgeberzuschuss zur Betrieblichen Altersversorgung
JobRad, Tankkarte, Mitarbeiterrabatte

Chart setzt sich aktiv für Chanchengleichheit ein

Die Absicht des Unternehmens in Bezug auf die Einstellung, Auswahl und Beförderung ist es, die geeignetste Person für jede Stelle auszuwählen. Dies unabhängig von der Herkunft, den religiösen Überzeugungen, dem Geschlecht, der sexuellen Orientierung, dem Familienstand, dem Alter oder der Behinderung dieser Person. Wir unterstützen zudem die Bundesinitiative „Job – Jobs ohne Barrieren“.

Dieser Kontakt ist gerne für Sie da

Bei Fragen steht Ihnen Björn Kulisch unter 02761 7029631 gerne zur Verfügung.

Continuous Improvement Lead (La Crosse, WI, United States, 54601)

Ensuring Chart’s Success…

The Continuous Improvement Manager will be located at the LaCrosse, WI Chart Industries Facility.

Lead the development, management, and implementation of the improvement strategy for Brazed Aluminum Heat Exchanger product line, focusing on the improvement of Business excellence, on time delivery, quality of service to customer expectations, and margin performance.
Provide CI expertise and coaching required to direct and facilitate the business unit to achieve its budget goals and long-term growth objectives via progression toward world-class business performance.
Support the development of team performance by providing an energized and engaged approach to improvement activity with effective communication and change management.
Work with leadership in defining and developing improvement plans for critical business processes.
Collect and conduct data analysis of current state performance working with leadership teams to understand key improvement opportunities.
Train, deliver, and transfer knowledge of the CI methods and thinking. Develop roadmaps and KPI tracking for business value streams.

What Will You Do?

Drive the implementation of robust CI standards and Daily Management processes across the site and embed a culture of problem solving.
Lead improvement events (Kaizen, Value Stream Mapping, 5&6S) including scoping, event planning, facilitation, and action planning.
Drive improvement actions and embed role within processes to ensure stable and sustainable processes.
Develop a CI engagement strategy and create an action plan to achieve the CI vision.
Drive a standardized and common approach to continuous process improvement in alignment with other Cryo sites.
Provide leadership in the implementation of Policy Deployment initiatives.
Support Operations in identifying and realizing improvement opportunities where appropriate.
Proactively drive use of "best CI practice," learning from external businesses and perspectives.

Your Education should be...

4-year degree in an Engineering, Management, or related field. Other degrees will be considered based on experience.
Lean Six Sigma Black belt or equivalent.

**Sponsorship is not offered for this role.

Your Professional Experience Should Be...

Essential Skills:

Over 5 years of structured problem-solving and CI event planning (E.g., Kaizen, value stream mapping).
Experience in lean business transformation across various industries and functions.
Strong program management and training delivery skills.
Coaching individuals through change and process improvements.
Recognized Lean/6 Sigma training, strategic thinking capability, and effective communication abilities at all organizational levels.
Accountability, approachability, and assertiveness.

Desired Skills:
Fast learner with the ability to multitask and prioritize.
Positive, inspirational energy with influencing skills.
Courage to challenge the status quo while being hands-on.
Analytical mindset balanced with attention to detail and respect for all levels of personnel.
Sensitivity to cultural nuances and an ability to build rapport and engagement.
Urgency and commitment to results, fostering a performance-oriented culture.
Collaborative coaching style to develop team talent and provide constructive feedback.

Your Physical Work Environment Will Require…

Occasional business travel. Some tasks and responsibilities require working in a non-climate-controlled manufacturing plant. Will be subject to working in conditions typical to a manufacturing plant, including but not limited to: loud noise, dust and chemicals. When in the plant, Personal Protective Equipment must be worn. Including but not limited to: safety headwear, footwear, eye, hearing, and hand protection. Must be able to lift up to 50 lbs, stand for long periods of time, walk for long periods of time, bend and stoop repetitively, and handle repetitious activity for long periods of time. Must be able to withstand working in both an office and manufacturing plant environment. Must be able to sit and work on a computer for long periods of time.

Our Benefits Package...

Our Benefits | Chart Industries

Monteur Equilibreur (Meyzieu , N/A, France, 69330)

Howden Solyvent Ventec (230 pers. 45M€ CA) est une des filiales industrielles du groupe mondial Chart Industries, fabricant mondial de premier plan d’équipements et de solutions hautement techniques pour les marchés de l’énergie, de l’industrie et des gaz industriels (11200 pers, 40 pays).

Dans le cadre d'un renforcement de nos équipes, nous recrutons un(e) Monteur équilibreur H/F pour notre site de Meyzieu.

Le candidat idéal sera responsable de :

Assembler et équilibrer des pièces mécaniques selon les plans et les spécifications techniques.
Utiliser des outils et des équipements de mesure pour vérifier l’équilibrage des pièces.
Effectuer des ajustements et des corrections nécessaires pour garantir la conformité des pièces aux normes de qualité.
Collaborer avec les autres membres de l’équipe pour optimiser les processus de montage et d’équilibrage.
Assurer la maintenance de premier niveau des équipements de montage et d’équilibrage.
Respecter les consignes de sécurité et les procédures de travail en vigueur.
Réaliser des assemblages plus complexes (ligne d'arbre, lignages accouplements et poulie, câblage).

Profil recherché :

CAP/BEP en mécanique ou équivalent.
Expérience en montage et équilibrage de pièces mécaniques.
Connaissance des techniques d’équilibrage et des outils de mesure.
Capacité à lire et interpréter des plans techniques.
Rigueur, précision et sens du détail.
Aptitude à travailler en équipe et à communiquer efficacement.

Nous offrons :

Un environnement de travail dynamique et stimulant.
Des opportunités de formation et de développement professionnel.
Un package salarial attractif et des avantages sociaux compétitifs.

Si tu es passionné par la mécanique et que tu souhaites contribuer à notre succès, nous serions ravis de recevoir ta candidature !

Project Engineer (The Woodlands, TX, United States, 77381)

Ensuring Chart’s Success…

Chart Industries is looking for a Project Engineer for our office in The Woodlands, TX. We are open to a hybrid schedule for this role. Responsibilities include leading Project Engineering support for proposals and projects, assisting with the development of Process Flow Diagrams (PFDs), Piping and Instrumentation Diagrams (P&IDs), hydraulic analysis, equipment and line specifications, preparing and evaluating bid packages, and interacting with engineering, operation and fabrication disciplines. Provides support to Project Management and technical interface with Customers and vendors.

What Will You Do?

Performs high level research and analysis of data including customers design proposal, equipment, valves and process line specifications, drawings, customer and industry standards / codes and equipment manuals to determine feasibility of design and application of equipment.
Performs engineering calculations to size piping and valves and assists development of PFDs and P&IDs to ensure equipment and systems conform to Chart engineering design standards and customer specifications.
Works closely with the Process Engineering group in the coordination and development of P&IDs for Thermal-Fluid systems including Cryogenic subsystems from concept to completion with minimal technical supervision. This also requires working closely with other engineering disciplines, Project Management, customer representatives, suppliers and shop personnel to assure that all aspects of the design requirements are considered and included in the P&ID as required.
Provides technical support and operations assistance to the Project Manager.
Reviews Customer specifications, develops supplier inquiry specifications and requisitions for bid and purchase, and participates in supplier bid analysis and selection recommendations.
Maintains responsibility for technical coordination of projects.
Assists in developing overall project schedules and budgets and assures that engineering requirements are performed in accordance with schedule requirements.
Ensures engineering work for projects and proposals is completed accurately, within budget and on schedule.
Coordinates with CAD group to assist the development of plant layout, general arrangement and assembly drawings as required for the project.
Works with the shop and Project Management to meet customer and engineering requirements for fabrication, assembly and shipping.
Provides regular updates of design status, drawings, BOM’s and purchased equipment.
Works with and supports shop personnel during fabrication and provides support for field personnel during on site field check out and commissioning of equipment.
Records detailed notes and actions from team, Customer and vendor meetings.

Your Experience Should Be...

BS in Mechanical or Chemical Engineering preferred.
3-10 years of related engineering and design experience preferably with natural gas and liquids production or the oil and gas industry
Project Engineering experience in related industry is essential.
Experience in Natural Gas Industry including the engineering, design, fabrication, commissioning of mechanical equipment used in petro-chemical or natural gas industries is desired.
LNG or other plant Commissioning experience preferred.
Excellent organizational, communication and teamwork capabilities.
Ability to speak publicly and address group audiences.
Knowledge of common engineering practices and Industrial codes including ANSI B31.3 piping code, ASME Section VIII pressure vessel code and other related codes and standards of ANSI,
ASME, ASTM, API, IEC, NACE, NEC and NFPA.
Excellent skills with Microsoft Office suite of products.
Knowledge of M-Files and bluebeam a plus.
Knowledge of Intergraph Smart Plant Enterprise tools particularly Smart Plant Foundation.
Ability to solve technical problems and communicate changes to the project team members.
Ability to work with minimal technical supervision and strictly adhere to project schedule and budget.
Ability and willingness to follow company procedures in all aspects of employment and performance of job functions.
Ability to technically coordinate projects from concept and development through approval, engineering, procurement, fabrication and completion.
Ability to work with field, operation and maintenance personnel at all levels.
Willing and able to travel occasionally as required to meet company and project requirements.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Servisní Technik (Prague, Prague, Česká republika, 25081)

Zajišťujeme úspěch společnosti Chart...

Do oddělení Servisu hledáme kolegu na pozici Servisní technik. Chceme doplnit náš servisní tým, kdy budete provádět opravy kompresorů, ventilátorů a dmychadel u našich zákazníků nejen v ČR a SR, ale i ve střední a východní Evropě. Naše produkty jsou potřebné pro chemický a petrochemický průmysl.

Jaká bude vaše každodenní činnost...

Montáže a opravy kompresorů
Servisní výjezdy na opravy kompresorů v ČR a v zahraničí
Provádění generálních oprav, oprav pístových, šroubových a odstředivých kompresorů na dílně servisu včetně tlakováni pod vedením zkušenějších kolegů
Spolupráce s kolegy v servisu a aktivní účast na řešení problémů.
Solupráce při řešení provozních potíží v servisu.

Vaše vzdělání by mělo být...

SOU nebo SPŠ
Znalost anglického jazyka výhodou (chuť se domluvit a dále se zlepšovat)
základní znalost práce na PC

Vaše fyzické pracovní prostředí bude vyžadovat...

Ochotu učit se novým postupům a cestovat
Zodpovědnost a schopnost se rozhodovat, odolnost proti zátěži
Týmová práce, manuální zručnost, důslednost, časová flexibilita

Vaše pracovní zkušenosti by měly...

Chart: : zaměstnavatel rovných příležitostí

Nabízíme:

• Zodpovědnost a samostatnost
• Flexibilní pracovní dobu (vše je na domluvě)
• Skvělý kolektiv lidí, ale především expertů v oboru
• Benefity jako např. 5 týdnů dovolené, možnost ubytovny, stravenkový paušál, příspěvek na dojíždění, jazykové kurzy, příspěvek na penzijní/životní připojištění/příspěvek na dlouhodobý investiční produkt, Multisport kartu atd.
• Příjemné pracovní prostředí ve zcela nové budově v parku P3 Prague D11 Nehvizdy
• Firemní svozy z metra Černý Most / vlakové stanice Mstětice

Servisní Technik (Prague, Prague, Czech Republic, 25081)

Ensuring Chart’s Success…

What Your Day-to-Day Activities Will Be…

Your Education Should Be…

Your Physical Work Environment Will Require…

Your Professional Experience Should Be…

Chart is an equal opportunity employer

Howden - Quality Nuclear Projects Officer (Meyzieu , N/A, France, 69330)

Howden Solyvent Ventec (230 pers. 45M€ CA) est une des filiales industrielles du groupe mondial Chart Industries, fabricant mondial de premier plan d’équipements et de solutions hautement techniques pour les marchés de l’énergie, de l’industrie et des gaz industriels (11200 pers, 40 pays).

Acteur majeur du secteur de l'aéraulique, HSV vend, conçoit, fabrique et teste des ventilateurs industriels. L’entreprise s’adresse au marché mondial des industries et propose la gamme de ventilateurs la plus large, du produit standard à la solution sur-mesure.

Nous recherchons pour renforcer notre service qualité, un responsable qualité nucléaire F/H, qui sera garant de la bonne application des exigences qualité réglementaires, normatives et client dans le domaine Nucléaire, vous vous assurerez que les processus nécessaires au bon fonctionnement de l’entreprise sont définis, en place, maîtrisés et utilisés au quotidien sur les projets, notamment nucléaires, en cours et améliorés continuellement.

Principales Missions / Activités : (Cette description n’est ni exhaustive, ni limitative et est susceptible d’évoluer dans le temps)

Qualité projet :

Analyser et déployer les cahiers des charges clients, normatifs et réglementaires dans le domaine du Nucléaire au sein de HSV et de ses fournisseurs.
Suivre l’évolution de la réglementation et des exigences.
Former et assister le personnel dans l’utilisation des méthodologies et procédures qualité Nucléaire.
Définir et mettre en place des outils efficaces pour un pilotage pertinent de l’activité Nucléaire et les suivre.
Fédérer l’entreprise autour de la démarche qualité Nucléaire.
Être l’interface entre les chefs de projet et l’exécution : production, fournisseur, qualité interne, etc., pour les projets nucléaires.
Suivre l’exécution des plans qualité pour les projets nucléaires auprès des opérateurs et des fournisseurs.
Constituer les dossiers constructeurs qualité en centralisant les documents qualité, de production, fournisseurs, etc.
Analyser les dysfonctionnements et proposer des améliorations pour réduire les coûts de production et les délais de livraison.
Centraliser et solder les actions préventives/correctives ainsi que les actions à la suite d’audits fournisseurs, clients, organismes de certification qualité.
Prendre en charge, gérer et solder les projets garantis dans le domaine du Nucléaire.

Audits Fournisseurs :

Réaliser et rédiger des audits qualité pour les fournisseurs du Nucléaire suivant le standard HSV.
Suivre l’implémentation des actions chez le fournisseur.

Communiquer la performance qualité de l’entreprise à l’ensemble du personnel via des outils de communication (lettre qualité ou autres).
Être le référent Nucléaire au sein du service Qualité.

Cursus académique requis / Expérience(s) professionnelle(s) requise(s) :

Bac +3 dans le domaine gestion de projet avec une sensibilité qualité.
Expérience minimum de 3 ans dans la qualité Nucléaire ou dans un domaine rigoureux.

Si vous êtes passionné par la qualité et souhaitez contribuer à des projets nucléaires de grande envergure, rejoignez-nous !

Mechanic Prefab & Welding (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for a Mechanic Prefab & Welding, who will join our Engineering team and will support in making a valuable difference in the century to come.

The Mechanic Prefab & Fitting is an operational mechanic who can perform prefabrication activities to prepare piping for the welding department in our manufacturing plant in Rheden, NL.

What Will You Do?

Fit, mount and connect piping on skids, compressors and several other components of the largest API 618 compressors in the worldandcompressors used in the upcoming hydrogen market.
Discuss progress and planning with Shop Supervisor
Receive technical support and instructions from Planning Operations
Create and maintain a safe working environment, every day a step better
Deliver quality in our product
Finish jobs in a timely manner

What do you need to bring?

Education Requirements

Technical school diploma, specialized in fitting piping and welding area (LTS, MTS) ideally

Experience Requirements

Experience in the fitting, prefab and welding area, preferably at least 3-5 years working experience

Language Capabilities

Ability to communicate in Dutch
Able to understand English, speaking is preferred

What will you get in return?

About us

Career Opportunities (Renfrew, Scotland, United Kingdom, PA4 8XJ)

Career Opportunities

Ready to take the next step in your engineering or manufacturing career?

Should you be interested in joining a global engineering business, but don't see a vacancy that suits you currently, then click apply to register your interest in working for us.

We have teams across our factory, finance, engineering, procurement, sales, operations, aftermarket, legal and field service.

Who we are

Howden is a leading global engineering business who focus on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognise the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference.

Our Benefits

Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Area Sales Manager (Olpe, Nordrhein-Westfalen, Germany, 57462)

Ensuring Chart’s Success…

Als Area Sales Manager erschließen Sie Wachstumspotentiale und sind aktiv an der Umsatzsteigerung in den Regionen Süddeutschland, Österreich und Schweiz verantwortlich. Diese Rolle konzentriert sich auf den Ausbau unseres Aftermarket-Geschäfts, die Identifizierung strategischer Marktchancen und den Aufbau einer robusten Vertriebspipeline.
Dabei konzentrieren Sie sich nicht nur auf die schnelle und pragmatische Problemlösung für unsere Kunden, sondern investieren in den Aufbau langfristiger Beziehungen.

Über uns...

Chart Industries ist ein weltweit führender Hersteller von hochentwickelter Ausrüstung für vielfältige Anwendungen in den Märkten für saubere Energie und Industriegase. Im Jahr 2023 erwarb Chart Industries die Howden Group und die gesamte Gruppe ist mittlerweile mit über 11.700 Mitarbeitern in über 40 Ländern weltweit vertreten. Unsere Vision ist es, die lebenswichtigen Prozesse unserer Kunden zu ermöglichen und dadurch eine nachhaltigere Welt zu fördern. Erfahren Sie mehr über uns unter https://www.chartindustries.com

CPI, Teil der Howden-Gruppe, ist ein internationales Produktions- und Dienstleistungsunternehmen, das sich auf die Bereitstellung der besten Produkte und Dienstleistungen für die Kompressionsindustrie konzentriert. Mit einer Geschichte von mehr als 120 Jahren kombinierter Geschäftserfahrung hat sich CPI traditionell darauf konzentriert, ein Lösungsanbieter für schwierige Anwendungen in der Kolbenkompressionsindustrie zu sein, bei dem die hochwertigsten, von CPI entwickelten proprietären Materialien verwendet werden. Heute ist CPI ein Lösungsanbieter, der sein Angebot über die Kompressionsbranche hinaus auf andere wichtige Wachstumsbereiche ausweitet.

Zur Verstärkung unseres Teams suchen wir einen Area Sales Manager (m/w/d) After Sales / Service

Wohnort idealerweise in der Region Bamberg, Nürnberg, Erlangen, Würzburg oder Bad Kissingen

Ihre Aufgaben…

•   Förderung und Sicherung von Geschäftsmöglichkeiten mit neuen und bestehenden Kunden.
•   Analyse von Markttrends zur Identifizierung neuer Geschäftsmöglichkeiten und Potenziale.
•   Erstellung detaillierter Berichte zu Aufträgen, Angeboten und Markteinblicken zur Unterstützung der strategischen Planung.
•   Führung und Unterstützung des internen Vertriebsteams mit dem Ziel, dessen Effektivität zu steigern.
•   Pflege präziser Vertriebs-KPI-Daten (z. B. Buchungen, Margen, Umsatz) zur Unterstützung der Leistungskontrolle.

Ihr Profil…

•   Ausbildung: Bachelor-Abschluss in Betriebswirtschaft, Wirtschaftsingenieurwesen o.ä. – alternativ Abschluss in einem technischen Bereich plus kaufmännische Kenntnisse.
•   Erfahrung: Mehrjährige Erfahrung in einer technischen Vertriebsfunktion mit Schwerpunkt Service/Aftersales bevorzugt; wenn Sie erste Erfahrungen im technischen Vertrieb gesammelt haben und in dieses Geschäft einsteigen möchten, zögern Sie nicht, sich zu bewerben. Wir konzentrieren uns auf Persönlichkeit und Potenzial, nicht auf Ihren Lebenslauf.
•   Produktkenntnisse: Grundlegende technische Kenntnisse über unsere Produkte und deren Anwendungen sind von Vorteil, aber nicht zwingend erforderlich.
•   Branchenkenntnisse: Von Vorteil, aber wir sind auch offen für andere Branchen wie chemische Dienstleistungen, industrielle Wartung, etc.
• Weitere Kenntnisse: Mechanisches Verständnis für rotierende Maschinen und Schwer-/Sondermaschinenbau sowie Thermodynamik ist von Vorteil.
•   Sprache: Verhandlungssichere Deutsch- und Englischkenntnisse; Holländisch vorteilhaft.
•   Reisebereitschaft: ca. 40%.

Wir haben einige Kriterien zusammengestellt, die unserer Meinung nach für diese Stelle wichtig sind. Machen Sie sich jedoch keine Sorgen, wenn Ihre Erfahrung und Ihr Fachwissen nicht genau übereinstimmen. Wenn Sie das Gefühl haben, dass Sie die Rolle erfolgreich ausfüllen können, würden wir uns über Ihre Bewerbung freuen und gerne mehr über Sie erfahren.

Unser Angebot…

Ein unbefristetes Beschäftigungsverhältnis
Eine abwechslungsreiche, eigenverantwortliche und herausfordernde Tätigkeit im interkulturellen Umfeld
Eine umfassende Einarbeitung sowie kontinuierliche Weiterbildung
Ein sehr gutes Vergütungspaket
Flexible Arbeitszeiten bei 38 Stunden/Woche und 30 Tagen Urlaub/Jahr
Arbeitgeberzuschuss zur Betrieblichen Altersversorgung

Chart setzt sich aktiv für Chancengleichheit ein…

Project Manager (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture:

Howden Thomassen Compressors is a specialist supplier of tailor-made gas compression equipment to various industries. Our products have made a valuable difference for our clients for the past 100 years, and we are now looking for a Project Manager who will join our team and who will support in making a valuable difference in the century to come. As a Project Manager you are a core team member in our value stream that delivers new build compressor installations worldwide. You are the contact person for our customers and the team at Howden Thomassen Compressors, from placing the order to the delivery and commissioning.

This is a unique opportunity to work with a highly motivated team to capture the growth opportunities in the renewable hydrogen market!

What needs to be done?

Managing the entire project lifecycle, ensuring adherence to contractual specifications, maintaining high-quality standards, managing budgets effectively, and keeping projects on schedule. Preparation of the Project Start Up, initiate and execute the tasks related to this phase including the handover of the technical and commercials aspects of the project, organizing and leading the project kick-off with the customer;
Performing all project management activities including but not limited to risk management, coordination of all project execution related activities, monitoring of suppliers, monitoring and reporting of progress, quality, costs, contract, legal aspects, etc.
Leading the multidisciplinary project team;
Based on customer requirements, interpret and determine the technical scope and technical implementation;
Ensure that required technical documentation such as datasheets, drawings, diagrams, vendor specifications are provided by the engineering team;
Organize the project meetings and reviews, with clients and project team members and ensure documentation of the results and follow-up of the actions.

What do you need to bring?

Technical knowledge and technical interest in a broad range of disciplines (rotating, mechanical, systems and processes);
Commercial understanding and creativity to find the best technical-commercial solution (thinking out of the box);
A minimum of 5 years’ experience in a Project Management position;
Strong Project Management skills;
A continuous improvement mind-set;
Excellent interpersonal skills including an open and engaging communication style;
Team player, ownership and a self-starter mentality;
Excellent in setting priorities and strong time management skills;
Excellent English language skills.

What will you get in return?

You will get the chance to develop and realize new improvements, meet customers, have technical and commercial discussions and celebrate achieving milestones of a project in a team with a good atmosphere and dedicated colleagues. We offer an interesting and challenging position within a professional, international organization with freedom to act and the opportunity to work with a variety of stakeholders. As we consider talent management as key to the success of our organization, we offer opportunities for personal and professional development. We offer a salary package that is fully in line with the level of the position combined with an extensive package of fringe benefits.

Projektingenieur (Olpe, Nordrhein-Westfalen, Germany, 57462)

Willkommen bei Chart

Willkommen bei der Howden GmbH

Projektingenieur für regenerative Wärmetauscher (m | w | d)

Ihr neues Aufgabenfeld

fundiert und adäquat

Selbstständige Erarbeitung, Prüfung und Freigabe von Planungsunterlagen, komplexen Einkaufsspezifikationen und Fertigungsunterlagen
Ansprechpartner des Lieferanten sowie des Proposal-Teams bei technischen Fragestellungen
Erstellung von Fertigungszeichnungen
Zusammenarbeit mit der kfm. Projektabwicklung bzgl. Lieferterminen und Cash Milestones

Dieses Know-how und Potential sollten Sie mitbringen

abgeschlossene Ausbildung zum Produktdesigner o.ä. mit Weiterbildung zum Maschinenbauingenieur oder -techniker
Konstruktionserfahrung im Apparatebau vorteilhaft
verhandlungssichere Deutsch- und Englischkenntnisse
Erfahrung in Autodesk Inventor und AutoCAD wünschenswert
durchsetzungsstarke und aufgeschlossene Persönlichkeit
Kommunikationsstärke und Teamgeist

Dieses Angebot erwartet Sie

Ein unbefristetes Beschäftigungsverhältnis
Eine abwechslungsreiche, eigenverantwortliche und herausfordernde Tätigkeit
Eine umfassende Einarbeitung sowie kontinuierliche Weiterbildung
Ein attraktives Vergütungspaket
Flexible Arbeitszeiten bei 38 Stunden/Woche und 30 Tagen Urlaub/Jahr
Möglichkeit zum hybriden Arbeiten
Arbeitgeberzuschuss zur Betrieblichen Altersversorgung

Dieser Kontakt ist für Sie da

Haben wir Ihr Interesse an dieser abwechslungsreichen und herausfordernden Tätigkeit in unserem Unternehmen geweckt?

Dann freuen wir uns über Ihre Bewerbung unter Angabe des frühestmöglichen Eintrittstermin und Ihres Gehaltswunsches. Bitte bewerben Sie sich direkt auf unserem Bewerbungsportal:

https://www.chartindustries.com/careers/career-opportunities

Bei Fragen steht Ihnen Frau Heike Lohmann unter +49 6233852591 gern zur Verfügung.

Das ist uns wichtig

Chart legt Wert auf Chancengleichheit.

Wir freuen uns über Bewerbungen von Menschen mit Behinderung und unterstützen zudem die Bundesinitiative "Job - Jobs ohne Barrieren".

Projektingenieur (Olpe, Nordrhein-Westfalen, Deutschland, 57462)

Willkommen bei Chart/ FLOW/ VCT/ GOFA

Was Du von FLOW/ VCT/ GOFA erwarten kannst

Dein Know-How & Potential sind gefragt

Diese Tätigkeiten sollten Dich reizen

Unser Angebot an Sie

st für Dich & Deine Fragen da

Brauchen Sie eine Unterkunft...

Project Manager Revamp (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture:

Howden Thomassen Compressors, is a specialist supplier of tailor-made gas compression equipment to various industries. Our products have made a valuable difference for our clients for the past 100 years, and we are now looking for a Project Manager Revamp who will join our team and assist us in making a valuable difference in the century to come. As a Project Manager you are a core team member in our Aftermarket value stream that delivers spare parts, services, repairs and retrofit solutions. You are the contact person for our customers and the team at Howden Thomassen Compressors, from placing the order to the delivery and commissioning.

What needs to be done?

Project management of the technical and commercial aspects and monitoring of the technical implementation in line with the contractual specifications, quality, budget and schedule;
Preparation of the Project Start Up, initiate and execute the tasks related to this phase including the handover of the technical and commercials aspects of the project, organizing and leading the project kick-off with the customer;
Performing all project management activities including but not limited to risk management, coordination of all project execution related activities, monitoring of suppliers, monitoring and reporting of progress, quality, costs, contract, legal aspects, etc.
Leading the multidisciplinary project team;
Based on customer requirements, interpret and determine the technical scope and technical implementation;
Ensure that required technical documentation such as datasheets, drawings, diagrams, vendor specifications are provided by the engineering team;
Ensure technical standards are used and implemented (API, ATEX, IEC, ASME VIII);
Organize the project meetings and reviews, with clients and project team members and ensure documentation of the results and follow-up of the actions.

What do you need to bring?

Relevant technical education (Bachelor degree Mechanical Engineering or similar);
Experience in capital project execution;
Technical knowledge and technical interest in a broad range of disciplines (rotating, mechanical, systems and processes);
Commercial understanding and creativity to find the best technical-commercial solution (thinking out of the box);
Project Management skills;
A continuous improvement mind-set;
Excellent interpersonal skills including an open and engaging communication style;
Team player, ownership and a self-starter mentality;
Pro-activity and a hands-on attitude;
A strong customer mindset;
Excellent in setting priorities and strong time management skills;
Excellent English language skills;
Willingness to travel occasionally.

What will you get in return?

About us:

Welder (Palmerton, PA, United States, 18071)

Ensuring Chart’s Success…

Hiring at Fronti Fabrications in Palmerton, PA - a Chart Industries company!

Wages for welders starting at up to $32.00 per hour.

Operating Hours – Monday through Thursday – 6:00-4:30. Must be available to work OT beyond normal operating hours as needed.

What Will You Do?

Must train and pass a minimum of 6G level GTAW
GTAW B-31.3 on Aluminum pipe a plus, but not required
Must weld to x-ray quality at all times and when required, pass x-ray and dye penetrant check of welds
FCAW to ASME standards
May weld with other processes and varied weldments and metals as warranted
Works from drawings and specifications
Must identify material and markings to ensure proper piece parts and identification codes are present
Identify and use proper Work Instructions and other related specifications
Must perform fit-checks prior to final assembly with potential to rework fitments to meet drawing specifications
Responsible for quality of weld joint and proper identification of the weld
Setup and operation for ideal welding conditions
Perform minor maintenance on all welding machines such as change torch, foot pedal, fuses, load and adjust MIG wire feeder, and check coolant reservoirs daily.
Set up and operate portable plasma cutter
Preheat preparation prior to welding per instructions
Must keep work area clean and maintain shop housekeeping
May need to perform a job from start to finish including cut/prep /Fitting/ Welding
Unloading and loading of fabricated equipment or inhouse materials

Your Physical Work Environment Will Require…

Works in an average factory environment. Exposed to the following conditions: heat, sharp edges, sometimes above-average noise, burns, fumes, smoke, dust. Protective equipment and clothing provided. Works in awkward positions: bending, reaching, pulling, pushing, standing, and sitting. Lifting 0 to 50 lbs. When lifting over 50 lbs, two people are required.

Your Experience Should Be...

Must have a certificate/degree in welding from a certified technical college or 12 months of professional welding experience.

The candidate must have sufficient knowledge and ability to:

Use and interpret sub-assembly drawings.
Must have good dexterity and hand-eye coordination.
Understand and work with welding codes, techniques, and special instructions.
Use measuring devices and have basic knowledge of math.
Work with both MIG and TIG weld processes on SS/ Aluminum and other metals when necessary.
Work closely with support groups such as Engineering and Supervisors.
Responsible for quality workmanship and requirements to reduce or eliminate hold points.

The candidate must have sufficient ability to operate:

Welding Machines (MIG & TIG)
Portable Plasma Cutter
Positioner
Oxygen Acetylene Torch
Small Hand Tools
Cleaning Tanks
Various Hand Tools
Wire Brush, Chisel, & Punches
Hand and Electric Trucks
Overhead Cranes
Various Jigs and Fixtures
Bench Grinder
Simple and Complicated Measuring Devices

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Elektroinženýr (Decin, Ústí nad Labem, Czech Republic, 405 30)

Pro koho budeš pracovat?

Hledáš práci, kde budeš dělat na věcech, které mají reálný dopad – třeba na motorech pro Airbus, technologiích pro vodíkové stanice nebo LNG zásobnících pro celý svět? U nás v Chart Ferox to není sci-fi. Jsme součástí globální skupiny, která je světovým lídrem ve vývoji a výrobě zařízení pro skladování a distribuci zkapalněných plynů – ať už jde o LNG, kyslík nebo vodík.

Do týmu elektroinženýrů v Děčíně právě teď hledáme dalšího parťáka – možná právě tebe. Spolupracujeme na mezinárodních projektech a dáváme prostor těm, kdo chtějí růst, učit se a zároveň přinášet vlastní řešení. Nečekáme, že všechno budeš umět hned. O to víc si ale ceníme lidí, kteří mají chuť se rozvíjet a být součástí dobré party.

Co tě u nás čeká?

Budeš se starat o průběh návrhu, výroby a prvního spuštění elektrických a elektronických částí našich výrobků. Od zapracování požadavků zákazníka a tvorby dokumentů pro výběru dodavatele, přes kontrolu dokumentace, zkušební testování až po instalaci, finální zapojení, oživení a odladění celých výrobků. Nebudeš na to sám – na každém projektu děláme jako tým. Inženýři, programátoři, projektoví manažeři, výrobáci i testovací specialisté táhnou za jeden provaz. Po zaškolení si vyzkoušíš práci se zkušenými kolegy v praxi a následně dostaneš i své vlastní projekty. Jakmile budeš mít za sebou pár projektů, dostaneš šanci vycestovat – podívat se, jak to celé funguje v praxi a být u zprovoznění stanice. Samozřejmě nejprve s kolegy, kteří ti nejen rádi pomůžou, ale od kterých se můžeš učit. Tví kolegové ti budou vždy nápomocni na telefonu. Budeš pracovat s technologiemi, které nejsou běžné, ale jsou o to zajímavější.

Koho hledáme?

Nečekáme, že budeš hotový expert na všechno. Hledáme někoho, kdo chce být součástí týmu, který táhne za jeden provaz. Někoho, kdo má chuť růst a nebojí se říct si o pomoc, když se chce něco naučit.

Máš vzdělání v elektrotechnice (klidně čerstvý absolvent) – důležitější, než tituly je, že se nebojíš učit nové věci.
Orientuješ se ve čtení schémat a dokumentace.
Máš osvědčení podle vyhlášky 50/1978 nebo podle nové legislativy NV 194/2022.
Angličtinu ovládáš aspoň na úrovni „rozumím a domluvím se“ – čekají tě meetingy nebo e-maily se zahraničím. Navíc ji využiješ při výjezdech do zahraničí.
Umíš pracovat s počítačem – hlavně Excel, Word, Teams, zbytek se naučíš u nás.
Máš ŘP sk. B – někdy je potřeba vyrazit na instalaci nebo testování mimo Děčín.
A hlavně – máš chuť řešit technické výzvy, chceš se něco naučit a být platným členem týmu.
Výhodou bude, pokud jsi manuálně zručný.

Co ti za to nabízíme?

Práci na mezinárodních projektech, které mají budoucnost
Možnost se učit od špiček v oboru – nejen u nás, ale i v zahraničí
Podporu v začátcích – dostaneš prostor pro zaškolení a kolegu, který tě bude mít v začátcích na starosti
Zahraniční výjezdy (hlavně EU) – získáš zkušenosti, sebevědomí a zdokonalíš se v angličtině
Férového šéfa a přátelský tým
Po zaškolení pružnou pracovní dobu s možností Home office až 2 dny v týdnu
Balíček benefitů – penzijko, životko nebo DIP, Multisportka, Cafeterie, dotované stravování
Stabilitu firmy s více než 80letou tradicí

Zní to jako něco pro tebe?

Pošli nám CV nebo jen krátkou zprávu přes LinkedIn. Můžeme si nezávazně zavolat a pobavit se blíže.

Elektroinženýr (Decin, Ústí nad Labem, Česká republika, 405 30)

Pro koho budeš pracovat?

Co tě u nás čeká?

Koho hledáme?

Máš vzdělání v elektrotechnice (klidně čerstvý absolvent) – důležitější, než tituly je, že se nebojíš učit nové věci.
Orientuješ se ve čtení schémat a dokumentace.
Máš osvědčení podle vyhlášky 50/1978 nebo podle nové legislativy NV 194/2022.
Angličtinu ovládáš aspoň na úrovni „rozumím a domluvím se“ – čekají tě meetingy nebo e-maily se zahraničím. Navíc ji využiješ při výjezdech do zahraničí.
Umíš pracovat s počítačem – hlavně Excel, Word, Teams, zbytek se naučíš u nás.
Máš ŘP sk. B – někdy je potřeba vyrazit na instalaci nebo testování mimo Děčín.
A hlavně – máš chuť řešit technické výzvy, chceš se něco naučit a být platným členem týmu.
Výhodou bude, pokud jsi manuálně zručný.

Co ti za to nabízíme?

Práci na mezinárodních projektech, které mají budoucnost
Možnost se učit od špiček v oboru – nejen u nás, ale i v zahraničí
Podporu v začátcích – dostaneš prostor pro zaškolení a kolegu, který tě bude mít v začátcích na starosti
Zahraniční výjezdy (hlavně EU) – získáš zkušenosti, sebevědomí a zdokonalíš se v angličtině
Férového šéfa a přátelský tým
Po zaškolení pružnou pracovní dobu s možností Home office až 2 dny v týdnu
Balíček benefitů – penzijko, životko nebo DIP, Multisportka, Cafeterie, dotované stravování
Stabilitu firmy s více než 80letou tradicí

Zní to jako něco pro tebe?

Pošli nám CV nebo jen krátkou zprávu přes LinkedIn. Můžeme si nezávazně zavolat a pobavit se blíže.

Retrofit Solution Manager (Frankenthal, Rheinland-Pfalz, Deutschland, 67227)

Ensuring Chart’s Success

Über uns

Ihre Aufgaben

Konzeption, Angebotserstellung, Präsentation und Vertragsklärung zu Retrofit-Produkten und damit zusammenhängenden Leistungen für Turbomaschinen
Als zentraler Vertriebs-Ansprechpartner verantworten Sie die Schnittstelle zwischen Endkunden oder Regionalgesellschaften und internen Fachabteilungen
Verantwortung für die technische und kaufmännische Bearbeitung und Vertragsverhandlung von Projekten sowie die Übergabe dieser im Auftragsfall an das Projektmanagement
Verfolgung von Angeboten sowie Projekt-Forecast
Ableitung geeigneter Marketingmaßnahmen (Kampagnen) zur Erreichung der Absatz- und Ergebnisziele
Vertriebsseitige Begleitung der Einführung neuartiger Produkte und Lösungen (New Product Development)

Ihr Profil

Abgeschlossenes Studium der Fachrichtung Wirtschaftswissenschaften, Wirtschaftsingenieurwesen, Maschinenbau (oder vergleichbar), sowie langjährige Berufserfahrung im technischen Vertrieb, idealerweise im Turbomaschinenumfeld
Alternativ haben Sie eine erfolgreich abgeschlossene technische Berufsausbildung, langjährige fachspezifische Berufserfahrung und eine Weiterbildung zum/r Maschinenbautechniker/in
Kenntnisse im Bereich von Turbomaschinen-Verfahrenstechnik und -Regelung von Vorteil
Bereitschaft, sich in technisch komplexe Systeme einzuarbeiten
Gute Kenntnisse im Umgang mit SAP und CRM-Tools sind wünschenswert
Sie sind bereit zu weltweiten, regelmäßigen Reisetätigkeiten (~20-30%)
Verhandlungssichere Deutsch- und sehr gute Englischkenntnisse sind für Sie eine Selbstverständlichkeit

Unsere Rahmenbedingungen & Benefits

Chart setzt sich aktiv für Chancengleichheit ein

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Susanne Vong (susanne.vong@chartindustries.com) gern zur Verfügung.

Mechanic - Cryogenics (Barlborough, England, United Kingdom, S43 4XA)

The Role…

The Mechanic - Cryogenic is an exciting opportunity for someone coming from a Mechanic/ Vehicle repair background to take the next step in their career into the fascinating world of cryogenics. This role will ultimately be responsible for the maintenance, repair, refurbishing and servicing of cryogenic, vacuum isolated, tanks used for the storage and transport of cryogenic, liquefied gases such as liquid nitrogen, oxygen, and helium.

We will offer full and comprehensive training which includes visits to our other European sites to learn cryogenics and trucks/ trailer repairs and overhauls.

The role will involve ensuring the safe operation of cryogenic tanks, maintaining system integrity, and performing diagnostics and repairs on tanks and tank components. The range is from small repairs of individual components to full refurbishments of tanks. The ideal candidate will have deep experience with vacuum systems, tools and methods to test them, and create the vacuum, however we are also open to those coming from a vehicle mechanic background. Furthermore a strong understanding of safety protocols related to cryogenic gases would be very beneficial.

If you are interested in learning more about the cutting edge technology of Chart Industries cryogenic space then please click apply!

Who are we…

Due to growth of the Howden UK business & UK water market, in addition to incorporating our parent company Chart’s products into our UK service portfolio, we are opening a new facility based in Barlborough, near Sheffield.

Howden UK have been at the forefront of implementing service synergies, including working within the LNG industry, and being part of the drive to implement SDOX (a product from Chart Water). We have recently won business in the UK for cryogenic trailer repairs and overhauls so will be expanding the Howden UK organisation to establish ourselves in the market for service and repair of cryogenic trailers, ISO containers and packages gas units in the UK.

Within Chart Europe, we already have established businesses who manufacture, service and repair cryogenic trailers across our business locations in Czech, Germany, Italy and Sweden.

Barlborough will be the home of a larger Aftermarket Centre capable of executing the increased growth expected through 2025 and beyond. We are now recruiting a number of new roles to support the growth of cryogenic repairs and overhauls in the UK.

What will you do…

Cryogenic vacuum isolated tank testing, Maintenance & Repair:

Checking and servicing cryogenic gas storage tanks, their insulation, vacuum, transfer systems, cryogenic pumps, pipes, valves and safety valves.
Drying the tank, re- creating the vacuum test method
Perform full refurbishments on cryogenic tanks, especially checking and servicing cryogenic gas storage tanks, their insulation, vacuum, transfer systems, cryogenic pumps, pipes, valves and safety valves.
Inspect cryogenic tanks and piping for leaks, wear, and overall system integrity, ensuring compliance with safety and operational standards.
Replace or repair damaged or malfunctioning parts such as valves, gauges, pumps, regulators, and pressure relief devices.
Inspecting leaks on the tanks by using helium leak

Technical Troubleshooting:

Utilize diagnostic tools and equipment to assess and resolve technical problems

Preventive Maintenance:

Perform periodic inspections and preventive servicing.
Monitor the condition of cryogenic tanks to keep the isolation/ good cooling performance
Maintain maintenance logs and records, documenting repairs, inspections, and modifications made to cryo trailers.

What do you bring…

High school diploma or equivalent; vocational training in mechanics, mechatronics, cryogenics, or a related technical field is preferred.
Certification in cryogenics, or mechanical repair is an asset.
Minimum of 3 years of experience working with cryogenic tanks, trailers, or related equipment
Proven experience in the repair and maintenance of trailers, with a focus on those used for transporting liquefied cryogenic gases.
Strong knowledge of cryogenic storage and transfer systems, including the handling of liquefied gases and pressure components.
General knowledge of Trucks/ Trailer technology
Proficiency in diagnosing and repairing mechanical, pneumatic, hydraulic, and electrical systems in cryogenic trailers.
Familiarity with vacuum systems and cryogenic insulation techniques.
Ability to read and interpret technical manuals, schematics, and repair guides.
Experience working with DOT (Department of Transportation) regulations and standards for cryogenic or hazardous materials transport.
Welding and fabrication skills for trailers and pressure vessel repair and maintenance.(stainless steel)
Familiarity with safety protocols related to transporting hazardous materials.

Our benefits…

This is a permanent role based in our new facility in Barlborough, near Sheffield. Our benefits include:

Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunity employer...

Workshop Specialist (Chesterfield, England, United Kingdom, S42 5UY)

The Role…

The Workshop Specialist (Cryo Trailers) is responsible for the maintenance, repair, refurbishing and servicing of cryogenic trailers and transport systems used for the storage and transport of cryogenic, liquefied gases such as liquid nitrogen, oxygen, and helium. The role involves ensuring the safe operation of cryogenic trailers, maintaining system integrity, and performing diagnostics and repairs on cryogenic and trailer components. The range is from small repairs of individual components to full refurbishments of trailers. The ideal candidate will have experience with cryogenic systems, control systems, trailer maintenance, and a strong understanding of safety protocols related to cryogenic gases.

Who are we…

Within Chart Europe, we already have established businesses who manufacture, service and repair cryogenic trailers across our business locations in Czech, Germany, Italy and Sweden.

What will you do…

Cryogenic Trailer Maintenance & Repair:

Perform routine maintenance on cryogenic trailers, including checking and servicing cryogenic gas storage tanks, their insulation, vacuum, transfer systems, cryogenic pumps, pipes, valves and safety valves.
Perform full refurbishments on cryogenic trailers, including checking and servicing cryogenic gas storage tanks, their insulation, vacuum, transfer systems, cryogenic pumps, pipes, valves and safety valves.
Perform standard maintenance and repair on trailers, including welding, small repairs of any components, e.g. pipes, light systems, wheels, axles.
Inspect cryogenic tanks and piping for leaks, wear, and overall system integrity, ensuring compliance with safety and operational standards.
Ensure the proper alignment and functionality of mechanical and electrical components associated with cryo trailers.
Replace or repair damaged or malfunctioning parts such as valves, gauges, pumps, regulators, and pressure relief devices.
Replace pipes and valves, able to perform required welding to do this
Troubleshoot and resolve issues with cryogenic pump systems, including vaporizers and PBU units.
Test, calibrate, troubleshoot and repair control and monitoring systems, such as Flow measuring systems, Full automatic valve control systems, ensuring safety and compliance with transport regulations.

Technical Troubleshooting:

Perform detailed diagnostics and troubleshooting for mechanical, electrical, and cryogenic-related issues on trailers.
Utilize diagnostic tools and equipment to assess and resolve technical problems

Preventive Maintenance:

Perform periodic inspections and preventive servicing.
Monitor the condition of cryogenic equipment to prevent breakdowns during transport, reducing operational downtime and ensuring safety
Maintain maintenance logs and records, documenting repairs, inspections, and modifications made to cryo trailers.

What do you bring…

High school diploma or equivalent; vocational training in mechanics, mechatronics, cryogenics, or a related technical field is preferred.
Certification in cryogenics, welding, or mechanical repair is an asset.
Minimum of 3 years of experience working with cryogenic systems, trailers, or related equipment maintenance.
Proven experience in the repair and maintenance of trailers, with a focus on those used for transporting liquefied cryogenic gases.
Strong knowledge of cryogenic storage and transfer systems, including the handling of liquefied gases and pressure components.
General knowledge of Trucks/ Trailer technology.
Proficiency in diagnosing and repairing mechanical, pneumatic, hydraulic, and electrical systems in cryogenic trailers.
Familiarity with vacuum systems and cryogenic insulation techniques.
Ability to read and interpret technical manuals, schematics, and repair guides.

Our benefits…

This is a permanent role based at our new facility in Barlborough, near Sheffield. Our benefits include:

Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunity employer...

Production Lead - Fans (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Chart Industries in Beasley, TX is looking for experienced fitters for our Header manufacturing line. This position requires the ability to work overtime. Chart’s Production Lead plays a key role in the manufacturing process of producing Fiberglass Fan Blades.

What Will You Do?

• Supervise the activities of production personnel engaged in all facets of the manufacturing function
• Perform a variety of tasks assigned by Manager/Supervisor
• Collect and report basic production data
• Execute basic time changing transactions
• Ensure employees are meeting efficiency targets and provide guidance/corrective action where necessary to meet those targets

OBJECTIVES:

• Onboard new employees - prepare JSA, have equipment ready for start date
• Modify timecards by the end of shift.
• Provide direction to leads for Glass/Mold/Line priority.
• Upload balance blades to system by 8 AM daily. (Tidal Report) - Day shift team.
• Distribute locks to new employees and have lock user agreement signed.
• Start shift with 30-minute handoff from previous shift by coordinator/lead designated to share feedback.
• Manage Mold/Line lead and drive production from floor team - directly related to expectation per work cell.
• Hold regular review sessions with employees who are not meeting their expected level of quality/efficiency as defined by learning guide. Document accordingly.
• Drive productivity from mold stations & operators to meet shift goals.
• Support with inventory counts. (AM Shift)
• Distribute PPE as needed. Enforce the expectation as described in JSA.
• Manage start up/break times and confirm employees leave/return according to schedule.
• Assist with personnel assignments based on schedule/employee skillset.
• Provide support with knowledge of quality product from each station/troubleshoot with employee if necessary.
• Support business operations when schedule changes occur.
• Coordinate necessary mold repairs with maintenance team & leadership to mitigate down time/keep the production floor in working order.
• Drive the understanding of mold station goal to each operator and develop their skillset to maintain the rounds per shift.
• Clear QC cart & move product to appropriate area with 1 shift after defined path forward.
• Maintain level of 5S throughout shop & production area.
• Complete incident report/4 Blocker for any safety issues within 24 hours of issue.
• Confirm TPM forms are completed by floor team at beginning/end of shift. Escalate issues to leadership team for resolution.
• Report to scheduled shifts & set the example as a leader for the shop team
• Understand shop shutdown requirements - boiler/compressor/pumps
• Able to provide feedback to employees as applicable
• Responsible for coordinating employees per priority set by production schedule
• Promote a positive safety culture
• Set an example of leadership for the Chart/Hudson 5s program
• Document all employee records in a timely manner, Onboarding and employee expectations by workstation
• Direct and coach team members to achieve department objectives
• Approve labor hours in a timely manner
• Monitor all Preventative Maintenance program on all Fans Shop equipment and report to Maintenance, Manager, and Supervisor in a timely manner
• Responsible to maintain all JSA’s and sign-in records, ensure all employees are signing in to their correct JSA’s (Digital and physical)
• Responsible to lead and conduct Safety Meetings in a timely manner
• Support and lead the unloading of resin bulk deliveries as needed and perform resin gel tests

INTERACTION:

• Works with shop floor, maintenance technicians & managers

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

• Must be able to work inside & outside

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:
• Safety Glasses
• Steel Toe Shoes
• Hard Hat
• High Visibility Vest
• Ear Plugs
• Gloves (when needed)

PHYSICAL REQUIREMENTS:

• Walking
• Standing
• Using hands
• Bending
• Lifting

Your Experience Should Be...

• Knowledge of a variety of the field’s concepts, practices, and procedures
• Ability to rely on extensive experience and judgment to plan and accomplish goals
• Ability to report daily employee efficiency and provide feedback to employees
• Must be able to work rotating shifts

Minimum Education:
High School Diploma or Equivalent

Minimum Experience:
5 years

Skills Required (i.e. certifications, licenses, registrations, etc.):
Basic knowledge of the Fans Department or equivalent work setting, leadership experience, entry level of computer proficiency, verbal and written communication skills, highly dependable, self-directed, attention to detail, organizational skills. Not required but preferred, basic knowledge of resin and fiberglass applications.
Preferred Training Courses: CPR, First Aid, Fire Safety, Forklift Operators License, Microsoft Office

Field Project Engineer (The Woodlands, TX, United States, 77381)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart Industries is looking for a Field Project Engineer located primarily in The Woodlands, TX. Responsibilities include leading Project Engineering support for proposals and projects, assisting with the development of Process Flow Diagrams (PFDs), Piping and Instrumentation Diagrams (P&IDs), hydraulic analysis, equipment and line specifications, preparing and evaluating bid packages, and interacting with engineering, operation and fabrication disciplines. This person will provide support to Project Management and perform technical interface with customers and vendors.

What Will You Do?

The primary objective of this role is to provide Field Support of Chart Equipment to facilitate a successful handover of Chart designed facilities that include LNG, LH2, etc. to the Clients.
Provide updates to the Project and Management Teams of ongoing construction and installation of Chart Equipment.
The Field Project Engineer will play a vital role in ensuring the safe and efficient construction and commissioning of Chart designed facilities.
Perform P&ID plant walk down activities independently or as part of a team and prepare punch lists.
Participate in P&ID review, HAZOPs, and other design reviews as required.
Provide construction, commissioning, start-up, operations, and maintenance related inputs during design and engineering.
Perform Cold Box and skidded Equipment Walk down activities independently or as part of a team and prepare punch lists.
Coordinate and lead operator trainings prior to start-up and commissioning activities as required.
Provide construction and commissioning advice and guidance to ensure that all systems and equipment are installed and tested according to project specifications and industry standards.
Collaborate with cross-functional teams, including engineers, technicians, and operators, to ensure the successful implementation of startup plans and procedures.
Provide startup oversight to ensure the plant is started up safely and that it meets the performance criteria.
Prepare lessons learned reports and provide feedback to the Engineering teams.
This role will involve extensive travel of approximately 75% of the time.

Your Education Should Be…

BS in Mechanical or Chemical Engineering preferred
3-10 years of related engineering and design experience preferably with natural gas and liquids production or the oil and gas industry

Your Experience Should Be...

Project Engineering experience in related industry is essential.
Experience in Natural Gas Industry including the engineering, design, fabrication, commissioning of mechanical equipment used in petro-chemical or natural gas industries is desired.
Excellent organizational, communication and teamwork capabilities.
Ability to speak publicly and address group audiences.
Knowledge of common engineering practices and Industrial codes including ANSI B31.3 piping code, ASME Section VIII pressure vessel code and other related codes and standards of ANSI, ASME, ASTM, API, IEC, NACE, NEC and NFPA.
Excellent skills with Microsoft Office suite of products.
Ability to solve technical problems and communicate changes to the project team members.
Ability to work with minimal technical supervision and strictly adhere to project schedule and budget. Ability and willingness to follow company procedures in all aspects of employment and performance of job functions.
Ability to technically coordinate projects from concept and development through approval, engineering, procurement, fabrication and completion.
Desire and ability to do hands-on technical work.
Ability to work with field, operation and maintenance personnel at all levels.
Willing and able to travel to company and project requirements.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Project Manager (Allentown, PA, United States, 18104)

Ensuring Chart’s Success…

Chart Industries is looking for a Project Manager for our Cryo Technologies office in Allentown, PA. The Project Manager is responsible for all stages of the job from initiation of the contract to job close and they oversee the engineering, design and fabrication of awarded contracts.

What Will You Do?

Responsible for all commercial and administrative requirements of Projects
Direct and coordinate activities of project personnel to ensure that the project progresses on schedule and within the budget
Lead the project team and all necessary technical disciplines throughout the project’s design, fabrication and as required installation
Ability to follow all company procedures with regards to project reporting and client interface including: Financial/Operations Reviews, Project Planning, Procurement Planning, Budgeting, Staffing and Quality Management
Work with Project Controls and Quality groups as required to support project and departmental requirements
Assist with proposal development and review prior to contract award
Provide technical assistance and problem resolution
Coordinate project activities in order to comply with all design codes, safety regulations, government and regulatory agencies
Review and apply project specifications to engineering, design and fabrication efforts
Review, understand and interpret Customer specifications and contract requirements
Manage Customer and internal documents through the Document Management System
Coordinate material/purchasing requirements, develop requisitions and approve vendor selections
Responsible for cost control, cost forecasting, planning/scheduling, change management, and reporting on projects

Your Experience Should Be...

Preferably, B.S. with M.S. or M.A. in Engineering
5 years hands on project management experience
Ability to manage multiple parallel projects
Excellent computer skills including MS Word, Excel, Access, Power Point, Primavera P6 and other project management programs
Excellent verbal and written communication skills, analytical and problem solving skills
Ability to work with minimal supervision
Ability to work and succeed in a team environment
Experience working in an environment where responsibility and accountability was expected
Proven leadership, management, supervisory and organizational skills
Excellent customer service skills
Conflict resolution skills
Experience working with Industry Standard Codes (ASME, B31, AISC, ASTM, AWS, OSHA)and or international equivalents
Industrial Fabrication or Construction experience
Understanding of Engineering disciplines
Cryogenic gas processing including natural gas and hydrogen liquefaction, and separation and rejection facilities.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Manual Machinist (Night Shift) (Stafford, TX, United States, 77477)

Ensuring Chart’s Success…

What Will You Do?

Your Physical Work Environment Will Require…

Your Experience Should Be...

Our Benefits Package...

Proposal Manager (The Woodlands, TX, United States, 77381)

Ensuring Chart’s Success…

Chart Industries is looking for a Proposal Manager for our office in The Woodlands, TX. We are open to a hybrid schedule for this role. The Proposal Manager will be responsible for the lifecycle of our proposal projects, leading and coordinating proposals and leading New Product Development (NPD) projects for our Heat Transfer System group. This person will also be responsible for managing projects, having technical expertise, interacting effectively with customers, ensuring quality and partnering with business development.

What Will You Do?

Responsible for all commercial and administrative requirements of Proposal and New Product Development (NPD) Projects
Lead and Coordinate activities and align with engineering, commercial, project management, and estimation teams to ensure that the project proposal allows for achievement of schedule and budget
Lead the proposal and/or NPD project with all necessary technical disciplines throughout the project’s design and ensure seamless transition to the project management team for execution.
Ability to follow all company procedures with regards to project reporting and client interface including:
- Financial/Operations Reviews, Project Planning, Procurement Planning, Budgeting, Staffing and Quality Management
Direct the Project Controls and Quality groups as required to support the proposal
Lead proposal development and review prior to contract award
Work directly with commercial in ensuring contract aligns with capacity and availability of fabrication
Provide technical assistance and problem resolution
Review and apply project specifications to engineering, design and fabrication efforts
Review, understand and interpret Customer specifications and contract requirements
Manage Customer and internal documents through the Document Management System
Responsible for cost control, cost forecasting, planning/scheduling, change management, and reporting on projects
Support the TWO systems SIOP program, obtaining and analyzing data as required from finance, commercial, engineering, project controls, and project management

Your Experience Should Be...

B.S. degree in an engineering discipline required
15 years hands on experience, or equivalent combination of education and experience
5 years in front end project development roles
Ability to manage multiple parallel activities
Excellent computer skills including MS Word, Excel, Access, Power Point, Primavera P6and other project management programs
Excellent verbal and written communication skills, analytical and problem-solving skills
Ability to work with minimal supervision
Ability to work and succeed in a team environment
Experience working in an environment where responsibility and accountability was expected
Proven leadership, management, supervisory and organizational skills
Excellent customer service skills
Conflict resolution skills
Experience working with Industry Standard Codes (ASME, B31, AISC, ASTM, AWS, OSHA) and/or international equivalents
Industrial Fabrication or Construction experience
Understanding of Engineering disciplines
Cryogenic gas processing including natural gas and hydrogen liquefaction, and separation and rejection facilities

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Legal Assistant (Renfrew, Scotland, United Kingdom, PA4 8XJ)

The Role

This Legal Assistant role based in Renfrew offers a unique opportunity to support both the legal and administrative needs of a dynamic in-house Legal team. You'll be involved in everything from coordinating external counsel and managing corporate governance processes, to proofreading legal documents and facilitating internal compliance workflows. On the administrative side, you'll maintain legal databases, arrange document signings, manage team logistics, and help oversee legal invoicing and travel.

It’s a hands-on, detail-oriented position ideal for someone with at least three years' experience in legal support—where no two days look quite the same.

Who Are We?

What Will You Do?

Provide corporate governance and entity management support.
Liaise with external counsel and assist with compliance matters.
Review, proofread, and provide commentary on legal documentation.
Contribute to cross-functional legal projects and coordination.
Deliver comprehensive administrative and secretarial support to the Legal team.
Maintain internal legal databases and archives.
Maintain dispute and legal invoicing databases.

What Do You Bring?

Minimum 3 years’ relevant experience in a legal support or administrative role.
Legal education not required, though qualifications in the legal field are welcomed.
Strong attention to detail, multitasking ability, and confidentiality.
Proficiency with legal administrative tools and standard office software.
Excellent organisational and communication skills.

Our Benefits Package...

A flexible, hybrid working environment
Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunities employer

Manager Casting & Quality (Hosur, Tamil Nadu, India, 635103)

Ensuring Chart’s Success…

What Will You Do?

Responsible to technically support the casting supplier’s product and process development with right quality within budget as per Howden global standards.
To provide regional support for Commodity management of Castings, new product development and improve the performance of casting suppliers.
Support Howden Global BU RFQ’s on casting and initiate decisions on supplier selection, technical support and contract execution.

Your Physical Work Environment Will Require…

Drive defined casting supplier development, part development, casting supplier performance, casting process development, part approval process.
Technically support the new casting supplier on part development and process development to meet the Howden Global Quality Standards. Evaluation and selection of new casting suppliers, development of existing suppliers, and overall supplier management.
Work with the casting suppliers to achieve quality, delivery, and cost targets.
Coordinate with the Global team and user companies on all technical requirements of casting.
Take action on the quality improvement of castings.
One point of contact for all the casting development, procurement, and quality aspects.
Drive cost reduction programmes with casting suppliers.
Collaborate with supporting functions (engineering, quality, and regional teams) to achieve the plan.
Drive strategic initiatives on casting supplier rationalization, single source dependency reduction and continuous improvement of the casting Sourcing process
Having experience of handling Global requirements from India related to Castings components.
Manage manufacturing schedules to ensure on-time delivery.

Your Experience Should Be...

Degree-level qualification in technical discipline (Metallurgy or Mechanical Engineering)

Experience in casting process layout, product simulation, product layout, pattern development, process control, melt control, part qualification in a reputed casting company for more than 10 years.

Practical experience and proficiency on material testing and NDT (DPT, MPI, UT & RT) related to cast product.

Should have ASNT Level-2 certification in DPT, MPI, UT & RT

Proficient in the use of Continuous Improvement (CI) techniques and Problem Solving techniques

Commodity Management (Strategic – Castings-SG Iron/Aluminum / Steel casting)

Excellent team player with the ability to work in a matrix environment with multiple customers

Good communication and influencing skills with an ability to clearly present ideas, concepts and processes

Experience delivering programs including KPI’s, supplier performance, improvement plans.

Works under pressure with the ability to multi-task and priorities work.

Quality Engineer (Stafford, TX, United States, 77477)

Ensuring Chart’s Success…

The Quality Engineer position is responsible for participating in formal contract reviews, developing and implementing project specific Inspection Test Plans (ITP), developing and implementing item specific supplier quality control plans, conducting inspections of both manufactured and purchased equipment components, the selection and evaluation of suppliers, and supporting internal and supplier audits.

What Will You Do?

Provides management support for the HUSA ISO 9001 quality systems in accordance with organizational goals and objectives.
Generate various required management reports, e.g. Nonconformance Report status, audit response, etc. in order to provide metrics to monitor continued process improvement.
Manages and participates in regulatory, internal, customer and third party audits in collaboration with other quality staff at all sites to fulfil various quality program requirements.
Interfaces with customers, planning and executing visits to customer locations.
Manages and facilitates nonconformance reporting in collaboration with other quality staff and associated management at applicable site.
Provides budget input for activities, training, and travel to meet financial goals.
Participates in coordinating inspection of incoming material and in-process and final inspections of production material to meet internal and external customer requirements.
Participates in managing the local calibration program in order to ensure that internal and external customer requirements are met.
Qualifies new and existing suppliers and conducts supplier audits in conjunction with the supply chain in order to ensure the supply base is robust and complies with internal and external customer requirements.
Conducts contract review/quotation review to ensure that customer requirements have been identified and can be fulfilled.
Prepares proposal documents, when required, by sales or contract review staff in order to ensure the project can fulfil internal and external customer requirements.
Prepares quality planning documents for customer and supplier submittal to ensure customer requirements are met.
Conducts supplier site inspections of products in support of delivery schedules.
Reviews supplier documentation to support customer sales orders and issues certificates of conformance for customer document packages.
Explores, develops and implements cost and process improvement ideas.
Other duties as assigned by management.

Your Physical Work Environment Will Require…

Your Experience Should Be...

Bachelor’s degree in business, engineering, or related field
A minimum of 10 years experience in quality management systems such as ISO 9001, ASME Section IX and mechanical inspection in a manufacturing or service environment
Experience in forging, casting, fabrication, machining, or assembly of large capital equipment
Ability to organize and manage multiple projects simultaneously with deadlines
Strong interpersonal skills – active listener, clear and concise communicator (both oral and written); proven collaboration skills
Computer literate in Microsoft Office Word, Excel, Outlook and Access. Comfortable navigating the internet
Qualification as an Auditor or Lead Auditor
Ability to create and maintain relationships with customers and vendors
High moral and ethical standards; integrity is continuously apparent
Good analytical skills
Professional certification (ASQ, ASNT, ASME,AWS) preferred
Additional Quality and business certifications – Six Sigma, Lean, etc. preferred
Working knowledge and first hand experience in Nuclear Safety Related Quality programs, including 10 CFR 50 Appendix B, and ASME NQA-1 preferred
Working knowledge of current ERP/MRP system preferred

Our Benefits Package...

Project Manager (Chennai, Tamil Nadu, India, 600077)

Ensuring Chart’s Success…

Chart Industries is a leading global manufacturer of highly engineered equipment and solutions serving multiple applications in the Energy, Industrial, and Industrial Gas end markets. In March 2023 Chart Industries acquired the Howden Group, and the combined group is now represented in over 40 countries worldwide with over 11,700 employees. Our vision is to enable the vital processes of our customers and thereby promote a more sustainable world via our Nexus of Clean™ strategy. The combination of Chart and Howden furthers our global leadership position in process technologies with products and services in applications such as hydrogen, carbon capture, energy recovery, nuclear, water treatment, mining, and LNG to name a few. Together with customer-focused service solutions including an extensive service network and market-leading digital diagnostics, we support our customers through the complete lifecycle of their assets. At Chart we have a strong corporate identity and a clear purpose - you will be a member of our team shaping the future of the company and participating in helping our customers and the world tackle some of the planet's most pressing issues

What Will You Do?

Project coordination in terms of time, cost and deliverables. Order booking in the system after receipt from Marketing and Circulation of Purchase Order and order documents to Design, Planning, Production, Finance and Q.C. departments after verification of required commercial and technical details’ availability.
Submission and obtaining approval for GA drawing, QAP etc. from customer. Submission of ODCs, quotations for transport as and when required
Conducting periodical progress review meeting with internal departments. Preparation and submission of monthly progress reports to customers. Raising inspecting calls & Inspection coordination with customer, production and QC departments Commercial coordination with customer, internal despatch and commercial team regarding despatch instruction, road permit, transporters detail and despatch clearance etc. Recording of customer side delays and use for LD appeals. Making on time delivery status reports, Claims for LDs. Submission of Fan Quality report and O & M Manual by coordinating with QC , Engineering and Service Departments

Your Physical Work Environment Will Require…

Travel to site and supplier places depends on the need

Your Experience Should Be...

BE- Mechanical with 7 to 10 years of Experience in Project Management / Contracts in Manufacturing / EPC Environment Good in Customer interactions. Must have a passion to achieve. Should possess good written/oral communication skills, analytical skills, interpersonal skills. Good in commercial terms and conditions. Initiative and Proactive. PERSONAL ATTRIBUTES Should have skills in working with individuals and as an integral part of a Team. Must have an ear to the ground vis-à-vis market intelligence and able to communicate relevant information in all directions. Must be conversant in both English and local languages and be able to effectively communicate. Skills in Process Management, team building and motivation. Excellent customer service skills and flexibility to create and maintain a positive working relationship across all internal departments. Good understanding of project execution issues and ability to prioritize. Ability to present information and respond to groups

Head Quality (La Union, Murcia, Spain, 30360)

Ensuring Chart’s Success…

Chart Industries is a leading global manufacturer of highly engineered equipment servicing multiple applications in the clean energy and industrial gas markets. Chart employees over 11,700 people based across 64 global manufacturing locations and 50+ service centres. Recognised for an innovative edge and expansive portfolio, our strategic direction includes a focus on sustainable technologies and the development of solutions that contribute to cleaner energy sources, particularly in hydrogen infrastructure. Learn more about us at www.chartindustries.com

What Will You Do?

As an experienced Head Quality in our team, we are looking for someone who will be able to perform the below tasks:

Main Purpose of Job

Manage the maintenance of the quality management system, supervising the correct execution of procedures, technical instructions, etc., in order to meet the company's quality standards

Create and monitor ITP´s (Inspection and test plans) about projects to be executed in HES. Communication with customers about ITP´s follow up and reception, assessment of documents received from suppliers, collection of documents which support the project´s ITP´s.

Accountabilities

Prepare the external and internal non-conformities, monitor them (together with the departments involved), identify and analyse quality issues and provide actions to correct them, together with the involved departments
Represent the company in meetings and commercial steps with clients concerning quality issues, with the Head of Quality support, always attentive to providing
Perform quality controls of processes and products to ensure compliance with the established specifications (Rotors/ Packages/ Elements/ Seals and spare parts/ Structures)
Make decisions regarding the stoppage of manufacturing in the event that established procedures are breached and the quality of the final product delivered to our customers is put at risk, communicating to the Head of Quality

Your Physical Work Environment Will Require…

Residence in Cartagena (Murcia)
Travel 5%

Your Experience Should Be...

Essential skills, knowledge and behaviours

Technical engineering (Industrial specialty)
High level of English
Use of computer tools (Office, Outlook, PowerPoint)
Postgraduate training in ISO 9001-2015 and management systems, preferably a master's degree in quality management

Desirable skills, knowledge and behaviours

Advanced engineering
1 to 3 years of professional experience in quality management
Knowledge of environmental management, occupational health and safety
Knowledge of reading and interpreting design drawings and specifications

What will you get in return?

Competitive salarys
Well-being initiatives and team buildings
Health insurance for you and your family (by policy)

Development Opportunities:

Constant learning opportunities and challenges in interesting projects with a significant impact on the world in a growing company with more than 80 years of experience.
Vertical and horizontal organizational movement

Chart is an equal opportunity employer...

Glass Room - WE Shift (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Grow a Cooler career with Chart Industries by supporting our Fan Shop Operations as a Mold Operator! This position is Friday through Sunday, with ability to pick up other shifts during the week, if desired. Day shift and Night shift availability.

What Will You Do?

Follow and track mold production schedule to maintain minimum stock levels of material
Prepares and cuts fiberglass sheets from template per blade design
Works closely with mold leads and coordinators
Reports equipment malfunction and other issues affecting department
Loads and unloads material within a warehouse or storage facility
Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from mold stations
Knowledge of commonly used concepts, practices, and procedures regarding the glass-room and safety
Work involves frequent lifting and working with fiberglass in a manufacturing setting
Comply with all CHART policies and procedures
Maintains good housekeeping and organization throughout the department
Ensure all products have proper identification
Performs other tasks as assigned

Your Physical Work Environment Will Require…

Walking, Standing, Use of hands, Bending, Lifting, Sitting, Etc.
Indoor and outdoor working conditions
Lifting of materials and product as up to 50 pounds
Able to stand for long periods of time
PPE must be worn at all times
Able to work overtime as required

Your Experience Should Be...

Minimum Education:

High School Education or Equivalent

Minimum Experience and Knowledge:

6-month manufacturing setting, fast paced environment or construction experience

Manual Dexterity required for operating machinery

Detail oriented and organized

Team-work oriented skills

Safety Oriented Skills

Basic Written and Verbal Skills

Our Benefits Package...

Millwright/Rotary Repair Technician (Medina, OH, United States, 44256)

Ensuring Chart’s Success…

Chart Industries is currently seeking a Repair Technician for our Medina, OH facility. This role's primary responsibility of this position is to perform complete repairs on customer equipment for equipment in the Service Center; responsible for working within the overall Service Center team to accomplish the goals of the business in the areas of EHS, Quality, On-Time Delivery, Operating Costs, and Productivity improvements.

What Your Day-to-Day Activities Will Be…

The primary responsibility of this position is to safely deliver the highest value and best customer experience through service to our clients. To achieve this all employees must display high levels of commitment to our ZERO injury culture, quality results, technical proficiency, workplace excellence, and teambuilding dynamics.

Big Picture:

Observing plant safety rules, working practices, and will intervene and escalate appropriately. Efficient communication of shipping and receiving activities, maintaining an organized workspace, accurate time and material transactions, and providing detailed evaluation reports. This position will work individually and with the team to deliver exceptional quality and on- time delivery of Howden products. The position will be responsible for working within the overall Service Center team to accomplish the goals of the business in the areas of EHS, Quality, On-Time Delivery, Operating Costs, and Productivity improvements. Daily Activities and Behavior:

Support the work of all other shop floor personnel while maintaining a safe work environment.
Performs necessary disassembly, diagnosis, inspection, and reassembly of a wide variety of fans and compressors. Inspection may include visual and/or instrument examination. Evaluates the condition of existing parts/components, for possible reuse or replacement.
Willingness to work with other team members in a learning and teaching environment.
Performs any tests such dimensional verification, leak tests, visual examinations.
As required, operates any equipment necessary to accomplish the repair and rebuild of all customer units.
Completes written records, such as check sheets, clearances, pressure tests, inspection reports, etc., as required.
Secures units and parts in preparation for shipment. Duties include some painting and packing as required.
Operates fork truck, overhead crane, company car or pickup truck, for the purpose of loading, unloading, within the Service Center.
Maintains a clean and orderly work area, including such duties as sweeping, emptying trash containers, spillage cleanup, and disposing of scrap parts in the shop, and stacking and organizing parts/units in storage/staging areas within the Service Center.

Your Education Should Be…

High school diploma/GED with at least 3 years of large equipment repair experience

Your Physical Work Environment Will Require…

Ability to lift 25lbs during normal work activities
Environmental and Safety focused
Ability to work in and contribute in a team environment

Your Professional Experience Should Be…

Environmental and Safety focused mindset
Quality focus with attention to detail
Experience in rotating equipment repair
Ability to work in and contribute to a team environment
Ability to lift 25 lbs. during normal work activities
Strong oral and written communication skills
Strong interpersonal skills
Experience operating machine tools such as mills, lathes or drill presses
Understanding or qualifications with NDT testing (Penetrant and Magnetic particle)
OSHA 10- or 30-hour training
Prior work experience with screw compressors, centrifugal fans, axial fans, and reciprocating compressors and components.

Chart is an equal opportunity employer...

Design Engineer (Frankenthal, Rheinland-Pfalz, Germany, 67227)

Ensuring Chart’s Success

Als Konstruktionsingenieur (m/w/d) übernehmen Sie die projektbezogene Konstruktion von Turbogebläsen. Sie arbeiten und bewerten konstruktive Lösungsentwürfe unter Berücksichtigung funktionaler, werkstoff-, fertigungstechnischer und wirtschaftlicher Gesichtspunkte. Eigenverantwortlich erstellen Sie Zeichnungen und Stücklisten, optimieren vorhandene Erzeugnisse, Aggregate und Bauteile, beschaffen und prüfen Konstruktionsunterlagen, berechnen Dimensionen der zu konstruierenden Teile bzw. Baugruppen und fertigen maßstabs- und fertigungsgerechte Teil-, Zusammenbau- und Anordnungszeichnungen an. Zudem stimmen Sie sich mit internen und externen Schnittstellen ab und bearbeiten Fehlermeldungen und Schadensmeldungen.

Über uns

Ihre Aufgaben

Projektbezogene Konstruktion von Turbogebläsen
Ausarbeiten und Bewerten von konstruktiven Lösungsentwürfen unter Berücksichtigung funktionaler, werkstoff-, fertigungstechnischer und wirtschaftlicher Gesichtspunkte
Eigenverantwortliche Zeichnungs- und Stücklistenerstellung
Optimieren vorhandener Erzeugnisse, Aggregate und Bauteile
Beschaffen und Prüfen von Konstruktionsunterlagen
Berechnen von Dimensionen der zu konstruierenden Teile bzw. Baugruppen
Anfertigen von maßstabs- und fertigungsgerechte Teil-, Zusammenbau- und Anordnungszeichnungen
Abstimmen mit internen und externen Schnittstellen
Bearbeiten von Fehlermeldungen und Schadensmeldungen

Ihr Profil

• Erfolgreich abgeschlossenes Studium zum/r Maschinenbauingenieur/in
• Langjährige fachspezifische Berufserfahrung idealerweise im Anlagen-/Maschinenbau
• Gute Englischkenntnisse
• Creo und SAP-Kenntnisse sind wünschenswert
• Ihre Persönlichkeit zeichnet sich durch Kreativität, Analysefähigkeit, Organisationsgeschick und Qualitätsorientierung aus

Unsere Rahmenbedingungen & Benefits

• Gute Vergütungskonditionen im Metall- und Elektrotarif
• Flexible Arbeitszeiten bei einer 35-Stunden-Woche und 30 Tagen Urlaub im Kalenderjahr
• Mobiles Arbeiten
• Kostenloser Firmenparkplatz vorhanden und gute Verkehrsanbindung (5 Min. Fußweg zum Bahnhof)
• Elektroladesäulen am Standort
• Arbeitgeberbeitrag zur Altersvorsorge
• Kantine vor Ort und zahlreiche Betriebssportgruppen
• Mitarbeiter-Benefits (Corporate Benefits, Business Bike etc.)
• Ein innovatives Unternehmen mit einer offenen Unternehmenskultur
• Es erwartet Sie eine umfassende Einarbeitung sowie eine kontinuierliche Weiterbildung

Chart setzt sich aktiv für Chancengleichheit ein

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Björn Kulisch (bjoern.kulisch@chartindustries.com) gern zur Verfügung.

Painter - Fans WE Shift (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

What Will You Do?

Spray paint medium to large parts under a manufacturing/production setting
Works closely with sand and patch area, mold leads and coordinators
Reports equipment malfunction and other issues affecting department
Mixes and sprays different types of paints following deadlines and objectives
Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from mold stations
Knowledge of commonly used concepts, practices, and procedures regarding the paint-booth and safety
Work involves frequent lifting and working with fiberglass in a manufacturing setting
Comply with all CHART policies and procedures
Maintains good housekeeping and organization throughout the department
Ensure all products have proper identification
Performs other tasks as assigned

Your Physical Work Environment Will Require…

Walking, Standing, Use of hands, Bending, Lifting, Sitting, Etc.
Indoor working conditions
Lifting of materials and product as up to 50 pounds
Able to stand for long periods of time
PPE must be worn at all times
Able to work overtime as required

Your Experience Should Be...

Minimum Education:

High School Education or Equivalent

Minimum Experience and Knowledge:

6-month manufacturing setting, fast paced environment or construction experience

Prior experience with Bondo filler and fiberglass

Manual Dexterity required for operating machinery

Detail oriented and organized

Team-work oriented skills

Safety Oriented Skills

Basic Written and Verbal Skills

Our Benefits Package...

Header Welder II (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

What Will You Do?

Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques
Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process
Inspects completed welds to determine structural soundness
Performs a variety of tasks
Promotes and supports safety and production
Makes quality visual U.T. and x-ray welds

Your Physical Work Environment Will Require…

Walking
Standing
Using hands
Bending
Lifting - maximum of 75 lbs.
Sitting
Must be able to work inside and outside

Your Experience Should Be...

High school diploma or its equivalent required

2 - 4 years related experience

Ability to read and interpret shop drawings

Ability to operate overhead-crane

Familiarity with welding machines and hand tools

Knowledge of standard concepts, practices, and procedures within a particular field

Ability to rely on experience and judgment to plan and accomplish goals

Ability to work under general supervision

Ability to work different shifts

Ability to pass 6G Tig test on carbon steel 2” pipe

Ability and willingness to learn to operate basic cutting equipment

Ability to lift

Possesses positive attitude

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Structural Fitter/Welder (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart's Welder position plays a key role in the manufacturing process of Chart’s products. Our Tulsa Independence location is currently seeking candidates interested in the Welder position and growing their skillset with us.

What Will You Do?

Operation of cranes, hand tools and forklifts
Welding of structural material through established manufacturing processes with minimum instruction and minimum supervision
Accurately maintain required records
Maintain cleanliness of assigned work area
Monitor equipment functionality and report maintenance needs
Assist other new welders in learning welding skills
Complete and follow all safety procedures and policies
Complete company provided training to effectively perform required job responsibilities
Other work as assigned

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs

Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling

Frequent pushing, pulling and handling of material

Occasional climbing and working at elevated positions

Repetitive hand movements during welding operations

Your Experience Should Be...

High School diploma or GED

Ability to pass a 3G structural welding test

Proficient in knowledge of blueprint reading and welding symbols

Proficient in welding best practices

Ability to pass a 3G structural welding test
Potential to work up to 6 days a week for 12 hours days
Ability to:
- Adhere to Company Standards and Values
- Adhere to attendance standards
- Meet deadlines for assignments
- Interact personably with co-workers and associates

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Header Welder III (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

What Will You Do?

Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques
Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process
Inspects completed welds to determine structural soundness
Performs a variety of complicated tasks
May lead and direct the work of others

Your Physical Work Environment Will Require…

Walking
Standing
Using hands
Bending
Lifting - maximum of 75 lbs.
Sitting
Must be able to work inside and outside

Your Experience Should Be...

Minimum of four years related welding experience
Knowledge of a variety of the field’s concepts, practices, and procedures
Ability to rely on experience and judgment to plan and accomplish goals
Ability to work different shifts
Ability to lay-out, burn holes, fit and weld nozzles
Ability to read drawings
Ability to lift
Promotes and supports safety, and production
Possesses positive attitude

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Welder (Windsor, CT, United States, 06095)

Ensuring Chart’s Success…

Howden is a global engineering business who focuses on providing clients with industrial products that help multiple sectors improve their everyday processes. Howden’s core focus is on providing quality solutions for air and gas handling, and have over a century of experiences in doing so.

We are currently seeking a Welder based at our Windsor, CT location.

What Will You Do?

Weld components in flat, vertical, or overhead positions
Perform TIG and MIG welding on a daily basis
Reviews blueprints, work instructions, and job specifications to determine appropriate materials, tools, and procedures needed to complete processes
Layout, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers
Weld separately or in combination, using aluminum and stainless steel
Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations and positions for welding
Perform all work in accordance with quality standards and established safety procedures
Maintain a clean and safe work area

Your Physical Work Environment Will Require…

Wear proper PPE for the job
Standing long periods of time
Able to lift 30lbs min
20/20 vision

Your Experience Should Be...

High School Diploma, or GED
5 plus years of welding experience.
Ability to lift up to 25lbs
Must possess mechanical aptitude
Must be able to pass Drug Screening
Current and valid certification a plus
Ability to work overtime if needed.

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Proposal Engineer (Zuidland, Zuid Holland, Netherlands, 3214 VP)

The Big Picture

Howden CPI Netherlands B.V. part of Chart Industries is a leading provider of aftermarket components and services to the global reciprocating compressor market. Throughout the world, our customers count on us for service and solutions that keep their compressors, lubrication systems and business running. With our thorough knowledge of compressor operation and extensive field experience gained from years of collaboration with compressor manufacturers and users, we are proud to help drive growth in the markets we serve and to enable our customers’ success!

We are now looking for a Proposal Engineer to join our Customer Services team and who will assist us in making a valuable difference in the century to come. We ensure that compressors continue to operate for years to come through maintenance plans, supply of OEM parts, service calls and equipment modifications to today's technology or changed operating conditions and repairs. The position is responsible for the technical aspects of all the aftermarket solutions by assessing customer needs by combining appropriate products and services. Furthermore there is the responsability over pricing. The role will have the responsability to help customers with their RFQ in line with our price strategies. The role will be based in Zuidland (ZH) in the Netherlands and reporting in to the Head of Customer Services.

What needs to be done?

Discussing and translating customer requirements into technical solutions with a customer-focused mindset. Focussed on our field service and repair activities.

Studying customers RFQ’s.

Being in contact with customers on technical requirements.
Preparing the scope of technical proposal documents, discussion with the customer and able to sell it at a correct price level.
Assist during technical training of local CHART business units.

What do you need to bring?

Relevant technical education (Bachelor’s degree in Mechanical Engineering or similar).
Technical knowledge due to working experiences as a field supervisor / work preparator who has a commercial interest
Technical and commercial knowledge of the various components and phases of the solution design.
A continuous learning mindset about new customer needs and market trends.
Excellent interpersonal skills, including an open and engaging communication style.
Ability to lead internal (kick off meetings) and external meetings (scope discussions).
Team player, responsible, flexible.
Fluency in English is preferred.

What will you get in return?

We offer the right candidate an interesting and challenging position with responsibility and impact within a professional and international environment in a successful company. You will get the chance to join a team with dedicated and enthusiastic colleagues. As we consider talent management as key to the success of our organization, we offer opportunities for personal and professional development. We offer a salary package that is fully in line with the level of the position combined with an extensive package of fringe benefits.

Interested or do you have any questions?

Are you interested? then you can easily apply with us in a few clicks. Do you have any questions? Then you can contact us with any questions on aico.peek@chartindustries.com.

Mechanic Electrical & Instrumentation (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for a Production Engineer, who will join our Engineering team and will support in making a valuable difference in the century to come. The Production Engineer is an operational mechanic who will perform electro and instrumentation activities in our manufacturing plant in RHeden, The Netherlands.

What Will You Do?

Mount and connect instrumentation and tubing on several components of the largest API 618 compressors in the world and compressors used in the upcoming hydrogen market.
Discuss progress and planning with Shop Supervisor
Receive technical support and instructions from Planning Operations
Create and maintain a safe working environment, every day a step better
Deliver quality in our product
Finish jobs in a timely manner

What do you need to bring?

Experience Requirements

Experience in the E&I area, preferably 1-3 years working experience but internship also counts

Language Capabilities

Ability to communicate in Dutch
Able to understand English, speaking is preferred

Education Requirements

Technical school diploma, specialized in electronica or another area and specialized E&I courses / trainings (LTS, MTS)

What will you get in return?

About us

Sales Manager (Frankenthal, Rheinland-Pfalz, Germany, 67227)

Ensuring Chart’s Success…

As a Sales Manager you will be responsible for driving growth and expanding our customer base within our industrial territories. Your focus will be on building strong relationships with key clients, identifying new business opportunities, and developing strategic approaches to secure high-value contracts. You will play a crucial role in managing proposals, negotiating agreements, and ensuring seamless communication between clients and internal teams.

By leveraging your industry expertise and market insights, you will help position our products effectively while maintaining profitability and customer satisfaction. If you're a results-driven professional with a passion for industrial sales, this is your chance to make a real impact.

Who are we?

What Will You Do?

Develop and grow customer relationships in assigned geographic territories and with key clients.
Identify high-priority projects and coordinate proposal delivery with the Proposal team.
Establish and implement strategic ‘win’ strategies through agents and direct client engagement.
Drive revenue growth by securing bookings within the assigned territory.
Develop existing client relationships while proactively identifying new opportunities.
Present company products and capabilities to potential customers, influencing specifications.

Your Experience Should Be...

Proven experience in sales, business development, or account management within a related industry.
Strong communication and negotiation skills with a customer-focused approach.
Ability to manage multiple projects and priorities effectively.
Proficiency in CRM systems (Salesforce preferred).
Willingness to travel within the assigned territory.

Our Benefits Package

Flexible working hours with a 35-hour week and 30 days of vacation per calendar year
Mobile working
Free company parking available and good transport links (5-minute walk to the train station)
Electric charging stations on site
Employer contribution to pension plans
On-site cafeteria and numerous company sports groups
Employee benefits (corporate benefits, business bike, etc.)
An innovative company with an open corporate culture
You can expect comprehensive training and ongoing professional development

Chart is an equal opportunity employer

QA Supervisor (Stafford, TX, United States, 77477)

Ensuring Chart’s Success…

The Quality Supervisor position is responsible for participating in formal contract reviews, developing and implementing project specific quality plans, developing and implementing item specific supplier quality control plans, oversight and conducting inspections of both manufactured and purchased equipment components, and supporting internal and supplier audits.

What Will You Do?

Provides management support in the Stafford facility and CPI Service Centers for the HUSA ISO 9001, and ISO/IEC 80079-34 quality systems in accordance with organizational goals and objectives.
Generate various required management reports, e.g. Nonconformance Report status, audit response, etc. in order to provide metrics to monitor continued process improvement.
Manages and participates in regulatory, internal, customer and third party audits in collaboration with other quality staff at all sites to fulfil various quality program requirements.
Interfaces with customers when required for Quality items.
Manages and facilitates nonconformance reporting in collaboration with other quality staff and associated management at applicable site.
Provides budget input for activities, training, and travel to meet financial goals.
Participates in coordinating inspection of incoming material and in-process and final inspections of production material to meet internal and external customer requirements.
Participates in managing the local calibration program in order to ensure that internal and external customer requirements are met.
Participate in the development of Service Center Quality programs.
Conducts contract review/quotation review to ensure that customer requirements have been identified and can be fulfilled by HUSA
Provides comments when required, to sales or contract review staff in order to ensure HCPI can fulfil internal and external customer quality requirements.
Prepares quality planning documents / Quality Plans to ensure customer requirements are met. Assures quality plans are submitted when required.
Reviews supplier and Howden project documentation to assure customer requirements were satisfied, issues certificates of conformance and assembles document packages
Supports cost and process improvement ideas.
Reviews supplier documentation to support customer sales orders and issues certificates of conformance for customer document packages.
Explores, develops and implements cost and process improvement ideas.
Other duties as assigned by management.

Your Experience Should Be...

Essential

· Bachelor’s degree in business, engineering, or related field.

· A minimum of 10 years experience in quality management systems such as ISO 9001:2015, mechanical inspection in a manufacturing or service environment.

· Experience in forging, casting, fabrication, machining, or assembly of large capital equipment.

· Ability to organize and manage multiple projects simultaneously with deadlines.

· Strong interpersonal skills – active listener, clear and concise communicator (both oral and written); proven collaboration skills.

· Computer literate in Microsoft Office Word, Excel, Outlook and Access. Comfortable navigating the internet.

· Qualification as an Auditor or Lead Auditor.

· Ability to create and maintain relationships with customers and vendors.

· High moral and ethical standards; integrity is continuously apparent.

· Good analytical skills.

· Ability to travel, international travel may be required.

Desirable

· Master’s degree in related field.

· Professional certification (ASQ, ASNT, AWS).

· Additional Quality and business certifications – Six Sigma, Lean, etc.

· Working knowledge and first hand experience in Nuclear Safety Related Quality programs, including 10 CFR 50 Appendix B, and ASME NQA-1.

· Working knowledge of current ERP/MRP system preferred.

Our Benefits Package...

EMSR Project Manager (Frankenthal, Rheinland-Pfalz, Germany, 67227)

Ensuring Chart’s Success

Über uns

Ihre Aufgaben

Planung, Steuerung und Durchführung von Kundenprojekten
Beurteilung, Anwendung und Umsetzung von Kundenspezifikationen nach europäischen und internationalen Normen und Richtlinien
Kundenberatung und Betreuung
Erstellen von technischen Spezifikationen (z.B.: Schaltschränke, Generatoren, etc.)
Konzepterstellung für Regelung, Schutz und Synchronisierung von Turbogeneratoren
Technische Unterstützung von internen und externen Kunden (z.B.: Inbetriebnahme, Vertriebsunterstützung)
Kontinuierliche Verbesserung von Produkten und Prozessen gehört zum täglichen Arbeiten

Ihr Profil

Aus-/Weiterbildung:

Erfahrung/ Kenntnisse:

Vertiefte Kenntnisse bzgl. elektrischen Maschinen (z.B.: Synchrongeneratoren)
Von Vorteil: Erfahrungen im Bereich Regelungstechnik sowie Kenntnisse im Bereich Instrumentierung und Automatisierung

Persönliche Fähigkeiten:

Lernbereitschaft, Ergebnisorientierung, Analysefähigkeit
Kundenorientierung

Weiteres:

Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift
Grundsätzliche Bereitschaft für gelegentliche Reisen

Unsere Rahmenbedingungen & Benefits

Flexible und unterstützende Arbeitsumgebung

Flexible Arbeitszeiten bei einer 35-Stunden-Woche und 30 Tagen Urlaub im Kalenderjahr
2 Tage Home-Office / Woche
Gesundheitsprogramme
Betriebssportgruppen
Mitarbeiter-Benefits

Vergütung & Konditionen

Sehr gutes Vergütungspaket nach Qualifikationen und Erfahrungen im Metall- und Elektrotarif
Arbeitgeberbeitrag zur Altersvorsorge

Standortkonditionen

Elektroladesäulen am Standort
Firmenparkplatz vorhanden und gute Verkehrsanbindung (5 Min. Fußweg zum Bahnhof)
Kantine vor Ort

Einarbeitung und Weiterbildung

Sehr ausführliche Einarbeitung – abgestimmt auf Ihren Erfahrungs- und Kenntnishintergrund - garantiert
Kontinuierliche Weiterbildungen und Schulungen

Chart setzt sich aktiv für Chancengleichheit ein

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche:

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Susanne Vong (susanne.vong@chartindustries.com) gern zur Verfügung.

Design Engineer (Frankenthal, Rheinland-Pfalz, Deutschland, 67227)

Ensuring Chart’s Success

Über uns

Ihre Aufgaben

Projektbezogene Konstruktion von Turbogebläsen
Ausarbeiten und Bewerten von konstruktiven Lösungsentwürfen unter Berücksichtigung funktionaler, werkstoff-, fertigungstechnischer und wirtschaftlicher Gesichtspunkte
Eigenverantwortliche Zeichnungs- und Stücklistenerstellung
Optimieren vorhandener Erzeugnisse, Aggregate und Bauteile
Beschaffen und Prüfen von Konstruktionsunterlagen
Berechnen von Dimensionen der zu konstruierenden Teile bzw. Baugruppen
Anfertigen von maßstabs- und fertigungsgerechte Teil-, Zusammenbau- und Anordnungszeichnungen
Abstimmen mit internen und externen Schnittstellen
Bearbeiten von Fehlermeldungen und Schadensmeldungen

Ihr Profil

Unsere Rahmenbedingungen & Benefits

• Gute Vergütungskonditionen im Metall- und Elektrotarif
• Flexible Arbeitszeiten bei einer 35-Stunden-Woche und 30 Tagen Urlaub im Kalenderjahr
• Mobiles Arbeiten
• Kostenloser Firmenparkplatz vorhanden und gute Verkehrsanbindung (5 Min. Fußweg zum Bahnhof)
• Elektroladesäulen am Standort
• Arbeitgeberbeitrag zur Altersvorsorge
• Kantine vor Ort und zahlreiche Betriebssportgruppen
• Mitarbeiter-Benefits (Corporate Benefits, Business Bike etc.)
• Ein innovatives Unternehmen mit einer offenen Unternehmenskultur
• Es erwartet Sie eine umfassende Einarbeitung sowie eine kontinuierliche Weiterbildung

Chart setzt sich aktiv für Chancengleichheit ein

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Susanne Vong (susanne.vong@chartindustries.com) gern zur Verfügung.

Project Manager (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Chart Industries is currently seeking for an on-site Project Manager - OEM based in Beasley, TX. While paving the way in the Turbo Expander solutions you will manage the efficient operation of your assigned projects, ensuring delivery of on-time products built to the specification, while maintaining or improving cash flow and margins. You will secure project execution and scheduling processes to ensure customer satisfaction and on-time delivery. This will also include managing the Chart-Client relationship to build the necessary rapport and credibility to assist in the successful delivery of engineered-to-order projects. You will also directly lead the execution of some projects globally, managing internal/external resources to ensure the successful completion of projects and managing the Chart / Client relationship, project cash flows, budgets, and improving project margins.

What Will You Do?

• Lead Turboexpander Projects on behalf of Chart, giving direction to all resources, to ensure the successful execution of all projects.

• Provide clear communication to the team about required goals, responsibilities, performance expectations, and feedback.

• Drive innovation and continuous improvement strategies within the department, and the
business as a whole, to maintain or increase project margins, and improve OTD and cash performance using robust operational processes.

• Drive financial performance in line with commitments. Identify, evaluate, report, and seek to minimize any negative financial variance and ensure cash flow commitments are maintained.

• Own and lead project execution scope management, risk management, and resource management. Drive accountability and ownership of this within the project team and the wider business. Ensure that project risks and opportunities are identified well ahead of time and are mitigated and realized respectively.

• In partnership with Commercial and cross-functional teams, manage the resolution of contractual and commercial issues and disputes.

• Ensure that departmental standards and processes are maintained and updated in line with industry developments and are applied at all times.

• Monitor and report on the KPIs in the area of responsibility and review actions and workflow accordingly.

• Interact and respond to all aspects of Chart Business Excellence (CBE) supporting cost reduction, efficiency, delivery, COPQ, and quality improvements.

• Ensure adherence to Health and Safety standards in compliance with Company policy to ensure safe working environment

Your Physical Work Environment Will Require…

Exposure to Office and Manufacturing Shop Environments

Your Experience Should Be...

• Bachelor’s degree in business, Engineering, or related field OR an equivalent combination of education and work experience

Required

• Demonstrated experience at a supervisory/managerial level.
• Ability to work with customers and lead a team; organized and detail-oriented to stay on top of a project; hard-working, capable of working when required
• Leadership, communication, negotiating, influencing, and interpersonal skills, with the drive and commitment to achieve project deliverables.
• Proven experience in Project Management methodologies, tools, and responsibilities.
• Proven people leadership experience in managing project execution teams in a made-to-order, bespoke project and customer environment.
• Proven commercial awareness.
• Experience in and commitment to customer service
• Experience in financial control within an engineering environment.
• Commitment to the development of a continuous improvement culture.

Desired

• 10+ years' experience in project management
• Rotating Equipment experience
• Experience working in a matrix organization where influence, indirect leadership, and compelling ideas are used to accomplish organizational objectives.
• Master’s degree in business, Engineering, or a related field

This position is not eligible for sponsorship.

Commissioning and Start-up Process/Mechanical Engineer (The Woodlands, TX, United States, 77381)

Ensuring Chart’s Success…

Chart is looking for an experienced Commissioning and Start-up Process/Mechanical Engineer for our office in The Woodlands, TX. This position will include significant travel to commission and startup projects.

What Your Day-to-Day Activities Will Be…

The primary objective of this role is to provide Process/Mechanical Engineering support for commissioning advice and startup oversight to facilitate a safe and successful handover of Chart designed facilities that include LNG, LH2, etc. to the Clients.
The Commissioning and Start-up Process Engineer will play a vital role in ensuring the safe and efficient commissioning and startup of Chart designed facilities.
Write operating manuals for Chart designed facilities based upon engineering designs.
Participate in PID review, HAZOPs, and other design reviews as required.
Provide commissioning, start-up, operations, and maintenance related inputs during design and engineering.
Perform Cold Box and skidded Equipment walk down activities independently or as part of a team and prepare punch lists.
Perform P&ID plant walk down activities independently or as part of a team and prepare punch lists.
Coordinate and lead operator trainings prior to start-up and after commissioning activities as required.
Provide commissioning advice and guidance to ensure that all systems and equipment are installed and tested according to project specifications and industry standards.
Collaborate with cross-functional teams, including engineers, technicians, and operators, to ensure the successful implementation of startup plans and procedures.
Provide startup oversight to ensure the plant is started up safely and that it meets the performance criteria.
When not involved in commissioning and startup activities, perform Process Engineering tasks that include running simulations in HYSYS or Pro/II and generating Process deliverables that include PFD, HMB, Datasheets, PID, Control Narratives, and Cause and Effects.
Prepare lessons learned reports and provide feedback to the Engineering teams.
This role will involve extensive travel up to 50% of the time.

Your Education Should Be…

BS in Chemical or Mechanical Engineering.

Your Professional Experience Should Be…

3+ Years of Startup and Commissioning Experience in LNG, Gas Processing Facilities, Air Separation Units, or other Cryogenic Facilities. Prior experience being part of an operating Oil and Gas/Chemical/Refinery facility will also be considered.
Working knowledge of commissioning, startup, operations, procedures, and best practices.
Prior experience in developing and implementing startup plans, procedures, and checklists.
Prior experience in writing plant operating manuals.
Proficiency in equipment evaluations, troubleshooting, and performance testing.
Strong communication and interpersonal skills, with the ability to collaborate with cross-functional teams and stakeholders.
Working experience in using Process Simulation software, such as ASPEN+, HYSYS, Unisim, Pro/II, etc. is a plus.
Proficient in the use of computer & software tools such as Microsoft Word, Excel, Project, etc.
Some working knowledge of common engineering practices and Industrial codes including ANSI B31.3 piping code, ASME Section VIII pressure vessel code and other related codes and standards of ANSI, ASME, ASTM, CGA, ALPEMA, API, IEC, NACE, NEC and NFPA.
Teamwork and strong interpersonal skills will be essential in this role.
Flexibility and willingness to travel will be important aspects of the job.
Willingness to spend extended periods of time at client plant sites worldwide. This role will involve extensive travel up to 50% of the time.

Chart is an equal opportunity employer...

Need an Accommodation...

Project Engineer (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

This is an exciting and challenging job that will fully utilize your engineering degree and project management skills in a way that few positions can offer. Chart Project Engineers work on all stages of a project, from development through installation and commissioning. The type of work will include feasibility discussions with project management and sales, scheduling, and equipment sizing and analysis to ensure Chart engineering design standards and customer specifications and needs are met.

What Your Day-to-Day Activities Will Be…

Create plans, designs and customer solutions for assigned products and projects.
Develop and maintain process instrumentation diagrams (P&IDs) based on Customer specifications as required for the project.
Perform various calculations and analyses such as, but not limited to, fluid flow analysis, heat leak, pressure vessel thickness, pressure-building, vaporizer sizing, and/or piping and valve sizing, etc.
Assist designers in developing of general arrangement and production/assembly drawings.
Work with sales teams and customers to gain a better understanding of the system requirements and their implications to the system design and proposed solution.
Work with strategic suppliers to determine the correct components to be used in systems.
Provide regular updates of design status, drawings, BOMS and purchased equipment to project management.
Work with the shop and project management to meet customer and engineering requirements for fabrication, assembly and shipping.
Support production personnel during fabrication.
Conduct onsite field checkouts and commissioning of equipment.
On occasion, support the Proposals Team with quotation assistance.
Other duties and responsibilities as assigned by management.

Your Education Should Be…

BS degree required, preferably in Mechanical Engineering

Your Physical Work Environment Will Require…

Working Conditions

Office environment
Engineering lab include outdoor testing
Work related travel may be required (approximately 10% maximum)

Physical Requirements

Frequent standing, sitting and walking
Frequent computer work

Work Hazards:

Production floor environment will involve possible exposure to materials with rough edges, temperature extremes, moving mechanical parts, occasional flying debris, welding flash, chemical cleaning solvents and their odors.
Liquid hydrogen testing

Your Professional Experience Should Be…

4 years of experience preferred in the engineering, design, fabrication and commissioning of mechanical equipment used in the pressure vessel, boiler, or oil and gas industry
Working knowledge of industrial codes and common engineering practices used within the oil and gas industry. Codes of specific interest are ASME B31.3, ASME Section VIII Division 1, and NFPA 52/59A
Experience with MathCAD calculation software
Experience with hands-on technical work which requires partnering with field operation and production staff
Experience with AutoCAD and SolidWorks® CAD modeling software, preferred
Experience with JD Edwards or other ERP and PDM software, preferred
Experience with mass manufacturing facilities, preferred
Excellent oral and written communication skills.
Highly motivated self-starter and a team leader.
Demonstrated ability to plan and manage multiple tasks.
Understanding of heat transfer, structural analysis, and fluid flow.
Basic understanding of cryogenic liquids, compressed gas, and their properties.
Must be proficient with the Microsoft Office, specifically Word, Excel, and PowerPoint.

Our Benefits Package...

•   Paid Time Off (PTO)
•   Medical, Dental and Vision insurance
•   Employer contributions to an HSA account
•   Health Care and Dependent Care Flexible Spending Accounts (FSA)
•   Company-paid short-term and long-term disability coverage
•   Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
•   Up to two weeks of paid family leave
•   401k retirement savings plan including a company match
•   Employee stock purchase program

Chart is an equal opportunity employer...

Need an Accommodation...

Purchasing Supervisor (Windsor, CT, United States, 06095)

Ensuring Chart’s Success…

We are currently seeking a Purchasing Supervisor in our Windsor, CT location.

What Will You Do?

Perform all procurement and planning activities for assigned product groups following established policies, procedures, and quality requirements.
• Track KPI’s for Purchasing department.
• Maintains LDM (Lean Daily Management) and develop action plans to support continuous improvement.
• Represent Purchasing in production and large project meetings.
• Solicit supplier quotations and evaluate bids.
• Review areas in which prices can be re-negotiated; negotiate with current sources to secure the most advantageous terms, highest quality, best delivery, and lowest price.
• Work close with corporate category managers on strategic cost savings projects.
• Maintain the integrity of the item data to assure accurate output of information with a strong emphasis on price and lead time.
• Monitor and Maintain VMI and Consignment programs to prevent stock outs.
• Utilize appropriate planning system within ERP to initiate orders for purchased parts.
• Coordinate and track the arrival of all materials needed to manufacture customer orders.
• Expedite parts as required and immediately notify sales and scheduling of any delays.
• Discusses defective or unacceptable goods with inspection or quality control personnel, users, vendors, and others to determine source of nonconformance and take corrective action.
• Follow up on orders as necessary and expedite overdue orders or those with the potential of critical delays to production.
• Maintain consistent vendor contact to keep informed of changes in pricing and lead time with emphasis on results-oriented relationships.
• Inform the senior supply chain manager of issues that may require immediate action or attention at that level of the organization.
• Work with accounting to clear up any invoicing needs.
• Assist others in the department to solve routine, day-to-day problems and train current or new members of the department.

Your Physical Work Environment Will Require…

Will require the ability to stand, and walk. Ability to work at a desk, with a computer.

Your Experience Should Be...

• Bachelor's degree from an accredited university/college in business or related discipline required.
• Minimum 6 years of work experience in manufacturing procurement.
• Strong knowledge of manufacturing processes.
• Experience in purchasing motors, castings and machined parts is preferred.
• Excellent verbal and written communication skills.
• Detail oriented with a priority of accuracy.
• Good organization skills with a pro-active attitude.
• Must be skilled in Excel, Outlook and Word.
• Knowledge of MRP and experience with ERP systems.

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Fitter (New Iberia, LA, United States, 70560)

Ensuring Chart’s Success…

The New Iberia facility specializes in cold box assembly and fabrication, pressure vessels and other cryogenic equipment as used for the air separation and hydrocarbon industries. The end users of this equipment include all the major LNG, petrochemical and air separation engineering on a worldwide basis. The facility is located at the Port of Iberia.

What Will You Do?

Assist in developing and implementing shop standards and improvements

Provides instruction on fitting techniques, proper tools and proper procedures

Assists in developing and presenting formatted training materials

Works independently in all areas of the shop with fitters and welders in order to raise the level of quality in fitting and solving problems

Works to identify opportunities for technology improvements

Makes training recommendations to supervisors

Provides follow up reports to production supervision on observed deficiencies in fitting

Be able to identify fit up issues rapidly and address them quickly

Promotes safety, honesty and integrity on the job

Required to work at elevated heights up to 75ft

Add’l duties and responsibilities may be assigned

Your Physical Work Environment Will Require…

Your Experience Should Be...

Must have through knowledge of departmental operations

Must have a complete support of safety procedures

Must have thorough knowledge of shop standards

Must be able to communicate professionally with people at all levels and remain calm and objective

Be a self-starter, creative thinker, reliable and able to work with minimal supervision

Must have good communication skills, especially orally. Able to present to a small group

Some computer skill and familiarity with Outlook, Excel, Word, PowerPoint

Classification level of Fitter A1 is required

Our Benefits Package...

Field Systems Engineer (New Prague, MN, United States, 56071)

Ensuring Chart’s Success…

This is an exciting and challenging job that will fully utilize your experience and project management skills in a way that few positions can offer. Chart's Field Engineers/Technicians are involved in the factory acceptance testing, installation, and commissioning of our cryogenic engineered systems and equipment. They are the final impression left on our customers and are crucial in obtaining repeat business from our customer base. The type of work will include design reviews with the project engineering teams, troubleshooting and testing of new equipment at the factory, working directly with customer and contractors on-site to provide guidance on the installation methods of Chart equipment, commissioning and startup activities, training end-users on the operation, maintenance and safety practices of Chart equipment, and providing feedback and lessons-learned to our engineering and design teams.

What Will You Do?

With the assistance of the project engineers and controls engineers assigned to each project, walk down and function test equipment prior to final shipment to the customer. Support production personnel with any alterations required during factory testing
Conduct on-site field checkouts, commissioning and startup activities of the equipment after it is installed and train customer personnel on how to operate and maintain the equipment
Create and maintain factory testing plans, commissioning plans, and training documentation, as needed
Create field reports and punch-lists after returning from each site visit and assist the project management team with closing out any open items.
Review project documentation and operating manuals to become familiar with each system prior to each site visit and plan each trip accordingly.
Work with project management teams and customers to gain a better understanding of the scope of commissioning, site support, and training sold or required by each project
Provide regular updates of travel status, customer schedules, and purchased tools or equipment to associated project managers
Other duties and responsibilities as assigned by management

Your Physical Work Environment Will Require…

Office and on-site environments, many of which are active construction sites
Engineering lab activities, including outdoor field testing
Production floor environment will involve possible exposure to materials with rough edges, temperature extremes, moving mechanical parts, chemical cleaning solvents and their odors
Cryogenic liquid testing that would involve possible exposure to cold surfaces and all common hazards associated with pressurized piping systems
Work related travel will be required (approximately 75%)
Frequent standing, sitting, walking. Working at heights is not uncommon.
Frequent computer work.

Your Experience Should Be...

4 years of experience preferred in the engineering and commissioning of mechanical equipment such as valves, pumps vaporizers, used in the pressure vessel, boiler, or oil and gas industry
Working knowledge of industrial codes and common engineering practices used within the oil and gas industry (specific interest in ASME Section VIII, ASME B31.3, and NFPA 59A)
Experience with industrial controls (specifically Allen Bradley packages)
Experience with diagnostic tools such as a multimeter, ammeter, megohmmeter, HART communicator, etc.
Experience with hands-on technical work and support of field service and production staff
Excellent oral and written communication skills
Experience and understanding of heat transfer, structural analysis, and fluid flow
Basic understanding of cryogenic liquids, compressed gases, and their properties
Proficient with the Microsoft Office Suite (specifically Word, Excel, Project

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Project Manager (Orem, UT, United States, 84057)

Ensuring Chart’s Success…

Chart Industries is looking for a Project Manager for our office in either Orem, UT or The Woodlands, TX. We are open to a hybrid schedule for this role. The Project Manager will support our Cryogenic Carbon Capture business and be responsible for all stages of projects from initiation of the contract to job close. The Project Manager oversees the engineering, design and fabrication of awarded contracts.

What Will You Do?

Responsible for all commercial and administrative requirements of Projects
Direct and coordinate activities of project personnel to ensure that the project progresses on schedule and within the budget
Lead the project team and all necessary technical disciplines throughout the project’s design, fabrication and as required installation
Ability to follow all company procedures with regards to project reporting and client interface including:
- Financial/Operations Reviews, Project Planning, Procurement Planning, Budgeting, Staffing and Quality Management
Work with Project Controls and Quality groups as required to support project and departmental requirements
Assist with proposal development and review prior to contract award
Provide technical assistance and problem resolution
Coordinate project activities in order to comply with all design codes, safety regulations, government and regulatory agencies
Review and apply project specifications to engineering, design and fabrication efforts
Review, understand and interpret Customer specifications and contract requirements
Manage Customer and internal documents through the Document Management System
Coordinate material/purchasing requirements, develop requisitions and approve vendor selections
Responsible for cost control, cost forecasting, planning/scheduling, change management, and reporting on projects

Your Experience Should Be...

B.S. with M.S. or M.A.
10+ years of hands on project management experience, or equivalent combination of education and experience
Experience with cryogenic gas processing projects including natural gas and hydrogen liquefaction and separation and rejection facilities
Ability to manage multiple parallel projects
Excellent computer skills including MS Word, Excel, Access, Power Point, Primavera P6 and other project management programs
Excellent verbal and written communication skills, analytical and problem solving skills
Ability to work with minimal supervision
Ability to work and succeed in a team environment
Experience working in an environment where responsibility and accountability was expected
Proven leadership, management, supervisory and organizational skills
Excellent customer service skills
Conflict resolution skills
Experience working with Industry Standard Codes (ASME, B31, AISC, ASTM, AWS, OSHA)and or international equivalents
Industrial Fabrication or Construction experience
Understanding of Engineering disciplines

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

CNC Programmer (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

CNC Programmers create the programs required to manufacture machined parts.

What Will You Do?

To accomplish this job successfully, an individual must be able to perform each essential function satisfactorily. Set up and operate numerical control program machines to fabricate parts by performing the following duties:

Plan numerical control program to control contour path machining of metal parts on automatic machine tools.
Analyze drawings, sketches, and design data of part to determine dimension and configuration of cuts.
Determine reference points and direction of machine cutting paths.
Compute angular and linear dimensions, radii, and curvatures, and outlines sequence of operations required to machine part.
Prepare geometric layout on graph paper or using computer-assisted drafting software to show location of reference points and direction of cutting paths.
Ability to write instruction sheets and cutter lists to guide setup and operation of machine.
Ability to write programs of machine instructions in symbolic language to encode numerical control tape or direct numerical control database to regulate movement of machine along cutting path.
Compare encoded tape or computer printout with original program sheet to assure accuracy of machine instructions.
Revise program to eliminate instruction errors or omissions.
Observe operation of machine on trial run to prove taped or programmed instructions.
Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime.
Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management.
Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department.
Analyzes job orders, engineering drawings, technical specifications and/or other design data
Prepares geometric layouts from graphic displays
Recommends improvements or optimization that improves quality and/or efficiency of operations
Accurately determines or calculates necessary dimensions, makes cutting tool selections, and identifies appropriate machine speeds and feed rates
Determines and creates required reference points for machine cutting paths and the sequence of machine operations
Interacts with machine operators and other personnel to identify and resolve programming issues
Complies with applicable business processes and work procedures
Adheres to safety guidelines and procedures; proactively identifies job hazards and collaborates with leadership to minimize hazards and ensure employee safety
Regular attendance on-site at the workplace is required

Your Physical Work Environment Will Require…

To perform the essential functions of the role, employees must be able to perform the following activities with or without reasonable accommodations:

Sit for prolonged periods at a desk and working on a computer
Regularly stand and walk
Occasionally climb steps or stairs
Constantly communicate verbally and in writing (English) in person and using a phone, texts or other messaging, and email
Use hands and fingers to operate computer keyboards, mouse, or other peripherals
May occasionally lift and push/pull items weighing up to 50 lbs or assist operators in material handling to resolve issues at the machine

The normal work environment is a typical office setting; however occasional site visits will be required and the employee may be exposed to excessive noise, dust, fumes, vapors, and hazards including multi-axis CNC machines, cranes, forklifts and other moving equipment. The use of PPE, including hearing protection, eye protection, and use of safety footwear may be required during these visits.

Your Experience Should Be...

HS Diploma or GED is preferred
Vocational training in drafting, design, CNC machining programming, or other similar engineering technical training is required
Minimum of 4 years of CNC machine programming experience is required; requires a broad knowledge of machining techniques and CNC machine tool operating procedures
Demonstrated experience in accurately interpreting engineering drawings and PCMs
Experience using programming and modeling software such as Catia and SolidWorks is required
Working knowledge of NX and Vericut is required
Experience using Predator is preferred
Aerospace industry experience is advantageous

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Maintenance Technician - 3rd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

2nd Shift: Sunday thru Thursday- 3:30pm to12:30am

Differential Pay offered for 2nd and 3rd shifts at +$2.50/hour

What Will You Do?

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

· Performs daily, weekly, and monthly preventative maintenance on all plant equipment

· Performs troubleshooting, problem solving, and countermeasure activities on all production and facility equipment

· Performs mechanical maintenance with frequent electrical (480V, 208V, 120V, 24VDC) and controls-related troubleshooting

· Dismantles machines or equipment using hand tools or power tools to examine parts for defects and repairs or replaces

· Completes daily maintenance paperwork for assigned Work Requests and Checklists

· Assists with installing conduit and wiring for new equipment installations

· Performs special duties as assigned by Maintenance Supervisor/Manager

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

· Thorough understanding of maintenance troubleshooting for electrical, mechanical, hydraulic and pneumatic manufacturing equipment

· Working knowledge of 480 Volt 3 phase power, logic controllers, motor starters and variable frequency drives

· Ability to read and follow written instructions

· Ability to read and interpret electrical and instrumentation drawings and specifications

· Open scheduling availability

Your Physical Work Environment Will Require…

INTERACTION:

· Works with Lead/Supervisor

WORKING CONDITIONS:

· Mostly Outdoor/Shop Environment

· Must be able to work outdoor and indoor

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:

· Safety Glasses

· Steel Toe Shoes

· Ear Plugs

· Gloves (when needed)

· Hard Hats (when needed)

PHYSICAL REQUIREMENTS:

· Walking

· Standing

· Using hands

· Bending

· Lifting

· Sitting

· Climbing

Your Experience Should Be...

Minimum Education:

High School Diploma or Equivalent

Trade or Technical school a plus

Minimum Experience:

3+ years of electrical maintenance experience

1+ years of experience with manufacturing machine repair, welding machine. Presses, etc.

1+ years of experience in a manufacturing environment desirable

Experience with troubleshooting PLC based control systems desired, but not required

Strong background in electrical troubleshooting highly recommended

Skills Required: (i.e. certifications, licenses, registrations, etc.):

Welding and fabrication skills considered a plus

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Project Manager (The Woodlands, TX, United States, 77381)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart Industries is looking for a Project Manager for our office in The Woodlands, TX. We are open to a hybrid schedule for this role. The Project Manager will be responsible for all stages of the job from initiation of the contract to job close. The Project Manager oversees the engineering, design and fabrication of awarded contracts.

What Will You Do?

Responsible for all commercial and administrative requirements of Projects
Direct and coordinate activities of project personnel to ensure that the project progresses on schedule and within the budget
Lead the project team and all necessary technical disciplines throughout the project’s design, fabrication and as required installation
Ability to follow all company procedures with regards to project reporting and client interface including: Financial/Operations Reviews, Project Planning, Procurement Planning, Budgeting, Staffing and Quality Management
Work with Project Controls and Quality groups as required to support project and departmental requirements
Assist with proposal development and review prior to contract award
Provide technical assistance and problem resolution
Coordinate project activities in order to comply with all design codes, safety regulations, government and regulatory agencies
Review and apply project specifications to engineering, design and fabrication efforts
Review, understand and interpret Customer specifications and contract requirements
Manage Customer and internal documents through the Document Management System
Coordinate material/purchasing requirements, develop requisitions and approve vendor selections
Responsible for cost control, cost forecasting, planning/scheduling, change management, and reporting on projects

Your Experience Should Be...

Preferably, B.S. with M.S. or M.A. in Engineering
5 years hands on project management experience
Equivalent combination of education and experience
Ability to manage multiple parallel projects
Excellent computer skills including MS Word, Excel, Access, Power Point, Primavera P6 and other project management programs
Excellent verbal and written communication skills, analytical and problem solving skills
Ability to work with minimal supervision
Ability to work and succeed in a team environment
Experience working in an environment where responsibility and accountability was expected
Proven leadership, management, supervisory and organizational skills
Excellent customer service skills
Conflict resolution skills
Experience working with Industry Standard Codes (ASME, B31, AISC, ASTM, AWS, OSHA)and or international equivalents
Industrial Fabrication or Construction experience
Understanding of Engineering disciplines
Cryogenic gas processing including natural gas and hydrogen liquefaction, and separation and rejection facilities.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Field Service Engineer (Renfrew, Scotland, United Kingdom, PA4 8XJ)

The Role

As a Field Service Engineer, it will be your responsibility to represent Howden worldwide and collaborate with our diverse pool of clients to provide technical assistance during overhaul, repair, maintenance, fault finding, installation and commissioning of reciprocating gas compressors. You will also provide a full engineering service support for our customers and develop and manage exceptional customer relationships through excellence in terms of technical capability and through personal interaction with customers. This an international role and will require you to travel abroad and offshore when required.

Who are we?

CPI, part of the Howden group, is an international manufacturing and service company focused on providing the best aftermarket solutions for the compression industry. With a history of more than 120 years of combined business experience, CPI traditionally focused on being a solutions provider for difficult applications in the reciprocating compression industry by using the highest quality proprietary materials designed by CPI. Today CPI has evolved to bring an even broader scope of capability such as revamps and modernisation for the whole compressor package by harnessing our OEM expertise within Howden.

What will you do?

Carryout all aspects of reciprocating compressor service and maintenance including all ancillary equipment at customer sites in the UK, offshore and abroad. This will involve working on routine jobs individually or on more complicated projects as leader of a team.
Identify tooling and spares requirements
Keep accurate records of times worked and submit a signed timesheet on a weekly basis.
Works Closely and Communicates with; sales department, purchasing, other CPI divisions.
Identifies opportunities for emergent work and liaises with sales to ensure that CPI make the most of any on site outage feedback/intelligence or emergent work opportunities
Works to achieve specific objectives set by Field Service Manager
Available to travel to customer sites to join teams and/or troubleshoot problems as required
Ensuring compliance with the rules and regulations relating to Health, Safety and the Environment
Attend safety meetings where required. Complete accident report forms as and when required
Conduct accident investigations as and when required.

What do you bring?

An ideal candidate would likely have the following profile;

Knowledge of site maintenance and repair of Reciprocating Compressors
Develop and manage good customer relationships through the provision of professional customer management
Demonstrable experience and a strong focus on health and safety
Ability to supervise others on site during maintenance and commissioning activities
Ability to work as part of a team or as an individual
Experienced working on international assignments including where English is not the main language
Proficient in Microsoft Office products and able to produce detailed written technical documents including but not limited to site reports, time sheets and completing monthly expenses.
Qualifications in Mechanical Engineering/Maintenance

Our Benefits Package

Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunities employer

Regional Sales Manager (Prague, Prague, Czech Republic, 25081)

Zajišťujeme úspěch společnosti Chart ...

Jsme součástí nadnárodní společnosti Howden & Chart Industries - Vaše práce bude mít tedy přesah i do zahraničí. Jsme zakázková výroba v oblasti výroby, opravy a servisu kompresorů. U nás najdete možnost dalšího rozvoje, kde můžete využít svých zkušeností obchodníka.

Hledáme zdatného obchodníka, který nám pomůže expandovat na nových trzích k potenciálním zákazníkům a realizovat další tržní příležitosti v oblasti prodeje kompresorů, jejichž obrat dosahuje více než pětset milionů korun s potenciálem dalšího růstu, a který bude jak zastupovat veškeré další produkty společnosti Howden & Chart, tak hledat servisní příležitosti pro Turbomachinery.

Jaká bude Vaše každodenní činnost ...

Aktivní akviziční činnost v ČR, SR a Maďarsku.
Péče o stávající i nové klienty.
Přenesení požadavků od zákazníka do společnosti a obráceně.
Vedení nabídkového/projektového týmu před realizací nabídky.
Komunikace interní i externí, cesty za zákazníky, přenesení požadavků na komplexní řešení technologie zákazníků do stavu zakázky.
Budete:
- aktivně spolupracovat s projektovým managementem během realizace zakázky.
- zastupovat veškeré další produkty společnosti Howden & Chart Industries

Vaše vzdělání by mělo být ...

SŠ ideálně technického zaměření - není podmínkou

Vaše pracovní zkušenosti by měly být ...

Aktivní realizace obchodní činnosti v zahraničí (znalost AJ nutností a jiný jazyk výhodou).
Technické myšlení - strojařina Vás - baví/ zajímá.
Relevantní zkušenosti s dodávkami pro energetiku, ropný a chemický průmysl. Ideálně z projektové výroby.
Váš přístup je "zakousnout se a nepustit".
Skvělé vyjednávací a prezentační schopnosti.
Týmový hráč, protože bez souhry celého kolektivu se nedosáhne úspěchu v daném projektu.

Co Vám můžeme nabídnout ...

Flexibilní pracovní dobu (vše je na domluvě)
Skvělý kolektiv lidí, ale především expertů v oboru
Benefity jako např. 5 týdnů dovolené, příspěvek na jazykové kurzy, příspěvek na penzijní/životní připojištění/dlouhodobý investiční produkt, stravenkový paušál, příspěvek na dojíždění, Multisport kartu atd.
Příjemné pracovní prostředí ve zcela nové budově v parku P3 Prague D11 Nehvizdy
Firemní svozy z metra Černý Most / vlakové stanice Mstětice
Nástup možný ihned, ale případně si na Vás rádi počkáme
...a hlavně práci, která má smysl.

Welder Helper (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

The Welder Helper performs a variety of general manual labor tasks, including, but not limited to, lifting and moving materials, loading and unloading vehicles, and other activities in a helping or assisting mode.

What Will You Do?

Applies basic skills and may develop advanced skills appropriate welding.
Duties may include cleaning and preparing a job site, loading and delivering materials and using a variety of tools and machines, such as blowtorches, forklifts, levels, lifts, power drills, grinders, saws, pressure washers and water spraying equipment.
May be responsible for setting up and taking down ladders, and other temporary structures.
Maybe responsible for setting up workstations, transporting materials or operating machines to assist in the building processes

Your Physical Work Environment Will Require…

Manufacturing Plant Environment
Warehouse driving such as forklift, lift trucks, etc
Shipment transport, driving box truck, etc
Lift up to 50 lbs.
Sitting, standing, stooping, bending, other movement as necessary
Manufacturing Plant – required PPE when necessary

Your Experience Should Be...

Currently in Welding School or completed Welding School
High School Diploma or equivalent
Ability to pass the AWS weld test now or in the near future
- Performs work under direct supervision.
- Handles basic issues and problems, and refers more complex issues to higher-level staff.
- Possesses beginning to working knowledge of subject matter.
- Physical stamina.
- Ability to stand for long periods of time.
- Ability to lift/move heavy objects.
- Ability to understand and follow directions.
- Ability to:
  - Adhere to Company Standards and Values
  - Follow attendance guidelines and structure
  - Meet deadlines for assignments
  - Interact personably with co-workers and associate

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Production Assembler - Fans (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

What Will You Do?

Performs general manual labor tasks, including loading, unloading, lifting, and moving product
Works with leads, coordinators, painter and sand & patch dept.
Reports equipment malfunction and other issues affecting department
Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move product to and from assembly to paint booth
Knowledge of commonly used concepts, practices, and procedures under a manufacturing setting
Work involves frequent lifting and working with fiberglass in a manufacturing setting
Comply with all CHART policies and procedures
Maintains good housekeeping and organization throughout the department
Ensure all products have proper identification
Use of power tools and Bondo filler to work on touch ups as needed
Performs other tasks as assigned
Keep up with production demand to maintain minimum stock levels of products

Your Physical Work Environment Will Require…

Walking, Standing, Use of hands, Bending, Lifting, Sitting, Etc.
Indoor working conditions
Lifting of materials and product as up to 50 pounds
Able to stand for long periods of time
PPE must be worn at all times
Able to work overtime as required

Your Experience Should Be...

Minimum Education:

High School Education or Equivalent

Minimum Experience and Knowledge:

3-month manufacturing setting, fast paced environment or construction experience

Manual Dexterity required for operating machinery

Detail oriented and organized

Team-work oriented skills

Safety Oriented Skills

Basic Written and Verbal Skills

Understanding and reading of Tape Measure

Our Benefits Package...

Machinist (La Crosse, WI, United States, 54601)

Ensuring Chart’s Success…

“Cooler Together” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so that’s how we got our “Cooler By Design®” tagline. Of course, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers and strive to work together as a team, making us “Cooler Together”. With our recent acquisition of Howden, we’re also “Stronger Together”. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too. Interested to learn more? Take a tour of Chart City (https://chartcity.chartindustries.com/) to get a feel of how Chart equipment solutions impact our daily lives. Chart is looking for bright, talented candidates that have a desire for a career in an exciting and evolving industry. This could be you!

Machinist will set up and operates all machining and related equipment in the machine shop area.

***For further consideration, please completely fill out the application and attach your most up to date resume in either PDF or WORD format. Must show up to seven (7) years of work experience as applicable.

What Will You Do?

The employee who performs this job has the responsibility to maintain proper housekeeping in the work area and keep machines in good operating condition. Is also responsible for the safety and quality workmanship and procedures.

• Sets up and operates all horizontal and vertical mills in the machine shop area.
• Faces, turns, mills, chamfers, drills, threads, slots and bores aluminum, steel products and assemblies using the above machines.
• Change milling tools and other tools as required.
• Sets up and operates engine lathe.
• Sets up and operates a radial drill press.
• Performs drilling, tapping, reaming, boring, counterboring, chamfering and hole sawing using the above machines.
• Sets up and operates all single spindle drill presses.
• Drills, reams, counterbores, chamfers, and taps various parts using the above machines.
• Sets up and operates a 5-ton hydraulic press to straighten and size parts.
• Sets up and operates all saws. Operations included are saws pipe, angles, flat plate, miters and scarfs header bodies from aluminum or steel.
• Sets up and operates power and hand rollers to form parts per print.
• Sets up and operates nibbler using it to rough cut material and cut 1/4" parting sheets.
• Sets up and operates pedestal grinder use in sharpening tools and bits.
• Sets up and operates a band saw spot welder station to assemble saw blades.
• Sets up and operates a plasma cutter to include the usage of a PLC.
• Sets up and operates 500-ton brake press to form, straighten and size parts.
• Cleans parts in cleaning tanks.
• Maintains cleaning tanks.

Your Physical Work Environment Will Require…

Works in the average factory environment being exposed to cutting oils, noise, sharp edges, moving equipment, hot flying chips, some smoke, and with chemical cleaning solutions. Must wear side shields and additional safety equipment where required. Requires standing, sitting, bending, reaching, pulling, and most lifting 0 to 50 lbs. When lifting over 50 lbs., two people are required.

Your Education and Experience Should Be...

The incumbent must have sufficient knowledge and ability to:

* High School diploma (or GED)
• Read prints and interpret machining requirements.
• Set up and operate machines and equipment listed above.
• Modify and use tooling and fixturing.
• Use all measuring devices associated with machining to close tolerances (.000 to .060).
• Must use math using decimals and fractions.
• Must understand good machining practices (feeds, speeds, cutters, and materials).
• Good hand/eye coordination.
• Ability and knowledge to check and verify that all parts meet requirements and specifications.

Our Benefits Package...

Our Benefits | Chart Industries

**Sponsorship is not offered for this role.

Obráběč (Prague, Prague, Česká republika, 25081)

Zajišťujeme úspěch společnosti Chart...

Do výrobního týmu hledáme kolegu nebo kolegyni na pozici obráběč pro oblast soustružení. Na této pozici byste využil/a své znalosti a zkušenosti z oblasti soustružení na karuselu. Jsme zakázková výroba v oblasti výroby, opravy a servisu kompresorů. U nás najdete možnost dalšího rozvoje, kde můžete využít svých zkušeností z oblasti obrábění.

Jaká bude Vaše každodenní činnost...

•   Seřizovat a obsluhovat konvenční, nekonvenční a číslicově řízené stroje při strojním obrábění součástí, na NC karuselu dle technické dokumentace
•   Dodržovat výrobní a technologickou kázeň, práci dle výkresové dokumentace, předpisy a směrnice dle pravidel ISO
•   Dodržovat pravidla BOZP a PO
•   Podílet se na zaškolování a předávání know-how ostatním pracovníkům

Vaše vzdělání by mělo být...

SOU nebo SS

Vaše pracovní prostředí bude vyžadovat ...

• Uživatelská znalost IS/SW
• Čtení výkresové a technické dokumentace
• Samostatnost, časová flexibilita
• Ochotu se učit novým postupům
• Zodpovědnost a schopnost se rozhodovat

Co Vám můžeme nabídnout ...

• Flexibilní pracovní dobu (vše je na domluvě)
• Skvělý kolektiv lidí, ale především expertů v oboru
• Benefity jako např. 5 týdnů dovolené, možnost ubytovny, stravenkový paušál, příspěvek na dojíždění, jazykové kurzy, příspěvek na penzijní/životní připojištění/příspěvek na dlouhodobý investiční produkt, Multisport kartu atd.
• Příjemné pracovní prostředí ve zcela nové budově v parku P3 Prague D11 Nehvizdy
• Firemní svozy z metra Černý Most / vlakové stanice Mstětice

Obráběč (Prague, Prague, Czech Republic, 25081)

Ensuring Chart’s Success…

What Will You Do?

Your Physical Work Environment Will Require…

SOU nebo SS

Your Experience Should Be...

Our Benefits Package...

Field Systems Engineer (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

What Will You Do?

With the assistance of the project engineers and controls engineers assigned to each project, walk down and function test equipment prior to final shipment to the customer. Support production personnel with any alterations required during factory testing
Conduct on-site field checkouts, commissioning and startup activities of the equipment after it is installed and train customer personnel on how to operate and maintain the equipment
Create and maintain factory testing plans, commissioning plans, and training documentation, as needed
Create field reports and punch-lists after returning from each site visit and assist the project management team with closing out any open items.
Review project documentation and operating manuals to become familiar with each system prior to each site visit and plan each trip accordingly.
Work with project management teams and customers to gain a better understanding of the scope of commissioning, site support, and training sold or required by each project
Provide regular updates of travel status, customer schedules, and purchased tools or equipment to associated project managers
Other duties and responsibilities as assigned by management

Your Physical Work Environment Will Require…

Office and on-site environments, many of which are active construction sites
Engineering lab activities, including outdoor field testing
Production floor environment will involve possible exposure to materials with rough edges, temperature extremes, moving mechanical parts, chemical cleaning solvents and their odors
Cryogenic liquid testing that would involve possible exposure to cold surfaces and all common hazards associated with pressurized piping systems
Work related travel will be required (approximately 75%)
Frequent standing, sitting, walking. Working at heights is not uncommon.
Frequent computer work.

Your Experience Should Be...

4 years of experience preferred in the engineering and commissioning of mechanical equipment such as valves, pumps vaporizers, used in the pressure vessel, boiler, or oil and gas industry
Working knowledge of industrial codes and common engineering practices used within the oil and gas industry (specific interest in ASME Section VIII, ASME B31.3, and NFPA 59A)
Experience with industrial controls (specifically Allen Bradley packages)
Experience with diagnostic tools such as a multimeter, ammeter, megohmmeter, HART communicator, etc.
Experience with hands-on technical work and support of field service and production staff
Excellent oral and written communication skills
Experience and understanding of heat transfer, structural analysis, and fluid flow
Basic understanding of cryogenic liquids, compressed gases, and their properties
Proficient with the Microsoft Office Suite (specifically Word, Excel, Project

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Quality Inspector III (New Iberia, LA, United States, 70560)

Ensuring Chart’s Success…

What Will You Do?

Perform dimensional checks
Perform as-built measurements
Perform visual inspection of welds and dimensional verifications
Be able to read Jaeger 1 on an eye chart from a distance of not less than 12 inches and be able to pass a color contrast test to verify that they are not color blind
Coordinate with production for radiography and other NDE test
Perform pipe bend checks and black light inspection for oxygen service
Check anchor profile and dry mill paint inspections
Perform internal sampling audits
Perform Radiographic film Interpretation
Oversee third party NDE services on assigned projects
Perform inspections to ensure compliance with quality program and customer requirements
Perform routine inspections to ensure compliance with ASME requirements
Perform pressure tests on finished products to verify leak and structural integrity
Required to work at elevated heights up to 75ft
Add’l duties and responsibilities may be assigned

Your Physical Work Environment Will Require…

Required to work at elevated heights up to 75ft.

Your Experience Should Be...

High school diploma or equivalent
10 years experience in the welding and construction industry
Current CWI preferred
ASME experience preferred
Ability to read structural and piping blueprints
Understanding of document controls and welding procedures preferred
Education may be substituted by extended experience

Our Benefits Package...

Production Manager (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

The Production Manager will be responsible for day-to-day oversight of Chart Industries' Air Cooled Heat Exchanger manufacturing operations associated with production in our Beasley, TX manufacturing facility, which designs, manufactures, and services air-cooled heat exchangers, fiberglass fans, and waste water management blower skids.  
The ideal candidate will be a strong leader and results driven.  Effective communicator able to formulate and present information to employees, as well as management and customers.  Define problems, collect and analyze data, establish facts, draw conclusions and offer insights and solutions.  This position will require a passion for safety, developing people and processes.

What Your Day-to-Day Activities Will Be…

•   Success will be measured based on: Quality, On Time Delivery, Lead Times, Labor Efficiency, Cost, Safety audit and incident rate, Productivity improvements
•   Drive a safety-based culture through work practices, procedures and adherence to OSHA regulations
•   Develop, establish and implement long range and short-term plans, operation policies, etc. for the location.
•   Provide direct leadership of the continuous improvement vision, objectives and developing corrective actions
•   Supervise and coordinate the various programs essential to manufacturing, e.g. training, safety, housekeeping, work simplifications, cost reduction, wage and salary administration, plant protection and security, etc.
•   Plan and determine direct and indirect manpower requirements based on forecasts.
•   Delegate projects to Managerial and Staff Personnel for research, development and evaluation of adaptability, economic feasibility and extent of procedural change.
•   Ensure appropriateness of the Quality Policy and effectiveness of Quality System through measures.
•   Maintain close surveillance over operations through perusal of reports, staff meetings, observation and personal contact to assure ordinate and integration of work-flow, timely production, budgetary conformance, schedules, and utilization of personnel, skills, machines, equipment and facilities.
•   Must demonstrate lean thinking and apply related lean principles that drive waste elimination improving other working capital.

Your Education Should Be…

• Bachelor’s degree and/or relevant experience
• MBA would be preferred

Your Physical Work Environment Will Require…

Sitting, standing, stooping, bending, walking and other related tasks in an office and manufacturing setting. Must be able to do occasional lifting of up to 35 lbs. as regular daily activities necessitate. Exposure to a variety of weather conditions wind, rain, heat and cold along with the manufacturing environment’s noise, debris, and other task related hazards

Your Professional Experience Should Be…

5-8 years related experience including:
•   Managing large production facility of 100+ employees
•   Experience with highly engineered products & high volume work load
•   Automation of processes
•   Experience with developing and utilizing ERP system, and ability to pull data/reports
•   Familiar with Lean and Six Sigma techniques
•   Demonstrated ability to identify/execute continuous improvement activities
•   Demonstrated ability to effectively write and deliver business correspondence

Chart is an equal opportunity employer...

Need an Accommodation...

Project Controls Specialist (The Woodlands, TX, United States, 77381)

Ensuring Chart’s Success…

Chart Industries is looking for a Project Controls Specialist for our office in The Woodlands, TX. We are open to a hybrid schedule for this role. The successful candidate will perform planning/scheduling and cost control activities for our Chart Heat Transfer Systems Projects.

What Your Day-to-Day Activities Will Be…

Develop and maintain project schedules that are resource loaded and logically linked
Analyze schedules for improvement opportunities and resource effectiveness
Update project schedules weekly and publish monthly schedules for review and comment
Incorporate the manufacturing schedules in generating a forecast for project completion dates
Report project status, earned value, budget resource quantities and forecast to Project Managers and project team members
Assist in cost control and forecasting responsibilities
Maintain Change Management system and Sales & Operation Planning reporting

Your Education Should Be…

Bachelor degree in Engineering or other Technical Services Field
5-10 years planning/scheduling and cost control experience in an EPF / EPC environment
Minimum 3-5 years experience utilizing Primavera P6

Your Professional Experience Should Be…

Excellent communication skills, both written and oral.
Proficient with software including Primavera P6, MS Project, Excel, Word, Access, PowerPoint
Proficient with scheduling principles and methods including:
CPM scheduling techniques
Resource loading of schedules
Resource leveling and management techniques
Earned Value calculations
Risk Analysis and Forecasting
Work Flow Logic
Major Purchased item expediting and reporting
Excellent planning and organization skills
Ability to work in a team environment

Chart is an equal opportunity employer...

Need an Accommodation...

Field Service Expert (Frankenthal, Rheinland-Pfalz, Germany, 67227)

Ensuring Chart’s Success

Als Servicetechniker (m/w/d) übernehmen Sie die mechanische und elektrische Inbetriebnahme unserer Dampfturbinen sowie die Überprüfung von Sicherheitseinrichtungen. Dabei managen Sie Kundenprojekte weltweit vor Ort unter sicheren Arbeitsbedingungen.

Über Uns

Wir suchen Servicetechniker (m/w/d) für Dampfturbinen und Turboverdichter.

Weltweite Reisetätigkeit bis zu 100%

Ihre Aufgaben

Mechanische und elektrische Inbetriebnahme unserer Dampfturbinen inklusive Überprüfung der Sicherheitseinrichtung
Durchführung von Umbauten, Upgrades und Revisionen
Funktionsüberprüfung von Nebenaggregaten wie Schmierölpumpen, Motoren und Aktuatoren
Beratung von Kunden bezüglich Maschinenbedienung, Ersatzteilbevorratung und zukünftigen Wartungsmaßnahmen
Managen von Kundenprojekten weltweit vor Ort unter garantierten Randbedingungen der Arbeitssicherheit

Ihr Profil

Aus-/Weiterbildung:

Abgeschlossene Berufsausbildung zum/r Industriemechaniker/in, Mechatroniker/in oder Elektroniker/in (für Maschinen und Antriebstechnik) oder ein vergleichbarer Ausbildungsabschluss/ Qualifikation
Weiterbildung zum/r Techniker/in Maschinenbau oder Mechatronik wünschenswert, aber keine Voraussetzung

Erfahrung/ Kenntnisse:

Mehrjährige praktische Erfahrung in der Reparatur, Wartung und Inbetriebnahme von Dampfturbinen oder vergleichbaren Anlagen (z.B. Gasturbinen, Wasserturbinen, Windturbinen oder ORC-Anlagen)
Kenntnisse in Steuerungstechnik, Mechanik und Elektronik
Gute Deutsch- und gute Englischkenntnisse in Wort und Schrift

Reiseanteil/ Einsatzort:

Internationale Reisebereitschaft bis zu 100%
Bereitschaft, während der Einarbeitungszeit am Standort in Frankenthal zu sein
Wohnort innerhalb Deutschlands, bestenfalls in der Nähe eines internationalen Flughafens

Wir haben einige Kriterien zusammengestellt, die wir für diese Rolle als wichtig erachten. Wenn Sie überzeugt sind, dass Sie die Position erfolgreich ausüben können, freuen wir uns auf Ihre Bewerbung und sind gespannt, mehr über Sie zu erfahren.

Unsere Rahmenbedingungen & Benefits

Flexible und unterstützende Arbeitsumgebung

Flexible Arbeitszeiten bei einer 35-Stunden-Woche und 30 Tagen Urlaub im Kalenderjahr
Überstundenentlastungsmodell: Gesammelte Überstunden können an einem Stück freigenommen werden
Mobiles, bürounabhängiges Arbeiten in reisefreier Zeit
Travel Agent zur Unterstützung der Reisebuchung
Reisen werden in der Regel vom Wohnort aus gestartet (wenn keine spezielle Ausrüstung/ Werkzeug gebraucht wird)

Vergütung & Konditionen

Sehr gutes Vergütungspaket nach Qualifikationen und Erfahrungen im Metall- und Elektrotarif
Diverse Zuschläge (z.B. Nachtschicht, Sonntagsarbeit, Feiertagsarbeit, Überstunden)
Ein unbefristetes Beschäftigungsverhältnis

Einarbeitung und Weiterbildung

Sehr ausführliche Einarbeitung inklusive Begleitung durch einen erfahrenen Mentor – abgestimmt auf Ihren Erfahrungs- und Kenntnishintergrund - garantiert
Kontinuierliche Weiterbildungen und Schulungen

Chart setzt sich aktiv für Chancengleichheit ein

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche:

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Susanne Vong (susanne.vong@chartindustries.com) gern zur Verfügung.

Field Service Technician (Zuidland, Zuid Holland, Netherlands, 3214 VP)

The Big Picture:

We are now looking for a Field Service Technician to join our Field Service team and who will assist us in making a valuable difference in the century to come. We ensure that compressors continue to operate for years to come through maintenance plans, supply of OEM parts, service calls and equipment modifications to today's technology or changed operating conditions and repairs. The Technicians perform under supervision of the Senior Technician the installation, commissioning and start-up activities for new compressor systems, perform preventive and corrective maintenance on rotating equipment, particularly reciprocating compressors according with the customer’s set safety and quality requirements. In this dynamic position, you will be working on customer sites all in the EMEA-region.

What needs to be done?

•   Make the necessary preparation based on the scope of work and collect the required materials and tools to be fully prepared to prevent delays according to the instructions of the Senior Technician.
•   Perform all activities related to the service and repair or maintenance products taken on for service/repair under supervision of the Senior Technician.
•   Control of own performed work and corrects where needed.
•   Provide time lists and simple daily reports.
•   Provide simple trouble shooting activities and take direct action to cascade complex trouble shooting activities to the Senior Technician.
•   Reading of simple technical drawings.
•   Perform simple dimensioning activities.
•   Coaching junior technicians on the job.
•   Follows up on set quality and safety requirements. Observes and reports unsafe situations. Contributes to the improvement of own safety.

What do you need to bring?

•   Relevant technical background (MBO) and knowledge of rotating equipment.
•   Several years of experience as a Technician (Service Engineer).
•   Customer focus, flexibility and a pro-active and constructive attitude.
•   Problem solving skills.
•   Experience in making reports.
•   A good knowledge of maintenance concepts and process techniques.
•   Strong safety and quality minded, enjoys working both independently as well as within a team.
•   Willing to travel around 70% of the time and up to 9 weeks away from home and travel globally with sometimes a short notice period.
•   English language skills is an absolute must, Dutch language skills is preferred.

What will you get in return?

About Chart:

Need an Accommodation...

Plater (Renfrew, Scotland, United Kingdom, PA4 8XJ)

The Role…

Main Purpose of Job

To fabricate/assemble a varity of light to medium steel structures in accordance with engineering drawings.
All work to be of high quality standard

Who are we…

What will you do…

Fabricate/Assemble a variety of light to medium rotating and static equipment to drawings, work instructions and best practise
Tack weld as required
Operate metal working equipment (rolls/brake press etc.) as required to complete task
Ensure adherence to health and safety standards in compliance with company policy to ensure safe working environment.

What do you bring…

Essential skills, knowledge and behaviours

Time served with minimum 3 year’s experience in a fabrication/sheet metal environment.
Good communication skills
Read and interpret engineering drawings.

Desirable skills, knowledge and behaviours

Forklift licence
First aid training
Overhead crane experience

Chart is an equal opportunity employer...

Field Service Technician (Frankenthal, Rheinland-Pfalz, Germany, 67227)

Ensuring Chart’s Success

Als Servicetechniker (m/w/d) spielen Sie eine entscheidende Rolle für unseren Unternehmenserfolg. Sie sind das Gesicht unseres Unternehmens vor Ort bei unseren Kunden und stellen sicher, dass unsere Dampfturbinen reibungslos laufen.

In dieser vielseitigen Position sind Sie weltweit an unseren Anlagen im Einsatz und haben die Möglichkeit, Ihre Fähigkeiten in einem internationalen Umfeld unter Beweis zu stellen.

Über uns

Wir suchen Servicetechniker (m/w/d) für Dampfturbinen und Turboverdichter.

Weltweite Reisetätigkeit bis zu 100%

Ihre Aufgaben

Fehlersuche und die sich daraus ergebenden Maßnahmen zur Beseitigung gehören zu Ihren Aufgaben
Erstellung von Montageberichten inklusive der Dokumentation der finalen Maschinenparameter
Abschließend übergeben Sie die Maschine an den Kunden und führen ggf. eine Unterweisung durch

Ihr Profil

Aus-/Weiterbildung:

Abgeschlossene Berufsausbildung zum/ r Industriemechaniker/ in, Mechatroniker/ in, Elektroniker/ in für Maschinen und Antriebstechnik oder vergleichbare Ausbildung/ Qualifikationen

Erfahrung/ Kenntnisse:

Gute Deutsch- und Englischkenntnisse in Wort und Schrift
Eigenverantwortliche, selbständige Arbeitsweise, Interesse an interkultureller Arbeit, gute kommunikative Fähigkeiten

Reiseanteil/ Einsatzort:

Internationale Reisebereitschaft bis zu 100%
Wohnort innerhalb Deutschlands, bestenfalls in der Nähe eines internationalen Flughafens
Bereitschaft, die Einarbeitungsphase am Standort Frankenthal zu absolvieren

Unsere Rahmenbedingungen & Benefits

Flexible und unterstützende Arbeitsumgebung

Flexible Arbeitszeiten bei einer 35-Stunden-Woche und 30 Tagen Urlaub im Kalenderjahr
Überstundenentlastungsmodell: Gesammelte Überstunden können an einem Stück freigenommen werden
Mobiles, bürounabhängiges Arbeiten in reisefreier Zeit
Travel Agent zur Unterstützung der Reisebuchung
Reisen werden in der Regel vom Wohnort aus gestartet (wenn keine spezielle Ausrüstung/ Werkzeug gebraucht wird)

Vergütung & Konditionen

Sehr gutes Vergütungspaket nach Qualifikationen und Erfahrungen im Metall- und Elektrotarif
Diverse Zuschläge (z.B. Nachtschicht, Sonntagsarbeit, Feiertagsarbeit, Überstunden)
Ein unbefristetes Beschäftigungsverhältnis

Einarbeitung und Weiterbildung

Sehr ausführliche Einarbeitung inklusive Begleitung durch einen erfahrenen Mentor – abgestimmt auf Ihren Erfahrungs- und Kenntnishintergrund - garantiert
Kontinuierliche Weiterbildungen und Schulungen

Chart setzt sich aktiv für Chancengleichheit ein

Informationen zur Bewerbung

Der Bewerbungsprozess beinhaltet 3 Gespräche:

Erstes Kennenlernen (20-30 Minuten per MS Teams)
Fachgespräch (Max. 1 Stunde per MS Teams)
Persönliches Kennenlernen in Frankenthal

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Susanne Vong (susanne.vong@chartindustries.com) gern zur Verfügung.

AFM Sales Engineer (Seoul, N/A, South Korea, 05836)

Ensuring Chart’s Success…

Howden은 Chart Industries(NYSE: GTLS)의 계열사로 전세계 26개국 지사 약 6,000명이 근무하는 약 170년 연혁의 Gas & Air 이송 설비에 특화된 Global Engineering 회사이며, 전세계에서 생산되는 제품을 국내/외 공급하고 있으며, 주요 고객사는 EPC, 발전소 및 화공플랜트 입니다. 주요 제품으로는 대형 Fans (Axial & Centrifugal type), 보일러 및 환경 설비용 Rotary Heat Exchanger, 각 종 Compressors (Centrifugal, Screw, Diaphragm, Piston 및 Special type) 및 Turbine 등이 있습니다.

Web-site : https://www.chartindustries.com/Businesses-Brands/Howden

What Will You Do?

Main purpose of job

Responsible for sales and strategic development of the Howden Korea AFM(Aftermarket) business mainly in Power market (and plus PCOG (Petrochemical, Oil & Gas) & Industrial markets.)
Responsible in achieving annual AFM sales budget/target (bookings, revenue and margin) by preparing and negotiating quotes.
Responsible to support the HKR Country manager to analyse market demand and competition situation based on the company sales plans and develop new sales opportunities to promote the company's overall business development, ensure sales targets reached
Responsible to ensure prompt and accurate responses to customer for commercial and technical enquiries
Responsible to support project execution of legacy brands of Chart, Howden and CPI
Achieve the annual AFM contract bookings, sales and margin budget by:
- Proactively administering the AFM sales Bidding and Budgetary from enquiry through to customer order:
  - Evaluation of customer technical and commercial requirements to ensure correct supply of equipment
  - Ensure AFM quotations are processed within clients required timescales
  - Obtain / request necessary drawings if required in the quotation process
  - Keep CRM up-to-date and maintain the data as accurate as possible
  - Liaise with customers to negotiate initial contract terms and conditions
  - Make sure customer order reflects the agreed terms in Howden’s quote
- Developing sound relationships with customers and suppliers
Customer communication
- Updating customer contact list in CRM and in the ERP system
- Confirming customers product and maintenance details
- Pro-active communication of AFM requirements and special campaigns
- Follow up open opportunities as required
Administrative diligence – accurately and efficiently in a timely manner prepare required documents and seek to continuously improve office procedures
Liaise with PBU (Product Business Units) in order to start transferring PBUs knowledge and being a backup instead of PBU sales or technical team in local.
Embrace Customer Relationship Management (CRM) and apply the use of the core company values

Your Physical Work Environment Will Require…

Your work location will be at Seoul/Ulsan.

Your Experience Should Be...

Minimum of 3-5 years experience in the Power Generation Industry.
Understanding of Fans & Heaters in Power plant and process application for Power Generation preferred. Also, other rotating equipment (Compressors, Blowers & Steam turbines) knowledge in PCOG & Industrial markets is plus.
Engineering Degree in relevant field preferred
TOEIC grade 800 up, excellent written and verbal communication skills in English
Excellent communication skills (written and verbal): must be able to interact and communicate effectively with individuals at all levels of the organization with tact and diplomacy with a high level of cultural sensitivity
Ability to interpret financial data and perform accurate pricing calculations (pricing, margins, exchange rate)
Experience working on ERP system (Ecount and preferably Microsoft AX)
Ability to handle multiple priorities simultaneously in a fast-paced environment, set priorities, and work both independently and in a team environment
Ability to work under pressure while keeping a positive and result- driven attitude
High level of PC literacy, especially MS Excel, Outlook, Internet Explorer

Our Benefits Package...

Howden provides a great benefits package in addition to an attractive salary. It also provides the chance to work in an exciting, fast-paced environment for a global engineering company.

Seal Welder - W/E shift (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Grow a Cooler career with Chart Industries! This position is Friday through Sunday, with ability to pick up other shifts during the week, if desired. Day shift and Night shift availability. Chart Industries in Beasley, TX is looking for experienced welders. Must be willing to work overtime and pass 2 weld tests - a 6G Tig test on carbon steel 2” pipe and a 2G weld test. Chart’s experienced welders play a key role in the manufacturing process of producing Air Cooled Heat Exchangers.

What Your Day-to-Day Activities Will Be…

Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques
Ability to lay-out, burn holes, fit and weld nozzles
Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process
Inspects completed welds to determine structural soundness
Performs a variety of tasks
Promotes and supports safety and production
Makes quality visual U.T. and x-ray welds

Your Education Should Be…

High school diploma or its equivalent required

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

Must be able to work inside and outside

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS

Safety Glasses
Steel Toe Shoes
Ear Plugs
Gloves
Hard Hats
Face Shield (when needed)

PHYSICAL REQUIREMENTS:

Walking
Standing
Using hands
Bending
Lifting
Sitting

Your Professional Experience Should Be…

Minimum Experience:

1-3 years related experience

Skills Required (i.e. certifications, licenses, registrations, etc.):

May be required to complete an apprenticeship and/or formal training in area of specialty

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Ability to read and interpret shop drawings
Ability to operate overhead-crane
Familiarity with welding machines and hand tools
Knowledge of standard concepts, practices, and procedures within a particular field
Ability to rely on experience and judgment to plan and accomplish goals
Ability to work under general supervision
Ability to work different shifts
Ability to pass 6G Tig test on carbon steel 2” pipe
Ability and willingness to learn to operate basic cutting equipment
Ability to lift
Possesses positive attitude

Chart is an equal opportunity employer...

Need an Accommodation...

Field Service Engineer (Jakarta, Java, Indonesia, NA)

Ensuring Chart’s Success…

What Will You Do?

Accountabilities

Servicing
1. Undertake servicing in terms of customer planned maintenance contracts
2. Prepare detail planning and schedule
3. Disassemble and check equipment: Reciprocating compressor, Screw Compressor and Fan
4. Carry out required maintenance checks and repair activities
5. Assemble and test run compressor equipment
6. Put the equipment back in operation
7. Produce daily and project reports of work done in order to comply with the Service Level Agreement to Manage daily communication and management with clients

Installation and Commissioning of New Compressor Installations
1. Supervise the installation, commissioning and start-up of big heavy duty compressor equipment and lead a group of technicians at site.
2. Prepare planning schedules, update them periodically and have periodical progress meetings with customer representatives.
3. Prepare and communicate daily/weekly reports including measurements sheets and complete and comprehensive project report at the end of the I&C project.
4. Ensure the machine is ready for full production service.

Site/Project Management
1. Manage contract staff, liaise with client representative/s, budget management, maintain schedules including progress reports, QHSE management, quality control management, equipment management and accommodation management to ensure acceptable results for Howden and the Clients.

Troubleshooting
1. Carry out detailed machinery analysis, interpret results and liaise with Howden engineering department on how to most efficiently resolve customer problems.

5. Legal, Health and Safety

1. Take all reasonable care for own personal health and safety, as well as for that of everyone who may be affected by your action in your workplace.
2. Liaise and co-operate with company management with regards to the current health and safety legislation and obligations within the location and area where you performing your duties

Your Physical Work Environment Will Require…

Your work location will be in Indonesia, Jakarta.

Your Experience Should Be...

Essential skills, knowledge & behaviours

Technical higher professional education program, for example Diploma (Mechanical or Marine Engineering).
At least 3 to 5 years’ experience in mechanical work.
Ability to use Microsoft Apps for reporting purpose.
Good general knowledge of maintenance concepts of compressor and fan components.
Reporting should be of a good standard and written/spoken English should be of a high standard.
Good Inter-personal skill to communicate with clients and co-workers.
Enjoys working independently ,but must also be able to work comfortably as part of a team.
Good spoken and written communication skills.
Customer-orientation with a commercial attitude, sense of responsibility, inner drive, tact.
Ability to cope with stress.
Capacity to think analytically.

Desirable skills, knowledge & behaviours

Proactive to solve site issue and complexity.
Flexible attitude and a creative, practical approach.
Formal training in OHSE practices.

Complexity and creativity

Field service activities are complex due to changing requirement on site.
Turnkey project may have varies in scope of supply.

Judgement and decisions

Technical/mechanical solutions – basic understanding to judge the cost impact and problem.
Good understanding of how equipment works
Able to perform hands-on work

Our Benefits Package...

Howden provides a great benefits package in addition to an attractive salary. It also provides the chance to work in an exciting, fast-paced environment for a global engineering company.

Manual Machinist II (Los Angeles, CA, United States, 90220)

Ensuring Chart’s Success…

Chart/Howden is a global engineering business who focuses on providing clients with industrial products that help multiple sectors improve their everyday processes. Chart’s core focus is on providing quality solutions for air and gas handling, and have over a century of experience in doing so. We are currently seeking a Manual Machinist II in the US to join our dynamic and fast-paced environment in the Aftermarket CPI business. In this role you will be responsible for working on compressor repair parts.

What Will You Do?

Must be self-motivated and open minded to lean our machining and safety procedures
Efficiently, carefully, and accurately sets-up and operates manual mills and lathes and has lengthy experience using a horizontal boring mill on a wide variety of diversified work
Lays out work and produce quality parts
Deciphers sketches, blueprints, and engineering details
Provides assistance in establishing set up and layout methods, order of operations, and application of required parts and materials
Carries a job through from raw materials to the finished products from drawings, sketches, samples or verbal instruction.
Sharpens, reworks, resets and repairs cutting tools
Inspects and checks parts being produced
Maintains accurate production records and job history
Performs minor machine maintenance activities. Assists in setting up complex machines and stacking, marking, packing and transporting of finished products. Works at different work stations as per production requirements.
Keeps a clean and orderly work area
Performs any other assigned duty as directed by management.
Some local travel may be required

Your Physical Work Environment Will Require…

While performing the duties of this job, the employee is regularly required to:

Be able to use hands to handle objects, tools, or controls
Be able to reach overhead
Be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time
Be able to lift, pull and push materials and equipment to complete assigned job tasks
Be able to lift and/or move up to 50 pounds of weight frequently throughout assigned workday

Your Experience Should Be...

Role requires 2 to 3 years of experience
3+ years of machining experience preferred
Has an extensive knowledge of machine uses and manufacturing materials
Has an advanced knowledge of shop mathematics
Reciprocating Compressor experience a definite plus- but not required

Our Benefits Package...

Fabricator (La Crosse, WI, United States, 54601)

Ensuring Chart’s Success…

“Cooler Together” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so that’s how we got our “Cooler By Design®” tagline. Of course, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers and strive to work together as a team, making us “Cooler Together”. With our recent acquisition of Howden, we’re also “Stronger Together”. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too. Interested to learn more? Take a tour of Chart City (https://chartcity.chartindustries.com/) to get a feel of how Chart equipment solutions impact our daily lives. Chart is looking for bright, talented candidates that have a desire for a career in an exciting and evolving industry. This could be you!

Starting wages at $23.31 per hour with a $5.00 premium on second shift and $7.50 premium on third shift! The Press Operator and Fabrication job offers employees job flexibility and variety. Eight different functions make up the Fabricator job. These functions are:

Saw fins
Bar cutting
Inspect sheets
Check and clean fins
Clean and straighten bars
Debur fins
Fabricate fins
X/Y table

Employees in this role will have the opportunity to be trained on all 8 job functions.

Common Machines and Equipment

Band saw
Electrical deburring wheel
Tape measure
Hand and adjustable protractors
Crescent and Allen wrenches
Clamps and aluminum angles
Files
Overhead hoists/belts
Shears
Hand & power trucks
Micrometer

Knowledge, Skills, and Abilities Required

The incumbent must have sufficient knowledge and ability to:

High school diploma (or GED) Required.
Use measuring devices which also include tools to measure degrees and angles
Do repetitious work
Hand dexterity is required to perform many job functions
Willingness to proficiently learn to use all tools necessary to each job function
Work with and read drawings and instructions
Perform simple mathematical functions

* Sponsorship is not offered for this role.

Your Physical Work Environment Will Require…

Our Benefits Package...

Our Benefits | Chart Industries

Electrical Assembler (Duluth, GA, United States, 30096)

Ensuring Chart’s Success…

Chart Water, a Chart Industries Company is seeking an Electrical Assembler position at our Duluth GA location

What Will You Do?

- Integrate industrial control panel, electronic, pneumatic, and hydraulic components for automated water treatment equipment and pump controls.

- Assemble parts and tools and fits electronic components together.

- Inspect wiring installations, assembilies and circuits.

- Verifies dimensions and clearance of parts to ensure working correctly.

- Test functional performance to ensure wiring is operational.

- Other duties, as assigned.

Your Physical Work Environment Will Require…

- Frequently required to use hands to finger, handle, or feel objects, tools or controls and climb or balance.

- Occasionally required to walk; reach with hands and arms; kneel, crouch or crawl; hear and talk.

- Regularly life and move up to 10 pounds, frequently lift and move up to 25 pounds and lift and move up to 50 pounds.

- Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus.

Your Experience Should Be...

High School Diploma or GED.
Technical School, a plus

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Project Manager (La Crosse, WI, United States, 54601)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart Industries is looking for a Project Manager for our office in La Crosse, WI. This would be an onsite role. The Project Manager will be responsible for all stages of the job from initiation of the contract to job close. The Project Manager oversees the engineering, design and fabrication of awarded contracts.

What Will You Do?

Responsible for all commercial and administrative requirements of Projects
Direct and coordinate activities of project personnel to ensure that the project progresses on schedule andwithin the budget
Lead the project team and all necessary technical disciplines throughout the project’s design, fabrication andas required installation
Ability to follow all company procedures with regards to project reporting and client interface including:
Financial/Operations Reviews, Project Planning, Procurement Planning, Budgeting, Staffing and QualityManagement
Work with Project Controls and Quality groups as required to support project and departmental requirements
Assist with proposal development and review prior to contract award
Provide technical assistance and problem resolution
Coordinate project activities in order to comply with all design codes, safety regulations, government andregulatory agencies
Review and apply project specifications to engineering, design and fabrication efforts
Review, understand and interpret Customer specifications and contract requirements
Manage Customer and internal documents through the Document Management System
Coordinate material/purchasing requirements, develop requisitions and approve vendor selections
Responsible for cost control, cost forecasting, planning/scheduling, change management, and reporting onprojects

Your Education Should Be...

B.S. with M.S. or M.A.
5 years hands on project management experience
Equivalent combination of education and experience

Your Professional Experience should be…

Ability to manage multiple parallel projects.

Excellent computer skills including MS Word, Excel, Access, Power Point, Primavera P6 and other project management programs
Excellent verbal and written communication skills, analytical and problem solving skills
Ability to work with minimal supervision
Ability to work and succeed in a team environment
Experience working in an environment where responsibility and accountability was expected
Proven leadership, management, supervisory and organizational skills
Excellent customer service skills
Conflict resolution skills
Experience working with Industry Standard Codes (ASME, B31, AISC, ASTM, AWS, OSHA)and or international equivalents
Industrial Fabrication or Construction experience
Understanding of Engineering disciplines
Cryogenic gas processing including natural gas and hydrogen liquefaction, and separation and rejection facilities.

Our Benefits Package...

Our Benefits | Chart Industries

Process Engineer (Orem, UT, United States, 84057)

Ensuring Chart’s Success…

We are looking to add a Process Engineer to our team in Orem, UT. The Process Engineer begins to take direct engineering responsibility for the conceptual design of Chart process technologies to meet customer requirements. This person must work well within a small team environment while preparing process information deliverables for the basic engineering design package. This position requires someone who is comfortable operating autonomously with open-ended tasks. You will have the opportunity to interact with every part of the technology development from design of new and novel equipment and experiments to detailed large-scale equipment design, sourcing, and operation. It is intellectually engaging work on complex, unique, and novel problems.

What Your Day-to-Day Activities Will Be…

Support process development for the innovative Cryogenic Carbon Capture™ technology through Aspen Plus, Aspen HYSYS, and Aspen EDR
Simulate steady-state and transient/dynamic processes to describe performance and generate heat and material balances
Work with clients and other engineers to develop feasibility, preFEED, and FEED studies to design Cryogenic Carbon Capture plants
Prepare process equipment data sheets and equipment lists
Prepare Process Flow Diagrams
Assist in the development of Piping and Instrumentation Diagrams
Assist in the development of wiring and loop drawings and control system architectural drawings for internal research and development work
Provide process data to mechanical engineering counterparts and key vendors for equipment sourcing
Check process engineering work performed by other Process and Process I Engineers
Assist in the preparation of Start-up and Operating Manuals
Participate in experimental work and prototype operation
Some travel – 10% or less
Develop and implement industrial-grade process control, including model predictive controls and human-machine interfaces, for highly integrated prototype and commercial processes (optional, but preferred)

Your Education Should Be…

Bachelor’s in Chemical Engineering or Process Engineering is required
Master’s Degree in Chemical Engineering preferred

Your Professional Experience Should Be…

Working knowledge of ASPEN Plus/HYSYS and/or similar process simulation software, including dynamics simulation
Knowledge of chemical engineering first principles, especially thermodynamics and heat/mass transfer and ability to apply those principles to real-world systems
Proven teamwork skills
Sound organizational skills for completing tasks as scheduled
Strong communication skills both verbal and written for the purpose of explaining challenges and solutions internally, and presenting externally
Good interpersonal skills to successfully interface other engineering disciplines and customers

We prefer candidates that also have the following:

2 to 5 years of process engineering experience (or educational equivalent)
Computer programming expertise in one or several of C++, C#, Java/JavaScript, or Python
Knowledge of cryogenic process technologies which can include cryogenic air separation, natural gas liquefaction, hydrogen liquefaction, helium processing and liquefaction, etc.
Knowledgeable in natural gas processing technologies
Some experience and interest in control system and human machine interface software
Understands basic applicable engineering/electrical/safety codes

Your Physical Work Environment Will Require…

Chart is an equal opportunity employer...

Need an Accommodation...

Inženýr konstruktér (Decin, Ústí nad Labem, Česká republika, 405 30)

Pro koho budete pracovat?

Jsme součástí skupiny Chart, která patří k lídrům v oblasti výroby a prodeje zařízení na skladování a distribuci zkapalněných plynů. Jsme také velmi aktivní při vývoji a výrobě zařízení zaměřených na rozvoj čistých energií jako je vodík a LNG.

Co u nás budete mít na starosti?

kompletní zpracování výrobní konstrukční dokumentace zakázek zadaného rozsahu při dodržení technických, technologických, bezpečnostních a ekonomických parametrů, které jsou stanoveny výrobním příkazem, technickými normami a specifikacemi
zodpovědnost za splnění všech požadavků zadaných zakázek a projektů (dodržení termínu, rozpočtu a kvality)
kontrola konstrukční dokumentace
vypracování technických popisů výrobků a podkladů k testování výrobků
zpracování podkladů pro technické podmínky provozu výrobků
dodržování stanovených termínů, avizování možných zpoždění a rizik

Co byste měl splňovat?

SŠ/VŠ se zaměřením na strojírenství
znalost konstrukčních dovedností
zkušenost na obdobné pozici výhodou
uživatelská znalost práce na PC včetně systému CAD (preferován SolidWorks)
angličtina na středně pokročilé úrovni
flexibilita, samostatnost, přesnost
svědomitost a schopnost přijmout zodpovědnost

Co Vám můžeme nabídnout?

zajímavé a perspektivní zaměstnání ve stále se rozvíjející nadnárodní společnosti
finanční ohodnocení odpovídající znalostem a praxi
flexibilní pracovní dobu a možnost práce z domova
příspěvek na volnočasové aktivity ve formě Cafeterie, příspěvek na penzijní připojištění
5 týdnů dovolené
možnost závodního stravování včetně příspěvku na stravování
zvýhodněné telefonní tarify i pro rodinné příslušníky
podpora osobního rozvoje a široký program firemního vzdělávání

Quality Engineer (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

The Quality Engineer reports to the Quality Manager and assists the quality department team in supporting the Quality, Health, Safety, and Environmental (QHSE) policy.

What Will You Do?

Maintaining the nonconformance and CAPA program.
Coordinating the performance and completion of required employee training, through the utilization of Chart’s Master Control program, to develop and improve employee proficiency.
Coordinating and perform equipment validations in preparation for use in production.
Ensuring inspection, measuring, and test equipment (IMTE) used at the Chart Tulsa facility is calibrated and maintained current.
Designs, installs, and evaluates quality process sampling systems, procedures, and statistical techniques.
Assists in the formulation of quality procedures and plans, and recommends revision of specifications when indicated.
Interfaces with engineering and production components within the company, and with customers and suppliers on quality-related issues.
Develop inspection methods to analyze product quality
Improve product quality by making recommendations for change
Work together with relevant teams and departments to improve products
Ensure products adhere to company and industry quality standards
Brainstorm ideas to create solutions for identiﬁed problems
Formulate a strategic plan to increase productivity in the business
Document results and ﬁndings after inspections are carried out
Implement a working system to ensure conformity and accuracy in the production process

Your Physical Work Environment Will Require…

Manufacturing Plant Environment - required PPE as necessary
The ability to lift 25 lbs.
Stooping, kneeling, crouching, reaching, standing, walking, lifting, fingering, grasping, feeling, talking, hearing, repetitive motion, and other movement as necessary

Your Experience Should Be...

5 years of prior relevant experience

Experience in welding industry, such as AWS and/or ASME,
Professional certification through American Society for Quality (ASQ), such as CQE (Certified Quality Engineer) and/or CQA (Certified Quality Auditor)
Experience in Auditing
Experience in ISO 9001, ISO 14001and ISO 45001 management systems
BS in Engineering, Physical Science, or other relevant technical field

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Chargé d'études et cotations rechanges H/F (Chalon-sur-Saône, N/A, France, 71530)

Ensuring Chart’s Success…

Vue d’ensemble

Chart Industries est un fabricant mondial d’équipements et de solutions hautement techniques pour les marchés de l’énergie, de l’industrie et des gaz industriels (11200 pers, 40 pays).

Filiale de Chart Industries, notre société, Howden Solyvent-Ventec est un acteur de premier plan, spécialisé dans la conception, la fabrication et la commercialisation de ventilateurs industriels.

Dans le cadre d’un remplacement, nous recrutons un Chargé d’études et cotations rechanges H/F pour notre établissement secondaire composé de 30 personnes et basé à Fragnes (proche Chalon sur Saône).

What Your Day-to-Day Activities Will Be…

Principales Missions / Activités :

Rattaché au Responsable Chiffrages et back offices, votre rôle est d’analyser les besoins clients, vérifier la conformité des produits demandés et élaborer un chiffrage optimal selon les règles en vigueur.

A ce titre, les principales missions sont :
•   Analyser les appels d’offres clients et entités Howden/Chart.
•   Vérifier la conformité des produits demandés.
•   Elaborer le chiffrage optimal selon les règles en vigueur.
•   Transmettre les chiffrages finalisés aux commerciaux.
•   Apporter un support et une assistance technique à la force commerciale, aux entités Howden/Chart et aux différents services d’exécution.
•   Participer aux revues de contrats.
•   Prendre en compte, respecter et faire respecter les règles santé, sécurité et environnement.

Your Education Should Be…

Niveau de formation et/ou expérience :

Titulaire d’une formation bac+2/3 dans le domaine technique, vous justifiez d’une expérience professionnelle de 3 ans dans une fonction similaire dans le secteur industriel.

Vous maîtrisez impérativement un anglais commercial ainsi que les outils informatiques. La connaissance d’un ERP est un plus.

Proactivité, organisation, rigueur, sens du service, adaptabilité, disponibilité, autonomie, bon relationnel sont des atouts indispensables pour réussir dans cette fonction.

Les avantages :
- Carte Tickets restaurant
- 37H avec 13 RTT
- Possibilité de télétravail jusqu’à 2 jours par semaine en accord avec le manager

Your Physical Work Environment Will Require…

Your Professional Experience Should Be…

Chart is an equal opportunity employer...

Need an Accommodation...

Mig/Tig Welder- Aluminum - 2nd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart’s Tig Welder 2nd shift (5pm - 3:30am) position plays a key role in the manufacturing process of Chart’s products. This position will be responsible for welding vessels of various types of metals using GTAW. Chart produces high quality manufactured products using radiography, vacuum mass spectrometry, and phased array ultrasonic testing. Chart complies with ASME, DOT, AAR, and EN pressure vessel codes.

What Your Day-to-Day Activities Will Be…

Operation of cranes, forklifts, and aerial lifts
Welding of vessels through established manufacturing processes with minimum instruction and minimum supervision
Perform complete welding and finishing operations for the repair of units.
Accurately maintain required records (production traveler, material traceability, and production records).
Maintain cleanliness of assigned work area
Monitor equipment functionality and report maintenance needs
Assist other new welders in learning welding skills
Complete and follow all safety procedures and policies
Complete company provided training to effectively perform required job responsibilities
Other work as assigned

Your Education Should Be…

High School diploma or GED
Completion of a Welder Training Program
Proficient in all positions with GTAW
Proficient in knowledge of blueprint reading and welding symbols
Proficient in welding best practices
Proficient in visual inspection

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling
Frequent pushing, pulling and handling of material
Occasional climbing and working at elevated positions
Repetitive hand movements during welding operations

Your Professional Experience Should Be…

Must complete and pass welding test

Tig welding: Your weld test will consist of 2G aluminum plate test with backing GTAW. Additional testing in the 2G, 3G, and 6G for qualifications upon being hired. First week will be in the testing lab to finish qualifications.

Ability to:
- Adhere to Company Standards and Values
- Meet expectations for attendance and performance
- Meet deadlines for assignments
- Interact personably with co-workers and associates

Chart is an equal opportunity employer...

Inženýr konstruktér (Decin, Ústí nad Labem, Czech Republic, 405 30)

Pro koho budete pracovat?

Co u nás budete mít na starosti?

kompletní zpracování výrobní konstrukční dokumentace zakázek zadaného rozsahu při dodržení technických, technologických, bezpečnostních a ekonomických parametrů, které jsou stanoveny výrobním příkazem, technickými normami a specifikacemi
zodpovědnost za splnění všech požadavků zadaných zakázek a projektů (dodržení termínu, rozpočtu a kvality)
kontrola konstrukční dokumentace
vypracování technických popisů výrobků a podkladů k testování výrobků
zpracování podkladů pro technické podmínky provozu výrobků
dodržování stanovených termínů, avizování možných zpoždění a rizik

Co byste měl/a splňovat?

SŠ/VŠ se zaměřením na strojírenství
znalost konstrukčních dovedností
zkušenost na obdobné pozici výhodou
uživatelská znalost práce na PC včetně systému CAD (preferován SolidWorks)
angličtina na středně pokročilé úrovni
flexibilita, samostatnost, přesnost
svědomitost a schopnost přijmout zodpovědnost

Co Vám můžeme nabídnout?

zajímavé a perspektivní zaměstnání ve stále se rozvíjející nadnárodní společnosti
finanční ohodnocení odpovídající znalostem a praxi
flexibilní pracovní dobu a možnost práce z domova
příspěvek na volnočasové aktivity ve formě Cafeterie, příspěvek na penzijní připojištění
5 týdnů dovolené
možnost závodního stravování včetně příspěvku na stravování
zvýhodněné telefonní tarify i pro rodinné příslušníky
podpora osobního rozvoje a široký program firemního vzdělávání

Application Engineer (Zuidland, Zuid Holland, Netherlands, 3214 VP)

The Big Picture

Howden CPI Netherlands B.V. part of Chart Industries is a leading provider of aftermarket components and services to the global reciprocating compressor market. Throughout the world, our customers count on us for service and solutions that keep their compressors, lubrication systems and business running. With our thorough knowledge of compressor operation and extensive field experience gained from years of collaboration with compressor manufacturers and users, we are proud to help drive growth in the markets we serve and to enable our customers’ success!

We are now looking for a Application Engineer to join our engineering team and who will assist us in making a valuable difference in the century to come. We ensure that compressors continue to operate for years to come through maintenance plans, supply of OEM parts, service calls and equipment modifications to today's technology or changed operating conditions and repairs. The position is responsible for for the technical aspects of HTC compressor solutions by assessing customer needs by combining appropriate products and services. May visit clients to present the company's products/services. Has working technical knowledge of all phases of the activity. The role will be based in Zuidland (ZH) in the Netherlands and reporting in to the Manager Engineering.

What Will You Do?

Discussing and translating customer requirements into technical solutions with a customer-focused mindset.
Studying customers RFQ’s.
Being in contact with customers on technical requirements.
Co-creating design concepts for the renewable hydrogen market, together with consultants and/or suppliers of complementary technology and equipment solutions.
Preparing the scope of technical proposal documents.
Assist during technical training of local CHART business units.

What do you need to bring?

Relevant technical education (Bachelor’s degree in Mechanical Engineering or similar).
Technical and commercial knowledge of the various components and phases of the solution design.
A continuous learning mindset about new Customer needs and market trends.
Excellent interpersonal skills, including an open and engaging communication style.
Ability to lead internal and external meetings.
Team player, responsible, flexible and a self-starter.
A technical-commercial Interest in a broad range of disciplines (rotating, mechanical, systems and processes).
Good at setting priorities and has strong time management skills.
Fluency in English.
Dutch language skills.

What will you get in return?

Interested or do you have any questions?

Are you interested? then you can easily apply with us in a few clicks. Do you have any questions? Then you can contact us with any questions on aico.peek@chartindustries.com.

Tool & Die Maker II (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives

What Your Day-to-Day Activities Will Be…

Maintain inventory of tools and materials for operation of Tool Room.
Inspection of tools, dies and fixtures that are made by outside vendors.
Keep records of all dies.
Make tool reports of finished tools.
Coordinate work between tool maker and die form grinders.
Work with Engineering to understand tooling concepts, requirements, layout, anticipated problems, and tool build load forecast.
Support Maintenance when needed.
Maintain and overhaul fin presses.
Build, sharpen and troubleshoot fin dies.
Assist Engineers in estimating time and materials of jobs.
Coordinate heat treat process.
Develop and troubleshoot new tooling and make revisions if needed.
If required, prepare tool sketches.
Set up and operate precision tools.

Your Education Should Be…

Person should have or should qualify for a five-year state indentured apprenticeship or equivalent.
Person should have background in mathematics, mechanical drawing, metallurgy and machine shop practices.

Your Physical Work Environment Will Require…

Working conditions may vary from a temperature controlled, isolated environment to areas which are cramped, greasy and poorly lit. Exposed to sharp edges, high speed cutting tools and oil. Standing, reaching, bending and lifting 0 to 50 lbs. When lifting over 50 lbs., two people are required.
The employee who performs this job has responsibility to maintain proper housekeeping in the work area and keep machines in good operating condition. Is also responsible for safety and quality workmanship and procedures.
The above statements are intended to describe the general nature and level of work performed by individuals assigned to this classification. It is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so assigned.

Your Professional Experience Should Be…

Ability to program CNC equipment using ‘G’ and ‘M’ code format
Ability to read prints and interpret machining requirements.
Ability to maintain machining tolerances of ±.0002.
Ability to square up fixturing on table to .0000 over a length of 36".
Ability to identify different shapes of truing diamonds and the working condition of the diamond.
Must be able to adjust tooling and equipment to tolerance of .000 to .0000.
Ability to identify, monitor and compensate for machine expansion changes.
Ability to stone and hone a sharp radius on tool steel.
Must be able to communicate at all levels from shop floor operator to engineer.

Machines and Equipment

* Fin Forming Presses

* Automatic Surface Grinder

* CNC Form Grinder

* Manual Lathe

* Manual Knee Mill

* Vertical Machining Center

* Vertical and Horizontal Band Saws

* Wire EDM

* Drill Presses

* Precision Measuring Tools

Chart is an equal opportunity employer...

Need an Accommodation...

Welder, 2nd Shift (Canton, GA, United States, 30107)

What Will You Do?

Perform pipe welding activities, including hand welding and material handling equipment
Determines type and gauge of steel to be welded making appropriate adjustments, as required, on large thickness variations
Use blueprints and design sketches
Ensure proper dimensions and tolerance levels, correct components installed on the finished product
Update/maintain required documentation
Maintain a clean work area, care for assigned tools, and proper disposal of hazardous waste
Understand and practice established safety and quality standard procedures
Perform tasks to ISO standards and requirements
May be required to perform mass spec and visual inspections
Other duties and responsibilities assigned by management
Shift hours are 3:45pm to 2:15am, Monday through Thursday

Your Physical Work Environment Will Require…

While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to climb or balance. Must be able to regularly lift and/or move up to 25 pounds, occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this role, including close vision. color evaluations and the ability to adjust to focus.

While performing the duties of this job, the employee regularly works near moving mechanical parts and is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, and vibration. Medium to loud noise level in the work environment

Your Experience Should Be...

Must have TIG welding experience
Must pass 3G vertical weld test
Experience interpreting blueprints and bill of materials (BOM)
Basic math skills (weight measurement, volume, distance, multiplication, and division)
Attention to detail essential
Self-starter capable of managing workload under minimal direction and supervision
This role requires the ability to identify, reason and problem solve minor non-conformities and deviations
Must be available to work overtime, and weekend hours, if needed.

Our Benefits Package...

Mold Operator - WE Shift (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

What Will You Do?

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

Operates any one of various machines in order to perform a certain process to the material
Sets up and operates a production machine in accordance with established procedures and guidelines
Adjusts machine settings to complete tasks accurately, according to specifications, and in a timely fashion
Reads and interprets blueprints and diagrams to select, position and secure machinery
Performs a variety of complicated tasks

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Knowledge of a variety of the field’s concepts, practices, and procedures
Ability to rely on experience and judgment to plan and accomplish goals
Ability to work under general supervision
Primary job functions do not typically require exercising independent judgment
Ability to complete formal training in area of specialty
Ability to handle all 9 mold stations
Wide degree of creativity and latitude

Your Physical Work Environment Will Require…

INTERACTION:

Works with leaderman/supervisor

WORKING CONDITIONS:

Must be able to work inside
REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS
Safety Glasses
Steel Toe Shoes
Ear Plugs
Gloves (when needed)
Air Supplied Hood
Tyvek Coveralls (optional)
Sports Belt (optional)

PHYSICAL REQUIREMENTS:

Walking
Standing
Using hands
Bending
Lifting

Your Experience Should Be...

6 months or more in an Industrial/Manufacturing Environment
Experience working with fiberglass
High School Education or GED preferred

Our Benefits Package...

System Engineer (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for a System Engineer, who will join our Engineering team and will support in making a valuable difference in the century to come.

The System Engineer will be responsible for the monitoring of the technical implementation of a project for the optimal implementation and delivery of a compressor installation plus systems in accordance with Howden Thomassen Compressors standards and specifically agreed customer requirements. Moreover the System Engineer will be implementing structural improvements within engineering.

What will you do?

The position is project responsible for the technical execution of customer projects. The activities consist of recording technical order specifications, creating and processing documents in which the technical implementation of the project is recorded.
The position is responsible for maintaining internal company standards to:
The function serves as a source of information and information point for the organization in the field of process gas products, engines/electrical, instrumentation, control/control systems and mechanical engineering (all disciplines that are part of a project).
The position also provides support for quotation work for the above points.
In addition to participating in customer projects, impact on business results through improvement projects and continuous improvemen
Drawing up documents (drawings and specifications) of non-standard products in a compressor installation on the basis of received data (customer specifications, (inter-)national legislation and design codes) for the purpose of purchasing products.
Provides input for the customer's position to the lead engineer and executes the result.
Consults with suppliers about the requirements for product execution and the required quality.
Ensures that the appropriate required documentation is received from suppliers and that these documents also contain the required information.
Discusses uncertainties and common problems with the lead engineer.
Ensure that the correct qualitative and quantitative engineering input is maintained to the project team.
Can be appointed as coordinating engineer if several system engineers are working on one project. This includes activities such as coordinating, dividing and organizing the activities for the team system engineers (±2 engineers).
Represent the system engineering team in the progress meetings and TaskForce consultation
Initiating internal improvement and standardization projects.

What do you need to bring?

Relevant technical education (Bachelor degree).
Basic knowledge of and interest in process gas/fluid handling equipment, instrumentation and drive systems.
Preferably knowledge of reciprocating compressors in our business.
Preferably experienced with drivers motors.
Be able to read drawings / P&ID and other specifications.
Team player, analytic thinker and a self-starter.
Ability to multi-task and prioritize while maintaining a customer focus.
Fluency in English

What will you get in return?

About us

Buyer (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

•   Experience in developing supply chain management strategies required
•   Creative thinker with strong analytical skills required
•   Good negotiation skills required
•   Strong understanding of contracts, contract requirements, and contract management required
•   Systems skills (procurement related) required
•   Solid interpersonal skills and strong communicator required
•   Knowledge of steel/metal production process and markets preferred
•   Understanding of international business and international sourcing process preferred
•   Cross disciplinary experience is highly valued and preferred
•   Bilingual (English/Spanish) is strongly preferred
•   Knowledge of commonly-used concepts, practices, and procedures
•   Ability to rely on instructions and pre-established guidelines to perform the functions of the job
•   Ability to work independently making sound and reasonable judgments
•   Ability to work within group and cross functional environment
•   Ability to work under immediate supervision
•   Primary job functions may typically require exercising independent judgment
•   Knowledge of JD Edwards or similar ERP system

What Will You Do?

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

•   Contribute in developing and implementing global supply chain management strategies
•   Initiate RFQ after obtaining required approvals or MRP demands
•   Identify and Develop vendors
•   Maintain an accurate recordkeeping system and provide reports on various phases of activities
•   Regularly communicate material issues that may impact Customer due dates with Customer Service, Project Managers and other team members.
•   Monitor and manage stock materials/inventory
•   Regularly attend team meetings to discuss project and order status and to identify and resolve issues that may impact the customer.
•   Drive and implement recommendations enabling continuous improvement and cost reduction opportunities
•   Manage the supplier relationship:
o   Monitor performance
o   Ensure proper invoicing
o   Issue purchase orders, including revisions, and ensure fulfillment as contracted
o   Review pricing and back-order management

Your Education Should Be…
Minimum Education:
College degree preferred

Your Physical Work Environment Will Require…

INTERACTION:
Internal Departments/Customers - Operations, Proposals, Project Management, Engineering, etc.
Vendors – Supplier, Distributors, etc.
Accounts Payable when dealing with invoices
Shipping & Receiving

WORKING CONDITIONS:
Some Outdoor
Office Environment

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:
Safety Glasses
Steel Toe Shoes
Ear Plugs
Safety Vest
Gloves (when needed)
Face Shield (when needed)

PHYSICAL REQUIREMENTS:
Walking
Standing
Using hands
Bending
Lifting

Your Experience Should Be...

Your Professional Experience Should Be…
•   Ability to work to high level of accuracy and efficiency within a fast-paced engineered to order manufacturing environment.
•   Identify and develop vendors
•   Experience in developing supply chain management strategies required
•   Participate in developing and implementing global supply chain management strategies
•   Good negotiation skills required
•   Strong understanding of contracts, contract requirements, and contract management required
•   Knowledge of steel/metal production process and markets preferred
•   Understanding of international business and international sourcing process preferred
•   Coordinate processing of repairs and obtaining loaner equipment as needed, or requested

Our Benefits Package...

Addetto Controllo Qualità / NDT (Bagnolo Cremasco, Cremonia, Italia, 26010)

Garantire il successo di Chart…

IMB – Chart Industries è specializzata nella progettazione e produzione di scambiatori di calore a fascio tubiero per i processi / servizi più critici nelle industrie di raffinazione, petrolchimica, fertilizzanti e offshore fabbricati in una gamma di tipi di materiali che variano dall'acciaio al carbonio standard al tipo più esotico di alta lega e titanio.

Siamo alla ricerca di un/a ADDETTO CONTROLLO QUALITÀ/CND che si unisca al nostro team.

Le tue attività quotidiane...

Eseguire controlli visivi e dimensionali e non distruttivi (CND) su materie prime, semilavorati e prodotti finiti, utilizzando diverse metodologie come ultrasuoni, radiografia, liquidi penetranti e magnetoscopia.
Interpretare i risultati dei test e redigere report dettagliati, identificando eventuali difetti o anomalie.
Collaborare nella progettazione e nell'implementazione di piani di controllo qualità.
Assicurare il rispetto delle procedure aziendali e delle normative relative ai CND.
Segnalare tempestivamente eventuali problematiche di qualità e supportare la risoluzione delle problematiche
Gestire e mantenere la strumentazione di controllo in buone condizioni e ben tarata.

Requisiti e qualifiche...

Diploma di scuola superiore a indirizzo tecnico (meccanico, elettrotecnico, aeronautico).
Ottime capacità di lettura del disegno tecnico.
Precisione, attenzione ai dettagli e capacità di lavorare in modo autonomo.
Capacità di lavorare in team e di comunicare in modo efficace.
Conoscenza della lingua inglese.
Capacità di utilizzo del pacchetto MSOffice.
Conoscenza delle diverse metodologie di CND e delle relative normative / Certificazioni di secondo livello per i metodi di CND utilizzati (UT,PT,MT,RT, MSLT ecc.)
Esperienza pregressa in ambito di controlli non distruttivi (CND).
Capacità di interpretare i risultati dei test e di redigere report dettagliati.

Datore di lavoro per le pari opportunità...

Come IMB - Chart Industries offriamo un ambiente di lavoro aperto e inclusivo, senza discriminazione di razza, nazionalità, genere, orientamento sessuale, disabilità ed età.

Field Technician Electromechanical (Gent, Gent, Belgium, 9000)

Ensuring Chart’s Success…

Howden Maintenance Partners is part of Chart Industries and is a growing service company within the group, specializing in the maintenance, repair, and overhaul of industrial machines—both electrically and mechanically rotating. Think of electric motors, pumps, gearboxes, generators, steam turbines, turbo compressors, reciprocating compressors, and expanders. This work can be carried out either on-site at the customer’s location or at one of our facilities.

Chart Industries is represented in more than 40 countries and employs over 11,700 people.

As a Service Technician, you will go on-site to overhaul machines at the customer’s location. If more extensive maintenance is required, you will be responsible for disassembling the machine so that the maintenance or repair can be carried out in the workshop. After the maintenance or repair, you will reassemble the machine at the customer’s site.

What Your Day-to-Day Activities Will Be…

You overhaul all types of (electro)mechanical equipment such as compressors, turbines, and pumps.
During disassembly, you will measure the machine, dismantle it, and prepare it for transport.
After the overhaul or repair in the workshop, you will reinstall the machine on-site, align it, and bring it back into operation.
While disassembling and assembling the installation, you will handle tasks such as fitting, aligning, determining clearances, final assembly, and possibly installing new equipment. You will use the necessary tools and, in consultation, arrange for any special tools to be made.
You check whether the work can be carried out safely.
You are responsible for test runs of the repaired or newly installed equipment, in consultation with the supervisor or customer.
You configure various components—hydraulic, pneumatic, or electrical.
You maintain records of the work performed, newly acquired parts or tools, and hours worked.

What do you bring to the table?

You have a secondary technical education diploma or equivalent through experience.
Pump technology, hydraulics, and pneumatics hold no secrets for you.
You have experience with aligning directly coupled machines or those with belt drives – check!
Basic knowledge of mounting and dismounting bearings is definitely a plus.
You enjoy working outside the traditional 9-to-5 schedule.
You hold a Category B driving license.

You get extra points for:

You have a strong affinity with the industrial sector (chemicals, petrochemicals, power, etc.).
You are passionate about your job and interested in the latest developments in your field.
You are a team player, but also work well independently—your strong communication skills support you in both.
You thrive on working in new and changing environments.
Organization, flexibility, and independence are your middle names.
The idea of occasional international travel makes your heart beat faster.

What's in it for you?

Work at a company that does what no other company in Europe can do – not too bad, right?
You’ll be immersed in a unique business with a steep learning curve.
Howden Maintenance Partners offers a pleasant, family-like SME atmosphere, supported by the strength of a large multinational – Chart Industries. A true win-win.
Work for a company that genuinely cares about its employees. Your well-being is our top priority.
A company car for personal and professional use
A daily net expense allowance for each day worked
32 days off per year to enjoy what you love, plus compensatory time
Eco vouchers worth €250 per year

Need an Accommodation...

Field Service Engineer (Chesterfield, England, United Kingdom, S42 5UY)

The Role

Exciting opportunity for a Field Service Engineer!

As a Field Service Engineer, you will have the distinguished responsibility for the Howden rotating equipment machinery. More particularly, you will engage in mechanical repair, service, installation and commissioning of rotating plant across the customer sites of Howden in the UK primarily and overseas occasionally. This position gives the great opportunity to travel across the UK with a focus on the Midland area (Liverpool, Burmingham, and Manchester) with all traveling expenses paid and a traveling allowance as bonus. You will focus on turbomachinery (compressors and steam turbines), fans and associated equipment, and the role is mechanically biased but electrical experience would be advantageous.

Howden are a global engineering business who focus on providing clients with industrial products that help multiple sectors improve their everyday processes. Howdens core focus is on providing quality solutions for air and gas handling and have over a century of experience in doing so.

What will you do?

Ensure adherence to company environmental, health and safety standards in compliance with company policies to ensure a safe working environment and the minimization of environmental impact
Traveling on-land with our company car from Monday to Thursday and weekends when necessary (depending on business needs)
Preparation of Health and Safety risk assessments prior to and during on-site assignments, strictly following Howden and customer Health and Safety policies
End-to-end responsibility on the routine service, repair, installation and commissioning of rotating equipment in compliance with company standards and requirements
Communicate with clients to control on-site activities and provide technical support pertinent to installation, commissioning and service/repair
Prepare and issue all documentation relative to processing of on-site activities – daily reports, visit reports, site communications, time-sheets and commissioning documents
Carry out on site analysis of machinery and provide condition reports with the aim of driving additional business through service upgrades/ spare parts requirements etc
Interact and respond to all aspects of the business, supporting SHE, efficiency, delivery and quality improvements.
Frequent travel within the UK and worldwide

What do you bring?

IOSH Managing Safely
Recognised engineering apprenticeship
HNC in Mechanical Engineering or relevant experience gained through working in as a multi skilled service engineer in a rotating machinery industry
Significant experience of working in a mechanical environment/ industrial sites - Waste Water, PCOG and Power Industry preferred
Time Management
Good communication skills
Ability to self-manage in remote locations

Chart is an equal opportunity employer...

Project Planner/Scheduler (Allentown, PA, United States, 18104)

Ensuring Chart’s Success…

Chart Industries is looking for a Project Planner/Scheduler for our Cryo Technologies projects, paving the way in Helium and Hydrogen Liquefaction solutions. In this role, you will be responsible for all aspects of costing and subsequent gross profit for Cryo Technologies projects, with real time cost reporting vs proposals and budget and accurate full project forecasts. This position will also be responsible for POC revenue recognition monthly in line with acceptable and applicable standards, control of all project funding aspects to ensure net cash positive outcomes, and identification and control of all compensation events in close cooperation with the operational project team.

What Will You Do?

Key Controls: Generating and forecasting a project cash flow profile. Supporting the Project Manager to establish the project master schedule and project implementation program. Control cost forecasts and optimize resource man-hours peak level to a manageable level (labor profiles). Perform risk analysis of project schedule and estimates. Develop commitment and expenditure cash flow curves. Confirm project staffing plan with organizational approach.

Project Financial Management: The cost engineering function is essentially predictive, dealing with estimates and forecasts based on engineering drawings and specifications, and tracking work to completion. Cost accounting is essentially retrospective and deals with work accomplished relative to the contractual terms and conditions and with the consequent invoices, cash requirements and payments. Manpower control, employer costs, and reimbursable costs will be monitored closely to ensure the budget is controlled and not exceeded.

Project Change Control: A policy of no surprises is to be maintained. Early identification of change is to be managed and channeled for approval. A scope change register must be maintained at all times. The control of changes to the project scope is a critical area of the overall management and formal procedures relating to change control will be adopted for the project. Change notices will be reviewed and discussed at regular intervals in the project life. Revise the project budget and forecasts monthly to reflect approved changes. The management of project scope changes will be conducted in accordance with the project change control procedure.

Project Control Systems: Utilize the most appropriate systems to complement the scope of works and management expectations. It is envisaged that the main elements will include: Estimating System; Documentation control; Project progress; Cost management; Time management system; and Planning and scheduling systems.
Continuous improvement: In partnership with Project Control teams across the organization and Finance, drive innovation and continuous improvement strategies and plans to improve existing standards, processes and tools. Develop project control procedures for inclusion in the business standards as well as full implementation of project control systems.

Your Experience Should Be...

Bachelor’s Degree in a related field (Management accounting / Cost accounting / Finance).
5+ years related experience in a project environment.
Knowledge of ERP based financial reporting systems.
Advanced understanding of Microsoft Excel
Good communication skills (verbal, read and write)
Deadline driven and good
Analytical skills
Ability to work under pressure

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Senior Engineer Quality (Chennai, Tamil Nadu, India, 600077)

Ensuring Chart’s Success…

What Will You Do?

Conduct QC audits according to schedule and compile QC audit report (audit and report accurate, on time, and according to procedure).
Undertake Supplier inspections of dimensional, visual & performance tests of valves, piping, welding/fabrication, acoustic enclosures, silencers, base frames, machined components, pumps, motors, lube oil systems, hydraulic systems, heat exchangers, and report on conformance to DGM – SQA , Authorize the release of items to site in order to indicate quality conformance.
Initiate costumer inspection by placement of call to customers as per the quality plan and compile all the documentation as per customer quality assurance plan.
Initiate, follow up & close out of Non Conformance Reports (NCR) on products found to be non-compliant. Initiate CAPA / 8D with suppliers for all the NCRs; ensure all corrective and preventive measures are implemented.
Ensure stores goods received items are inspected & supplied in accordance to purchase order specification and provide assistance to in house inspections when .required.
Ensure qualification of welding process, welders, NDT operators, painting process, hydrostatics and other respective equipment test procedures and keep records.
Verify & ensure Suppliers are working in accordance to the latest copies of Howden India Purchase Specifications, drawings & Procedures.
Monitor the manufacturing progress and do follow up/ expedite at supplier’s place whenever required.
Expedite progress on additional Orders at suppliers during inspections. Surveillances audits

Your Physical Work Environment Will Require…

Complexity factors:

Suppliers trying to change of goalposts – unable to comply to defined specifications & procedures
Pride in work of suppliers - Lack of maintaining a high Quality standard.
Lack of commitment - Suppliers does not always adhere to committed delivery dates.
Working with unskilled artisans – quality of fabrication leading to non-conformance on the product which can lead to delays

Creativity:

• Finding solutions to problems – assisting suppliers to find solutions, making suggestions to simplify work in progress

• Ideas to improve production flow to save time and money in the fabrication process

Your Experience Should Be...

• Diploma in Mechanical Engineering with ten to twelve years of work Experience Or Bachelor in Mechanical Engineering with seven to ten years of work Experience from the Petrochemical, Oil & Gas Industry (PCOG).Knowledgeable on the use & applications of various measuring & test equipment, Ability to read & interpret technical drawings & specifications.

• NDT leve-2 in PT, MT, UT,VT & RT from ASNT or equivalent.

• Good knowledge of steel fabrication and welding processes.

• Good knowledge of inspection & testing of process equipment like pressure vessel, lube oil systems, instrumentation, valve, piping fabrication, motors, control panels etc…

• Computer literacy – Microsoft Office Suite, particularly Word, Excel & PowerPoint.

• ISO 9000 quality Management systems training.

• Accredited internal auditor on quality management system – 9001-2015.

• Certified Welding Inspector Course from WRI, AWS or equivalent

• NDT leve-2 in UT.

• NDT leve-2 in RT film interpretation.

• Skilled in environmental and legal issues around QC & Safety

• Proficient in MS Office environment

• Accredited internal auditor in Integrated Management systems. (ISO-9001, 45001, 14001

Energy & Industrials New Build Sales Manager, Japan (Tokyo, Tokyo, Japan, 13-0026)

Ensuring Chart’s Success…

Chart Industries Company including Howden is a global engineering business who focus on providing clients with products that help multiple sectors improve their everyday processes. Chart’s core focus is on providing quality solutions for air and gas handling and have over a century of experience in doing so.

We would like you to join our team as a dynamic and results driven Product focused New Build Sales Manager mainly for Energy & Industrials segment in Japan, you will become the vital link between our innovative technical solutions and our clients in Japan. Your ability to understand client needs, establish lasting relationships and convert opportunities into win-win sales scenarios, ensuring the continued success and growth of Chart, will be vital. As we continue to grow, this role will be primarily focused on Capex sales however will also focus on developing our wider Chart product portfolio for the Japanese EPCs, the end user, and local partners.

What Your Day-to-Day Activities Will Be…

Client relationship and sales management. Engage with current and potential clients, developing solutions that incorporate Chart/Howden’s extensive product portfolio. Manage client activity during various business and project development phases of an inquiry from its initial conception to one that can be forecasted, and revenue recognized.
Technical Expertise: Maintain an in depth understanding of our products and their applications, present precise value adds solutions to our clients’ needs and interests.
Collaboration: Work synergistically with internal teams, ensuring proposed solutions are comprehensive and aligned with client requirements. Engage Legal/Contract Administration, Finance/Credit, Business Solutions, Controls Systems, Services and business unit managers, and company management, as necessary.
Order growth: Lead APAC order growth through Japanese customers and set up long term business strategy planning.
Co-develop the product strategy to align with the company’s overall business goals.
Set goals and requirements for engineering & priority of projects.
Develop the roadmap for the product development and life cycle of the product.
Decision making and oversight during product development.
Develop intimate understanding of client challenges and interests, becoming a trusted technical advisor.
Ensure the continual flow of projects by establishing rapport with potential and existing customers.

Your Education Should Be…

A bachelor’s degree in engineering would be advantageous however due consideration given to relevant experience & transferrable skills.

Your Physical Work Environment Will Require…

Willingness to travel as required, with a focus on developing/closing the opportunities in Japan.

Your Professional Experience Should Be…

5+ years relevant industry experience in sales, business development and product management.
A thorough knowledge of EPC business.
A self-starter with a proven track record of meeting or exceeding sales targets and driving business growth.
A strategic thinker, an excellent communicator, negotiator and presenter, comfortable presenting up to and including C-Suite.
Proficiency with Salesforce tools and related processes.
Experience in Project Terms & Conditions.
Excellent communication skills and a very good command of the English language.

Project Engineer (New Prague, MN, United States, 56071)

Ensuring Chart’s Success…

What Will You Do?

Create plans, designs and customer solutions for assigned products and projects.
Develop and maintain process instrumentation diagrams (P&IDs) based on Customer specifications as required for the project.
Perform various calculations and analyses such as, but not limited to, fluid flow analysis, heat leak, pressure vessel thickness, pressure-building, vaporizer sizing, and/or piping and valve sizing, etc.
Assist designers in developing of general arrangement and production/assembly drawings.
Work with sales teams and customers to gain a better understanding of the system requirements and their implications to the system design and proposed solution.
Work with strategic suppliers to determine the correct components to be used in systems.
Provide regular updates of design status, drawings, BOMS and purchased equipment to project management.
Work with the shop and project management to meet customer and engineering requirements for fabrication, assembly and shipping.
Support production personnel during fabrication.
Conduct onsite field checkouts and commissioning of equipment.
On occasion, support the Proposals Team with quotation assistance.
Other duties and responsibilities as assigned by management.

Your Physical Work Environment Will Require…

Working Conditions

Office environment
Engineering lab include outdoor testing
Work related travel may be required (approximately 10% maximum)

Physical Requirements

Frequent standing, sitting and walking
Frequent computer work

Work Hazards:

Production floor environment will involve possible exposure to materials with rough edges, temperature extremes, moving mechanical parts, occasional flying debris, welding flash, chemical cleaning solvents and their odors.
Liquid hydrogen testing

Your Experience Should Be...

BS degree required, preferably in Mechanical Engineering
4 years of experience preferred in the engineering, design, fabrication and commissioning of mechanical equipment used in the pressure vessel, boiler, or oil and gas industry
Working knowledge of industrial codes and common engineering practices used within the oil and gas industry. Codes of specific interest are ASME B31.3, ASME Section VIII Division 1, and NFPA 52/59A
Experience with MathCAD calculation software
Experience with hands-on technical work which requires partnering with field operation and production staff
Experience with AutoCAD and SolidWorks® CAD modeling software, preferred
Experience with JD Edwards or other ERP and PDM software, preferred
Experience with mass manufacturing facilities, preferred
Excellent oral and written communication skills.
Highly motivated self-starter and a team leader.
Demonstrated ability to plan and manage multiple tasks.
Understanding of heat transfer, structural analysis, and fluid flow.
Basic understanding of cryogenic liquids, compressed gas, and their properties.
Must be proficient with the Microsoft Office, specifically Word, Excel, and PowerPoint.

Our Benefits Package...

Quality/NDE Tech II - Weekend Shift (Theodore, AL, United States, 36582)

Ensuring Chart’s Success…

Chart's QA NDE team is a key component in our ability to ensure we uphold both code and customer requirements to enable us in delivering the highest quality product. This position will be responsible to carry out code and/or customer required non-destructive examinations and testing. This includes both the application of the method as well as interpretation of the resulting data and filing a formal report on the results. Examination methods can include, RT, UT, PAUT, LPT, MT, and VT, depending on qualifications.

What Will You Do?

Conducts penetrant, ultrasonic, radiographic or magnetic particle inspection when necessary and in a timely manner. Perform other NDE or destructive testing as required.
Test parts according to engineering and customer standards and specifications.
Accurately record and communicate the examination results where required.
Participate in the development of new methods or techniques whether it is for a customer specific project or for broader application.
Understand and comply with all Code requirements as well as customer specific requirements.
Report any incidents where our compliance could be in jeopardy.
Communicate change of shift requirements to ensure team members receive accurate and reliable information and documentation.
Adhere to all safety standards and regulations.

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling.
Frequent pushing, pulling and handling of material.
Occasional climbing and working at elevated positions.
Repetitive hand movements during welding operations.

Your Experience Should Be...

1+ years' experience in one or more methods of NDE Level II work
Basic understanding and experience with Code compliance, preferably ASME
Knowledge of QMS and adherence preferably ISO 9001
Familiar with other NDE and destructive test methods such as PCT, BLT, Tensile and Charpy impact
Certification in RT Level II or UT Level II is required
Additional certification in LPT level II, MT level II or AWS-CWI is preferred
Computer and web browser skills
Readily takes action on challenges and with a "can do" attitude
Identifies and seizes new opportunities
Encourages the open expression of diverse ideas and opinions
Attentively listens to others
Willingness to ask questions to gain a better understanding
Uncovers root causes to drive continuous improvement
Shows personal commitment and takes action to continuously improve
Accepts assignments that broaden capabilities
Learns from new experiences, from others, and from structured learning
Makes the most of available development resources

Your Education Should Be:

High school diploma required
Bachelor's or Technical degree in NDE or related field preferred
Technical training in RT or UT required

Our Benefits Package...

Quality Tech (Theodore, AL, United States, 36582)

Ensuring Chart’s Success…

The Quality Department at Chart's Alabama facility helps create and maintain the culture that customer satisfaction through quality products is key. This is a very hands-on team that ensures as business needs change, quality process and results are continually evaluated for progress or new solutions implemented.

What Will You Do?

Provides basic analysis of data and writes summaries to validate or show deviations from existing standards
Performs work under direct supervision
Handles basic issues and problems and refers more complex issues to higher-level staff
Utilizes basic tools (such as calipers, micrometers, rulers etc.)
Inspects products to ensure conformance to established quality standards
Conducts sample receiving inspections on purchased parts
Gather gas samples in support of product gas analysis
Initiates nonconformance reports
Prepares samples for mechanical testing
Performs tensile strength and impact testing
Conducts base metal and bend tests

Your Physical Work Environment Will Require…

While performing the duties of this job, the employee is regularly required to stand; walk and sit. Frequently uses hands to handle or feel objects, tools or controls and reach with hands and arms. Occasionally required to stoop, kneel, crouch and crawl. Must occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close vision, color evaluations and the ability to adjust focus.

Your Experience Should Be...

1 + years of quality technician experience or minimum of 2 years manufacturing experience
Experience reading and interpreting blueprints and work orders
Basic math skills (weight measurement, volume, distance, multiplication, and division)
Attention to detail essential
Basic computer skills
Strong time management skills
Proven ability to identify, reason and problem solve minor non-conformities and deviations
Overtime and weekend hours, as needed
Welding experience, a plus

Our Benefits Package...

Chargé de support technique externe H/F (Nogent-sur-Oise , N/A, France, 60180)

Ensuring Chart’s Success…

Chart Industries est un fabricant mondial d’équipements et de solutions hautement techniques pour les marchés de l’énergie, de l’industrie et des gaz industriels (11200 pers, 40 pays).

Avec un savoir-faire de plus de 100 ans dans la compression des gaz, Howden BC Compressors, assure le support technique d'ensembles de compresseurs à membranes et à piston développés sur mesure.

Dans le cadre d’un développement, nous recrutons un Chargé de support technique externe H/F pour notre site de Nogent-Sur-Oise composé d’une trentaine de personnes.

What Will You Do?

Rattaché au Responsable Aftermarket, votre rôle est de garantir le support externe et interne en termes de solution technique pour les activités de maintenance sur la base machine propre et autres OEM, travailler sur l’obsolescence et l’interchangeabilité des pièces conformément au design.

A ce titre, les principales missions sont :

Apporter une assistance technique au service après-vente en particulier les vendeurs et techniciens de maintenance
Assister techniquement les différents acteurs
Etudier et identifier les améliorations (design, process de réalisation, de montage…) de pièces, composants, sous-ensembles et ensembles sur compresseurs existants de la base machine en collaboration avec le team leader
Réaliser, mettre à jour des plans de conception ou plans d’ensemble pour clients GAD... en particulier pour le reverse engineering sur d’autres équipements NON OEM
Définir jeux et couple de serrage des pièces mécaniques.
Intégrer un groupe de travail pour résoudre le(s) problème(s) de fiabilité ou solution à implémenter, le cas échéant
Participer à des tests et essais, analyser les résultats et déterminer la mise au point d’un retrofit ou solution des projets AFM.
Participer à la résolution des problèmes techniques rencontrés par les techniciens SAV, les clients durant toute la vie du compresseur.
Participer au maintien des procédures et la documentation technique à jour dans l’environnement ISO 9001.
Réaliser des procédures d’opérations standards afin de décrire aux techniciens/opérateurs les étapes à effectuer dans le respect des normes qualité et sécurité.
Prendre en compte, respecter et faire respecter les règles santé, sécurité et environnement.

Your Physical Work Environment Will Require…

Your Experience Should Be...

Titulaire d’une formation bac+2/3 dans le domaine technique mécanique, vous justifiez d’une expérience professionnelle de 2 à 5 ans minimum dans une fonction technique dans le secteur industriel autour de la machine tournante.

Vous maîtrisez impérativement l’anglais ainsi que les outils informatiques.

Proactivité, organisation, rigueur, sens du service, adaptabilité, disponibilité, autonomie, bon relationnel sont des atouts indispensables pour réussir dans cette fonction.

Our Benefits Package...

Addetto Controllo Qualità / NDT (Bagnolo Cremasco, Cremonia, Italy, 26010)

Ensuring Chart’s Success…

IMB - Chart Industries specializes in the design and manufacture of shell and tube heat exchangers for the most critical processes/services in the refining, petrochemical, fertilizer and offshore industries fabricated in a range of material types ranging from standard carbon steel to the more exotic type of high alloy and titanium.

To enhance our staff, we’re looking for a: NDT operator

What Will You Do?

Perform visual, dimensional and non-destructive testing (NDT) on raw materials, semi-finished products and finished products, using different methodologies such as ultrasound, radiography, penetrant liquids and magnetic particle testing.
Interpret test results and draw up detailed reports, identifying any defects or anomalies.
Collaborate in the design and implementation of quality control plans.
Ensure compliance with company procedures and regulations relating to NDT.
Promptly report any quality issues and support problem resolution
Manage and maintain control equipment in good condition and well calibrated.

Requirements and preferred qualifications...

High school diploma in technical field (mechanical, electrical, aeronautical).
Excellent ability to read technical drawings.
Precision, attention to detail and ability to work independently.
Ability to work in a team and communicate effectively.
Knowledge of the English language.
Ability to use the MSOffice package.
Knowledge of the different NDT methodologies and related regulations / Second level certifications for the NDT methods used (UT, PT, MT, RT, MSLT etc.)
Previous experience in the field of non-destructive testing (NDT).
Ability to interpret test results and write detailed reports.

Chart is an equal opportunity employer...

Fan System and Ventilation Engineer (Johannesburg, Gauteng, South Africa, 2091)

Ensuring Chart’s success:

Howden, a Chart Industries Company, is a global engineering business that focuses on providing clients with industrial products that help multiple sectors improve their everyday processes. Howden’s core focus is on providing quality solutions for air and gas handling, and have over a century of experience in doing so.

Howden MEA Projects Division (covering the African and Middle East regions) is looking for an experienced Specialist in the field of fan station and ventilation systems design. This position is responsible for preparing innovative and competent technical solutions and tenders in the marketing and sales of turnkey projects. Provide competent ventilation solutions to mining and industrial customers with an aim to add value to the customers infrastructure and development needs.

What will you do?

Engineering: Effectively engage customers with applications enquiries. Perform fan station designs, and fan selections based on customer specifications. Understand all customer requirements and specifications clearly as received with enquiries. Prepare well written and presentable tender documents, inclusive of all tender returnable documents. Lead each application's opportunity through the process of tender to order. Drive accurate forecasting of opportunities in the business and ensure customer feedback is always captured, and add value to customer engagements.
Documentation: Pre-engineer fan system designs and generate fan curves suitable for selections made and to meet customer specifications. Engage with the legal and commercial departments with the objective of mitigating risks while satisfying client contractual expectations to secure orders. Generate a budget document suitable for project execution. Accurate tender programs and organograms to define full scope and overhead requirements within the shortest possible lead times.
Engineering Support: Engineering support during the tendering phase. Run a collaborative design process with the engineering team to ensure the best solution and scope of supply are clearly defined, checked, and tested. Assist the engineering team with the latest market and engineering trends to save on cost, design, and time.
Project Management: When required act as project manager for various projects to ensure relevant projects meet agreed standards and is delivered within an agreed timeframe.
Customer relations: Develop customer relationships to promote the Howden and Chart products and services, with a view to introducing enhancements to existing equipment. Work towards early customer involvement by becoming a partner through their respective planning phases by regularly meeting up high level project teams from Customers (end-users), Project Houses, EPCs, and consulting firms.
Managing Tenders: Adhere to the tender process (enquiry, risks, contracts, costs, and submission of documents) to be accomplished in line with client specifications and in accordance with Howden standards.
Marketing: Contribute to the effective marketing of company products and technologies to ensure the conversion of a tender into a sale conducted in accordance with company procedure.
Compliance: SOX Compliance: Adhere to Sarbanes Oxley and AX controls.

Your Experience Should Be…

A tertiary qualification in Mechanical Engineering (B-Tech, B-Eng or BSC Eng).
Membership of a reputable engineering body such as ECSA and/or SAIMechE is an added benefit.
Extensive knowledge of Microsoft Excel, Word, Outlook, PowerPoint, Projects, and AutoCAD
Minimum 3 years’ experience in a mining or industrial sales environment with Mine Ventilation Engineering experience.
Exposure to multiple disciplines of Engineering, and the ability to read and interpret engineering drawings and CFD studies
Good communication and negotiation skills
Working knowledge of standard contracting methodologies, preferably NEC & FIDIC.
2 years’ experience in a project management environment and/or tender preparations

Our Benefits Package…

Howden provides a great benefits package in addition to an attractive salary. The Company also offers the opportunity to work in an exciting, fast-paced environment within a global engineering company.

Maintenance Tech (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

This is a Night Shift Position.

What Will You Do?

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

Performs daily, weekly, and monthly preventative maintenance on all plant equipment
Performs troubleshooting, problem solving, and countermeasure activities on all production and facility equipment
Performs mechanical maintenance with frequent electrical (480V, 208V, 120V, 24VDC) and controls-related troubleshooting
Dismantles machines or equipment using hand tools or power tools to examine parts for defects and repairs or replaces
Completes daily maintenance paperwork for assigned Work Requests and Checklists
Assists with installing conduit and wiring for new equipment installations
Performs special duties as assigned by Maintenance Supervisor/Manager

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Thorough understanding of maintenance troubleshooting for electrical, mechanical, hydraulic and pneumatic manufacturing equipment
Working knowledge of 480 Volt 3 phase power, logic controllers, motor starters and variable frequency drives
Ability to read and follow written instructions
Ability to read and interpret electrical and instrumentation drawings and specifications
Flexible to plant's on call needs

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

Mostly Outdoor/Shop Environment with exposure to heat, cold, wet, dry, windy, loud noises
Must be able to work outdoor and indoor
Must be able to lift, push, pull, carry 50 lbs
Must be able to work in confined spaces in between and underneath equipment
Must be comfortable working at height
Must be able to squat, bend, crouch, work on hands and knees and twist.

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:

Safety Glasses
Steel Toe Shoes
Ear Plugs
Gloves (when needed)
Hard Hats (when needed)

Your Experience Should Be...

Minimum Experience:

3+ years of electrical maintenance experience
1+ years of experience with CNC Machine Repair
1+ years of experience in a manufacturing environment desirable
Overhead crane repair experience
Experience with troubleshooting PLC based control systems desired
Strong background in electrical troubleshooting highly recommended

Skills Required: (i.e. certifications, licenses, registrations, etc.):

Welding and fabrication skills considered a plus

Our Benefits Package...

Sales/Application Engineer I (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

The Sales Applications Engineer is primarily responsible for providing internal sales support for the air-cooled heat exchanger division of CHART. Sales support consists of, but not limited to, fielding requests for quotations (RFQ’s), technical / commercial evaluation of RFQ’s, thermal and mechanical designs, submittal of detailed technical / commercial proposals to customers, technical consultations, working with Business Development Managers (BDM’s) negotiating contracts with clients, assisting with the project execution of contracts, developing relationships with customers, and advancement of sales tools including product configurations.

What Your Day-to-Day Activities Will Be…

Strong organizational and time management skills.
• Ability to manage multiple tasks simultaneously.
• Proficient evaluation of incoming inquiries and assessments of customer requirements.
• Efficient and accurate thermal analysis and mechanical design execution.
• Provide interpretation and clarification on thermal and mechanical analysis.
• Formulate a technical and commercial proposal package in alignment with customer specifications, industry standards, and company standards.
• Provide technical support, troubleshooting, and optimization of heat transfer solutions.
• Evaluate heat exchanger designs and heat transfer surface concepts using known analytical and experimental methods.
• Collaborate with and appropriate Subject Matter Experts to solve engineering and design scenarios and support on heat transfer engineering efforts.
• Partner with customers and internal functional groups on safety integration
• Fully understand legal review process and ability to collaborate with BDM and legal counsel, if necessary, on contract acceptance.
• Detailed review of contract commercial, freight, and payment information to ensure all deliverables are attainable.

Your Education Should Be…

Bachelor’s in Mechanical or Chemical Engineering or related field preferred

Additional Skills Required...

Ability to lead and influence a cross-functional team.
• Read, analyze, and interpret technical data into everyday language.
• Write in a clear and concise manner.
• Effectively present information to customers, departments and respond to questions in a high-speed environment.
• Effectively facilitate meetings and execute plans.
• Proficient in using Excel, PowerPoint, Adobe, Word, and MS Project.
• Proven depth of knowledge operating in an ERP-based manufacturing environment.
• Superior analytical skills.
• Ability to read, analyze and interpret customer and industry technical specifications, engineering drawings, BOMs, financial reports and legal documents.
• Ability to effectively present information to top management, customers, and cross-functional leadership.

Your Professional Experience Should Be…

0-3 years of industry experience
• 0-3 years of experience with thermal design, rating, and performance analysis
• 0-3 years’ experience in Oil and Natural Gas Industry
• Knowledge of ASME Section VIII, Division 1 and API 661 Standards
• Exceptional and seasoned customer service experience

Chart is an equal opportunity employer...

Accounts Payable Trainee (Budapest, Budapest, Hungary, 1083)

Ensuring Chart’s Success…

Howden is a world-class engineering company with a proud heritage and a desire to be the world's leading application engineering company providing solutions for you in air and gas handling. With 6,000 employees in 27 countries we are undergoing a period of significant business growth. Based at our global headquarters near Glasgow, UK, Howden provides high quality air and gas handling products and services to the power, oil & gas, mining and petrochemical industries - just to name a few.
The company’s Shared Service Centre was launched in 2015, located in Budapest. The Howden Global Business Service Centre employs more than 100 people who provide support in Finance, HR, Data Analytics and IT fields. Howden offers complex and challenging jobs, great work environment, competitive salary and opportunity to develop and implement promotion and training to work. Innovative and agile, we are looking for talent to grow with us in the following role:
Accounts Payable Trainee

What Will You Do?

The main role purpose is to support the booking of the incoming invoices on a timely manner and trouble shoot upcoming requests from the vendors. The role holder will support the end –to –end accounts payable process across global scope and ensure the accurate sub –ledger and vendor master data maintenance. By representing the company core values the ideal candidate will build up an excellent relationship with our partners and provide high quality service to internal and external clients as well.
Key Accountabilities
• Process various type of invoices and resolve problems
• Reconciliation of the relevant accounts payable accounts and intercompany payment transactions
• Support query handling and correct errors in the supplier statements
• Tracking and reporting of metrics on the overall accounts payable process
• -Support process improvement and standardization projects

Your Experience Should Be...

• Ongoing BA/MSc studies in the field of economics and/or accounting
• Fluency in English is a must, but any European language knowledge is an advantage
• Strong MS Office knowledge, especially in Excel
• Strong analytical skills and ability to understand business needs and influence business impact
• Excellent communication and interpersonal skills
• Attention to details and accurate data management

Our Benefits Package...

Howden provides a competitive and expansive benefits package that ensures not only do you perform on an optimum level, but also balance your private and professional responsibilities in a friendly and modern environment.

Development Opportunities:

Home office allowance, extra holidays, employee recognition initiatives, well-being initiatives and team buildings
Constant learning opportunities and challenges that help our employees grow
Vertical and horizontal organizational movement
Professional practice and free e-learning opportunities

Flexible and supportive working environment:

Our new and modern office is in the heart of Budapest at the corporate centre in Corvin Negyed behind the Corvin plaza: Budapest, Bókay János u. 44, 1083

Hybrid schedule (3-4 days at home, 1-2 days at the office)
Non-binding working hours
Showering facilities for cyclists and sportspeople
Workplace extras to facilitate working at the office: free coffee and different beverages, fruit day, a social corner
State-of-the-art technology and IT equipment: laptop, headset, workstation, 2 monitors per employee, Windows and O365 software
Accommodation for special needs and those with a physical disability
Global diverse community where people can support and learn from each other, celebrate successes and have fun in team buildings and programs.
Opportunity to be involved in our ESG “Bright Future” initiatives

Assistante Commerciale AFM H/F (Chalon-sur-Saône, N/A, France, 71530)

Ensuring Chart’s Success…

Vue d’ensemble

Chart Industries est un fabricant mondial d’équipements et de solutions hautement techniques pour les marchés de l’énergie, de l’industrie et des gaz industriels (11200 pers, 40 pays).

Dans le cadre d’un remplacement, nous recrutons un Assistant Commercial AFM H/F pour notre établissement secondaire composé de 30 personnes et basé à Fragnes (proche Chalon sur Saône).

What Will You Do?

Rattaché(e) au département Chiffrage et Back office, vous assurez la réalisation des offres commerciales en support des Commerciaux AFM.

A ce titre, les principales missions sont :

• Piloter la CRM et la tenir à jour.
• Réceptionner les demandes envoyées par les clients et les entités Howden.
• Vérifier la faisabilité des demandes.
• Enregistrer les demandes et les transmettre au service Chiffrage dédié.
• Etablir les prix selon le référentiel en vigueur.
• Emettre l’offre commerciale pour l’envoyer aux clients et aux entités Howden.
• Mener les négociations commerciales.
• Relancer les offres actives auprès des clients et des entités Howden.
• Transmettre les éléments pour enregistrer la commande, vérifier les conditions de réalisation, de paiement et en informer les clients et les entités Howden/Chart industries
• Prendre en compte, respecter et faire respecter les règles santé, sécurité et environnement.

Your Physical Work Environment Will Require…

Your Experience Should Be...

Titulaire d’une formation commerciale de type bac + 2 (BTS MUC ou NRC par exemple), vous justifiez d’une expérience professionnelle de 5 ans minimum dans une fonction similaire, idéalement dans un environnement industriel international.

Vous maîtrisez impérativement un anglais commercial ainsi que les outils informatiques. La connaissance d’un ERP et d’une CRM est un plus.

Rigueur, sens du service, adaptabilité, disponibilité, autonomie sont des atouts indispensables pour réussir dans cette fonction.

Our Benefits Package...

Les avantages :
- Tickets restaurant
- 37H avec 13 RTT
- Possibilité de télétravail jusqu’à 2 jours par semaine en accord avec le manager

New Build EPC Sales Manager, Korea (Seoul, N/A, South Korea, 05836)

Ensuring Chart’s Success…

We would like you to join our team as a dynamic and results driven Product focused New Build EPC Sales Manager mainly for Energy & Industrials, you will become the vital link between our innovative technical solutions and our clients in the Korean EPC marketplace. With the EPC sector, your ability to understand client needs, establish lasting relationships and convert opportunities into win-win sales scenarios, ensuring the continued success and growth of Chart, will be vital. As we continue to grow, this role will be primarily focused on Capex sales however will also focus on developing our wider Chart product portfolio.

What Your Day-to-Day Activities Will Be…

Client relationship and sales management. Engage with current and potential clients, developing solutions that incorporate Chart/Howden extensive product portfolio. Manage client activity during various business and project development phases of an inquiry from its initial conception to one that can be forecasted, and revenue recognized
Technical Expertise: Maintain an in depth understanding of our products and their applications, present precise value adds solutions to our clients’ needs and interests.
Collaboration: Work synergistically with internal teams, ensuring proposed solutions are comprehensive and aligned with client requirements. Engage Legal/Contract Administration, Finance/Credit, Business Solutions, Controls Systems, Services and business unit managers, and company management, as necessary.
Order growth: Lead Asia order growth in EPC business and set up long term business strategy planning.
Identify and pursue new Chart/Howden opportunities within EPC projects, focusing on Energy & Industrial segment.
Co-develop the product strategy to align with the company’s overall business goals for EPC business.
Set goals and requirements for engineering & priority of projects.
Interact with customers, classifications societies, authorities, suppliers, and partners, maintaining a pulse on the rapidly changing industry, market trends, competition activity, key regulatory changes and client interests.
Ensure the continual flow of projects by establishing rapport with potential and existing customers.

Your Education Should Be…

A bachelor’s degree in engineering would be advantageous however due consideration given to relevant experience & transferrable skills.

Your Physical Work Environment Will Require…

Willingness to travel as required, with a focus on developing/closing EPC opportunities in Korea.

Your Professional Experience Should Be…

5+ years relevant industry experience in sales, business development and product management.
A thorough knowledge of EPC business.
A self-starter with a proven track record of meeting or exceeding sales targets and driving business growth.
A strategic thinker, an excellent communicator, negotiator and presenter, comfortable presenting up to and including C-Suite.
Proficiency with Salesforce tools and related processes.
Experience in Project Terms & Conditions.
Excellent communication skills and a very good command of the English language.

Tool and Die Maker (La Crosse, WI, United States, 54601)

Ensuring Chart’s Success…

“Cooler Together” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so that’s how we got our “Cooler By Design®” tagline. Of course, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers and strive to work together as a team, making us “Cooler Together”. With our recent acquisition of Howden, we’re also “Stronger Together”. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too. Interested to learn more? Take a tour of Chart City (https://chartcity.chartindustries.com/) to get a feel of how Chart equipment solutions impact our daily lives. Chart is looking for bright, talented candidates that have a desire for a career in an exciting and evolving industry. This could be you!

Make up to $40.00 per hour!
Selects, sets up and operates numerous pieces of precision machinery, equipment and fixtures for the purpose of laying out and preparing of fin die blanks; performs die maintenance and repair and performs necessary maintenance of all precision components of the fin presses.
Supports Engineering's needs in the design, fabrication, installation, modification and repair of tooling and fixtures.

Your Experience and Education Should Be...

Person should have or should qualify for a five-year state indentured apprenticeship or equivalent.
Person should have background in mathematics, mechanical drawing, metallurgy and machine shop practices.
Ability to program CNC equipment using ‘G’ and ‘M’ code format
Ability to read prints and interpret machining requirements.
Ability to maintain machining tolerances of ±.0002.
Ability to square up fixturing on table to .0000 over a length of 36".
Ability to identify different shapes of truing diamonds and the working condition of the diamond.
Must be able to adjust tooling and equipment to tolerance of .000 to .0000.
Ability to identify, monitor and compensate for machine expansion changes.
Ability to stone and hone a sharp radius on tool steel.
Must be able to communicate at all levels from shop floor operator to engineer.

What Will You Do?

Maintain inventory of tools and materials for operation of Tool Room.
Inspection of tools, dies and fixtures that are made by outside vendors.
Keep records of all dies.
Make tool reports of finished tools.
Coordinate work between tool maker and die form grinders.
Work with Engineering to understand tooling concepts, requirements, layout, anticipated problems, and tool build load forecast.
Support Maintenance when needed.
Maintain and overhaul fin presses.
Build, sharpen and troubleshoot fin dies.
Assist Engineers in estimating time and materials of jobs.
Coordinate heat treat process.
Develop and troubleshoot new tooling and make revisions if needed.
If required, prepare tool sketches.
Set up and operate precision tools.

Your Physical Work Environment Will Require…

Working conditions may vary from a temperature controlled, isolated environment to areas which are cramped, greasy and poorly lit. Exposed to sharp edges, high speed cutting tools and oil. Standing, reaching, bending and lifting 0 to 50 lbs. When lifting over 50 lbs., two people are required.
The employee who performs this job has responsibility to maintain proper housekeeping in the work area and keep machines in good operating condition. Is also responsible for safety and quality workmanship and procedures.
The above statements are intended to describe the general nature and level of work performed by individuals assigned to this classification. It is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so assigned.

Our Benefits Package...

Our Benefits | Chart Industries

**Sponsorship is not offered for this role.

CAM Programmer (Night Shift) (Stafford, TX, United States, 77477)

Ensuring Chart’s Success…

What Will You Do?

Required to check prints with design engineering for accuracy and correct information on prints.

Verifies solid models to prints and red lines back to Engineering

Assist with set up techniques and application to program and route detail

Required to recommend cutting tool purchase and catalog accordingly.

Assist with set up techniques and application to program and route detail.

Recommends fixture requirements.

Performs concurrent engineering practices.

Must be able to learn and use CPI products, services, and systems used in business.

Must be able to follow and write routine procedures.

Must be able to use complex equipment requiring continuous attention.

Must be able to make minor decisions and ask identifying questions.

Your Experience Should Be...

High school diploma or General Education Degree (GED); progressive experience as a Journeyman

Minimum four years’ CNC programming; extensive multi-axis turning with ESPRIT preferred.

Must be proficient with process/route detail knowledge for accuracy of detail to shop floor.

Good working application with geometric tolerancing.

Ability to understand and promote CPI’s safety standards and guidelines.

Ability to communicate respectfully, orally and in writing, to build both internal and external relationships.

Must be able to routinely follow work orders and understand customer specifications with attention to safety and quality.

Must be able to work 2nd shift.

Must be able to work weekend when needed to support our customer needs.

Must be able to work overtime as needed.

Our Benefits Package...

Production Assembler - 2nd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

The Assembler's scope is to safely assemble individual components into heat exchangers in accordance with the engineering specifications while following work instructions and leadership’s directions; as well as other production related tasks.

What Will You Do?

Stacking/Assembling materials in accordance with engineering drawings.
Forklift, pallet jack, crane, material, etc utilized and safely handled.
Following direction independently from supervisor to completion of job responsibilities.

*Please note, this is a 2nd shift position.

Your Physical Work Environment Will Require…

Manufacturing Plant Environment – Required PPE.
Warehouse driving such as forklift, lift trucks, etc.
Shipment transport, driving box truck, etc.
Lift up to 50 lbs.
Sitting, standing, stooping, bending, other movement as necessary.

Your Experience Should Be...

Safety Rules
Manufacturing
Quality Checks
Teamwork and Communication
Able to Follow/Read assembly drawings and blueprints
Tape Measure / Calipers / Micrometer / Handtools
Pallet Jack
Assembly
Quality Issues/Recognigtion
Machine Operators
Clamp Truck
Stack Boxes
General Maintenance
Product Quality
Hoists
Bundling
Production Process
Safety Procedures
Customer Specifications
Control Panels
PPE
Ability to:
- Adhere to Company Standards and Values
- Follow attendance guidelines and structure
- Meet deadlines for assignments
- Interact personably with co-workers and associates

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Engineer controls & commissioning (Zwijndrecht, Zwijndrecht, Belgium, 2070)

Ensuring Chart’s Success…

Howden Maintenance Partners is part of Chart Industries and is a growing service company within the group, specializing in the maintenance, repair, and overhaul of industrial machines, both electrically and mechanically rotating. Think of electric motors, pumps, gearboxes, generators, steam turbines, turbo compressors, reciprocating compressors, and expanders. This can be done either on-site at the customer’s location or at one of our facilities.
Chart Industries is represented in more than 40 countries and employs over 11,700 people

What Will You Do?

As Controls & Commissioning Engineer you are responsible for the control and protection systems of turbogenerator units. This ranges from troubleshooting, through commissioning after maintenance to complete retrofit of installations.

Your main tasks:

Project Management is a core task, as you’ll be responsible for the realization of our projects.
You actively seek opportunities for assistance with regards to contracts and for the retrofit of installations. You will also make cost calculations and prepare offers for retrofits.
You liaise with customers on site to explain the scope and explain all technical aspects of the project.
You’re responsible for the installation, assembly, disassembly, calibration, repair and maintenance of technical/electrical installations.
Reporting and communication with internal and external stakeholders.
Draw-up methods, procedures and manuals that check compliance with the predefined quality standards.

Profile wanted:

Skills:

Bachelor’s or master’s degree electrical engineering
Minimum 3 years of relevant experience
VCA-VOL certificate

Competences:

You can be the spider in the commissioning web and communicate with all stakeholders.
Prioritizing your customers comes naturally, even though you can set clear boundaries
We take Quality and Safety as serious as can be. You highly value a safe way of working and are a true advocate to create awareness too.
Stress is your best friend and enables you to gain an unseen focus and work ethic. Things will not always go as planned but that’s what you love about the job.

You’re a great colleague to work with – serious when you have to but enjoying a laugh when possible.

An offer you can't refuse

We offer a job with plenty of opportunities for development and training, along with a competitive salary.
You’ll have the chance to build a career with a niche player in the industry. You’ll be working in an (international) environment focused on growth, using the latest technologies and systems, alongside colleagues who share your ambition. You’ll have every opportunity to grow and realize your professional goals.

Challenging position with a competitive salary and attractive secondary benefits
Work with state-of-the-art systems
Be part of a young, ambitious, and energetic team
Opportunities to follow job-specific training courses
Pleasant and informal working atmosphere in a dynamic organization

Human Resources Assistant (Renfrew, Scotland, United Kingdom, PA4 8XJ)

The Role

The HR Assistant is responsible for supporting the Human Resources department in various administrative functions. This role involves handling employee records, maintaining HR systems, assisting with recruitment, ensuring compliance with HR policies, and providing general HR support to UK businesses. The HR Assistant works closely with the HR Operations Manager and Payroll Manager to ensure seamless and effective HR operations.

Who are we?

What will you do?

HR Process Management:

Support the entire employee lifecycle processes, including on boarding, benefits administration, performance evaluations, promotions, transfers, and off boarding.
Manage new hire onboarding processes, including documentation, orientation sessions, and induction. Ensure smooth offboarding for departing employees, including exit interviews and return of company property.
Support in streamlining and continuously improving HR processes to enhance efficiency and effectiveness.
Maintain and update employee records, including personal information, employment history, and leave details.
Maintain accurate and up-to-date employee records.
Ensure data integrity and security in compliance with data protection regulations.
Support HR Operations manager to generate HR reports and metrics for management review and decision-making.

Benefits and Wellbeing:

Support the administration of employee benefits programs, including health insurance, retirement plans, and other perks.
Provide employees with information and assistance related to benefits and compensation.

Compliance and Legal:

Stay updated on UK Employment laws, regulations, and industry best practices to ensure HR operations are in compliance.
Implement and monitor policies and practices that promote a diverse and inclusive workplace.

Payroll Coordination:

Collaborate with UK Payroll Manager to ensure accurate and timely payroll processing.
Verify payroll data, including salary adjustments, bonuses, and deductions, to ensure accuracy.

Employee Relations

Support People Managers in dealing with first stage Employee Relations issues including wellbeing, absence management and disciplinary matters

Continuous Improvement:

Proactively identify opportunities to enhance HR operations through process improvements and technology adoption.
Participate in HR projects and initiatives aimed at enhancing overall HR functions.

What do you bring?

An ideal candidate would likely have the following profile:

Bachelor's degree in Human Resources, Business Administration, or related field.
Strong understanding of HR laws and regulations.
Proficiency in HRIS (Human Resources Information System) software and MS Office Suite.
Excellent communication and interpersonal skills.
Strong organizational and leadership abilities.
Analytical mind-set with the ability to use data for decision-making.
Ability to establish and build sound working relationships
Previous experience of working in a Human Resource department e.g. the use of HR databases and practices

Our Benefits Package

A flexible, hybrid working environment
Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunities employer

Field Service Tech (New Prague, MN, United States, 56071)

Ensuring Chart’s Success…

We are looking for an independent, results oriented and self-motivated technician to provide a variety of service, training, and technical service support activities for a variety if cryogenic applications including mobile vehicles manufactured by the D&S Division at the Chart–New Prague, MN facility.

What Will You Do?

• Ensure timely and continuous quality service to the customer, by phone or site visits when necessary.

• Work with manager on customer communication.

• Prepare detailed service reports.

• Maintain tools and test equipment used for commissioning/service.

• Coordinate contact with all levels of supervision.

• Troubleshoot control systems.

• Read and understand electrical schematics and use of troubleshooting tools and meters.

• Read and understand plumbing schematics.

• Coordinate, perform and report results from testing. This includes logging results as required by written or verbal instructions.

• Adhere to contractual service agreements per sales and customer service directives.

• Perform quality tests as instructed by work instructions, engineering, or supervisor to ensure product quality.

• Weld using MIG and/or TIG in field conditions.

• Install equipment including bulk tanks, pipe, vaporizers, skids, dosers, etc.

• Utilize ISO 9000 knowledge and application standards.

• Observe and practice safety procedures and policies.

Your Physical Work Environment Will Require…

• Extensive travel to customer sites.

• Both outdoor and indoor work.

• Office and plant work.

• Exposure to metal cuttings and welding odors.

• May involve exposure to temperature extremes

• Occasional weekend and holiday work

• Required use of personal protective equipment.

• Frequent standing, sitting, bending, stooping, twisting, and walking,

• Frequent lifting up to 75 lbs., occasional heavier lifting.

• Occasional pushing, pulling of materials up to 40 lbs

Your Experience Should Be...

• At least 1-2 years’ experience, Tig welding experience, preferably with piping.

• Excellent communication skills used in answering customer’s questions and performing field service.

• Ability to read electrical and plumbing schematics preferred.

• Work well in teams and independently.

• Read and understand detailed blueprints.

• Must possess a working knowledge of personal computers including MS Office, JD Edwards.

• Basic understanding of Industrial Controls and PLC’s

• Basic understanding of cryogenic liquids and gases, and thermodynamics.

Production Assembler (Brentwood, NH, United States, 03833)

Ensuring Chart’s Success…

Chart’s Brentwood, NH location currently has an opening for a Generalist or a Sandblaster.

What Will You Do?

Assist with the assembly of transports and vessels through established manufacturing processes

Maintain cleanliness of assigned work area

Monitor equipment functionality and report maintenance needs

Prep units prior to painting using a blasting booth and other hand preparation methods

Prime units prior to painting using a spray paint application

Perform necessary touchups when needed

Perform maintenance on blast booth

Your Physical Work Environment Will Require…

Frequent standing, sitting, walking, bending, stooping, twisting and occasional crawling, heavy lifting, pushing, pulling, and material handling

Lifting up to 50 lbs.

Occasional climbing and working at elevated positions

Exposure to noise, dust, changes in light and hazards associated with a manufacturing and welding environment

Your Experience Should Be...

Some Welding Experience preferred

Previous blast experience in a manufacturing environment preferred

Previous experience in a shop, manufacturing or fabrication environment

Our Benefits Package...

- Competitive salary and benefits package

- Health, dental, and vision insurance

- Retirement plan

- Paid time off and holidays

- Opportunities for professional development and advancement

Field Service Tech (Franklin, IN, United States, 46131)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart's Field Service Tech position plays a key role in the field service repair of Chart's products. Chart's Franklin, IN facility is currently seeking candidates interested in a career that requires traveling, a special skill set, and dedication. This position performs a variety of functions including but not limited to welding, pipe fitting, installation, cutting, grinding metals at job sites in the field under the supervision of a CLI Site Supervisor.

What Your Day-to-Day Activities Will Be…

If welding: Perform ASME welding on pressure retaining and structural components per ASME VIII and B31.3 code standards. Primarily GTAW welding with the occasional use of SMAW and GMAW procedures
Perform work in a permit entry confined space environment
Perform all work safely and in compliance with applicable OSHA, ASME, Company and Client specifications
Operate company and rental vehicles and equipment
Cut, grind, and fit pipe and segments for welders
Assist with performance of testing of pressure vessels and piping systems
Bolt up piping assemblies
Assist with leak detection and equipment inspections
Assist with removal of insulation and structural components as needed to access work space
Work off of Scaffolding and or arial work platforms as needed
Handle basic issues and problems as they arise with the cognitive reasoning to refer more complex issues to higher-level staff
Perform other general tasks as directed by your supervisor
Report any near misses or injuries immediately to supervisor, HSE Manager, and Project Manager
Be aware of all PPE and site-specific safety requirements
Perform work under direct supervision

Your Education Should Be…

High school diploma, GED or equivalent
Vocational school education (Preferred)

Your Physical Work Environment Will Require…

Able to lift objects 50+ pounds
Able to work in extreme outside climates
Work in confined spaces and at extreme heights – 250-300 ft +/-
Unrestricted range of motion
Able to pass a respirator fit test
Able to work in a fall arrest harness
Working 12hr days 7 days a week when on a job site
Possession of or ability to obtain a passport for international work (preferred)
Ability to travel without restriction in the US
Competent in reading a tape measure
Competent in the use of general hand tools and power tools

Your Professional Experience Should Be…

Possess beginning to working knowledge of subject matter
2 years of experience in a welding, fitting, or construction capacity (Preferred)
Welding certifications (Preferred)
Stainless Steel TIG Welding (Preferred)

Chart is an equal opportunity employer...

Need an Accommodation...

Sandblaster (McCarran, NV, United States, 89434)

Ensuring Chart’s Success…

Chart’s Production Generalists are critical for sandblasting cryogenic units to prepare them for painting using different preparation materials and blasting equipment as one of the final steps in the manufacturing process. Chart’s McCarran, NV location currently has an opening for a blaster.

What Will You Do?

Prep units prior to painting using a blasting booth and other hand preparation methods

Prime units prior to painting using a spray paint application

Perform necessary touchups when needed

Perform maintenance on blast booth

Adhere to printed work instruction manuals

Observe and practice safety procedures and policies, participate in department safety meetings and initiatives

Other duties and responsibilities as assigned by manager

Your Physical Work Environment Will Require…

Frequent standing, sitting, walking, bending, stooping, twisting and occasional crawling

Frequent heavy lifting, pushing, pulling, and material handling

The ability to work overtime and some Saturdays as needed

Your Experience Should Be...

Previous blast experience in a manufacturing environment preferred

Previous experience in a shop, manufacturing or fabrication environment

Our Benefits Package...

- Competitive salary and benefits package

- Health, dental, and vision insurance

- Retirement plan

- Paid time off and holidays

- Opportunities for professional development and advancement

Control Engineer (Rheden, Gelderland, Netherlands, 6991 GS)

The Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for a Control Engineer, who will join our engineering team and will support in making a valuable difference in the century to come.

In the project, the Control Engineer is responsible for the operational integration of our compressor systems in our client processes by designing the control system and control philosophy, and detailing this out in required engineering deliverables . Besides contributing in projects the project engineer provides expert inputs in sales support, continuous improvement and has direct impact thru standards and continuous improvement in there own working areas

What Will Your Responsabilities Be?

Correct technical implementation in accordance with established requirements. Correct selection of products.
Carrying out the work according to project planning.
Timely processing and delivery of documents (content and quality).
An optimum price/quality ratio for HTC for the compressor installation within the set customer requirements.
Responsible for the compressor control during acceptance testing both at the supplier and in the field. Assisting purchasing and QHSE with regard to the technical assessment of new suppliers.

What would we like you to bring?

Bachelor in engineering
Technical knowledge of and experience in control technology
Knowledge of control panel hardware and visualization software
Knowledge of electrical wiring diagrams
Knowledge of process technology
Good communication skills
Fluency in English
Willing to travel 20-40% of the time

About Howden, a Chart Industries Company

Mass Spectrometer Technician (McCarran, NV, United States, 89434)

Ensuring Chart’s Success…

Chart's McCarran, NV location is currently seeking a skilled and detail-oriented Helium Leak Testing Technician to join our team. The successful candidate will be responsible for performing helium leak testing on vacuum insulated cryogenic storage tanks and trailers. This position requires proficiency in TIG welding and the use of grinders and various hand tools to ensure the highest standards of quality and safety.

What Will You Do?

- Conduct helium leak testing on vacuum insulated cryogenic storage tanks and trailers to ensure integrity and safety.

- Perform TIG welding on stainless steel and other materials as required for repair and maintenance of tanks and trailers.

- Utilize grinders and hand tools to prepare surfaces and complete welding tasks.

- Follow detailed testing procedures and protocols to identify and repair leaks.

- Record and report test results, ensuring all documentation is accurate and up-to-date.

- Maintain and calibrate testing equipment to ensure reliable and accurate results.

- Adhere to safety standards and protocols, including wearing appropriate PPE and following all safety guidelines.

- Collaborate with engineering and quality assurance teams to resolve any issues related to leak testing and welding.

- Assist in developing and refining testing procedures and protocols to improve efficiency and effectiveness.

- Provide training and guidance to junior technicians as needed.

Your Physical Work Environment Will Require…

- Work is performed in a workshop or manufacturing environment.

- Exposure to noise, fumes, and other hazards associated with welding and industrial testing.

- Use of personal protective equipment (PPE) is required.

Your Experience Should Be...

- High school diploma or equivalent; technical certification or associate degree in a related field is preferred.

- Proven experience in helium leak testing and TIG welding, particularly with vacuum insulated cryogenic storage tanks and trailers.

- Proficiency in using grinders and various hand tools.

- Strong attention to detail and excellent problem-solving skills.

- Ability to read and interpret blueprints, schematics, and technical manuals.

- Good communication skills and the ability to work both independently and as part of a team.

- Knowledge of safety standards and procedures related to welding and leak testing.

- Physical ability to perform the duties of the job, including lifting heavy objects and working in confined spaces.

Our Benefits Package...

- Competitive salary and benefits package

- Health, dental, and vision insurance

- Retirement plan

- Paid time off and holidays

- Opportunities for professional development and advancement

Shop Helper Temporary (Valencia, CA, United States, 91355)

Ensuring Chart’s Success…

What Will You Do?

Temporary poisition expected to last until 09/19/2025

Job duties for the Shop Helper:

Keep chip barrels empty.

Keep all 3 buildings tidy and clean. (including sweeping floor)

Light maintenance. (clean machines, keep air compressor oiled and drain as needed…)

Assist with moving parts between buildings. (forklift experience preferred)

Assist with receiving and inventory.

Shop Helper

Support various shop functions including shop maintenance, clean machines, oil air compressors and drain as needed. Empty chip barrels, sweep floors and keep shop tidy and organized. Assist with material handling with forklift. Assist with shipping/ receiving and inventory control. Other duties as needed.

Your Physical Work Environment Will Require…

Your Experience Should Be...

1+ years working in a machine shop and/or other manufacturing shops

1+ years of forklift experience

Team player

Organized

Our Benefits Package...

$35 HOURLY

Supplier Quality Engineer (The Woodlands, TX, United States, 77381)

Ensuring Chart’s Success…

"Cooler By Design” – Chart’s core business is centered around the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the products we design and build are pretty cool too. Also, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out – all the way from conceptual design to installation and commissioning of equipment on-site. Chart’s mission is to provide full solutions across the Nexus of Clean™ – clean power, clean water, clean food, and clean industrials. The diverse applications we service echo our commitment to sustainability – from providing full hydrogen solutions across the value chain, offering small and industrial scale carbon capture solutions to customers globally, creating water treatment systems responsible for treating 4.5 billion gallons of water per day in the U.S. and delivering clean water to over a billion people worldwide, providing equipment and solutions for mission critical space launches, decarbonizing the marine industry, and electrifying the mining space. Chart even contributes to the food and beverage industry by making some of your favorite carbonated beverages possible – If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)!

Chart Industries is looking for a Supplier Quality Engineer for our office in The Woodlands, TX. We are open to a hybrid schedule for this role. The supplier quality engineer is responsible for ensuring adherence to quality and technical requirements for assemblies and components sourced within the Chart E&C supply chain.

What Will You Do?

Providing technical expertise in quality assurance, quality control, inspection and requirements on purchased parts for LNG / process equipment for cryogenic gas plants, piping and skidded systems
Analyzing quality and dimensional data including feedback and corrective action analysis
Evaluating suppliers, conducting assessments for overall quality systems (ISO 9001/equivalent), capability, work processes and continuous improvement, identification and resolution of non- conformances, corrective and preventive actions
Providing supplier development training concerning quality improvement, effective quality management systems, and optimizing scorecard performance
Working with internal cross-functional teams for capture and implementation of best practices
Participating in internal and customer audits, driving findings to closure in a timely manner
Review and validate actions on inspection reports
Review of drawings, P&IDs, data books, welding procedures, material test reports, and supplier testing procedures for compliance to specifications
Perform P&ID walkdowns, review fabrication and supplier testing practices for inspection release
Ability and willingness to travel without restrictions domestic and/or international, approx. 55%

Your Experience Should Be...

Bachelor’s degree in Chemical, Mechanical, Industrial Engineering discipline or related field
Minimum 5 years’ experience in supplier quality, field services, or engineering
Excellent communication skills, both written and oral
Self-starter with capability to work in a dynamic team environment
Basic knowledge of Six sigma, Apollo root cause methodology
In depth knowledge of ASME B31.1, B31.3, and BPVC codes and standards
Familiarity with NFPA, CSA, and OHSA requirements
General knowledge of welding practices a plus

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

CNC Machinist (Night Shift) (Stafford, TX, United States, 77477)

Ensuring Chart’s Success…

What Will You Do?

This department manufacturers metallic and non-metallic precision components using 3 to 5 axis CNC lathes and mills. The work area is indoors in a manufacturing facility and is temperatures controlled.
Operators:
- Are responsible for the setup and operation of the applicable CNC machine.
- Are responsible for following defined work procedures and engineering standards.
- Must be able to completely fill out inspection reports and take personal ownership of quality.
- Are responsible for completing OPM (operator preventative maintenance).
- Are responsible for following all safety protocols and wearing required PPE.
- Are part of a department team and need to work well with others.
- Must work safely and efficiently with minimum supervision.
- Must be able to use complex equipment.
- Must be able to make minor decisions and ask identifying questions.
- Will learn and use the business ERP system to track and process production jobs.
- Are expected to support 5S principles such as a clean and orderly work area.
- Must be able to work overtime or weekends as needed.
- Are expected to perform any other assigned duties as directed by management.

Your Physical Work Environment Will Require…

Majority of work shift is spent standing.
Lift and move up to 50 pounds. Above 50 pounds requires lifting equipment.
Frequent bending, stooping, pulling, and pushing.
Good vision for close and distance with ability to focus.

Your Experience Should Be...

Must be able to read proficiently and write legibly.
Must be able to respectfully communicate.
Must have demonstrated good job performance and good attitude.
Must be a team player.
Ability to understand and promote the business safety standards and guidelines.
Experience as a CNC machinist is preferred.
No travel requirements. May be invited to travel for training opportunities.

Our Benefits Package...

Sourcing Project Manager (Chennai, Tamil Nadu, India, 600077)

Ensuring Chart’s Success…

What Will You Do?

Lead and monitor the end-to-end purchasing status of localization projects in India
Act as the interface between Strategic Sourcing, purchasing, engineering, project management, quality, logistics, and suppliers to ensure project milestones are met.
Track and report project KPIs including cost, timeline, supplier readiness, and risk mitigation.
Support supplier onboarding, technical reviews, and industrialization planning.
Ensure alignment with internal stakeholders on specifications, delivery schedules, and quality requirements.
Identify and escalate risks or delays, and drive resolution through cross-functional collaboration.
Maintain detailed project documentation including Project plans, cost curves and status dashboards for management reporting.

Your Experience Should Be...

Bachelor’s degree in Mechanical/Production Engineering or related field.
10+ years of experience in sourcing and/or project management within heavy engineering, automotive, or capital goods industries.
Good knowledge of Casting, Forging, Sheet Metal
Deep understanding of make-to-order manufacturing, especially heavy castings (sand, investment), forgings (open/closed die), and precision machining.
Proven experience in supplier development, localization, and industrialization.
Strong project management skills with proficiency in tools like MS Project, Excel, or ERP-based tracking systems.
Excellent communication, stakeholder management, and problem-solving abilities.
PMP or equivalent project management certification.
Background in a compressor manufacturing company would be appreciated
Experience working with global teams and suppliers.
Familiarity with cost modelling, APQP, and PPAP processes
Hands on experience in CAPEX/Logistics sourcing

Accounts Receivable Specialist (Budapest, Budapest, Hungary, 1083)

Ensuring Chart’s Success…

The main role purpose is to manage the SSC AR processes making sure Howden a Chart Industries Company meets all partner and customer requirements in a timely manner, as well as maximising cash flow, while minimising aged debt and improve Accounts Receivables processes by supporting our dedicated Local Business Unit(s) and serve own portfolio.

What Will You Do?

Preparing invoicing report and requesting approvals (where needed) from project managers
Raising invoices and credit notes on a daily basis
Sending out invoices and credit notes to customers
Solving invoicing related issues
Stakeholder management: close collaboration with project managers in LBU and with AR Collection team
Tracking all billing activity in invoice report, commenting status on to-be-invoiced projects
Adhering to 24 hour SLA and commenting reason of delay when necessary
Report generation right first time on time
Develop a good relationship with cross-functional teams (e.g. LBU, AP, FA, IT)

Your Experience Should Be...

University or college degree
Basic knowledge of finance processes
Experience and understanding of major ERP systems
Fluency in English
Strong Excel skills

Our Benefits Package...

Health and Quality of Life benefits:

Competitive salary and a generous cafeteria bonus
Private Medical Insurance package with Medicover.
Life Assurance package with NN Group Life
Home office allowance, extra holidays, employee recognition initiatives, well-being initiatives and team buildings

Development Opportunities:

Constant learning opportunities and challenges that help our employees grow
Vertical and horizontal organizational movement
Semester-based language course.
Professional practice and free e-learning opportunities

Flexible and supportive working environment:

Our new and modern office is in the heart of Budapest at the corporate centre in Corvin Negyed behind the Corvin plaza: Budapest, Bókay János u. 44, 1083

Hybrid schedule (3-4 days at home, 1-2 days at the office)
Non-binding working hours
Commuting allowance for those residing outside of Budapest
Showering facilities for cyclists and sportspeople
Workplace extras to facilitate working at the office: free coffee and different beverages, fruit day, a social corner
State-of-the-art technology and IT equipment: laptop, headset, workstation, 2 monitors per employee, Windows and O365 software
Accommodation for special needs and those with a physical disability
Global diverse community where people can support and learn from each other, celebrate successes and have fun in team buildings and programs.
Opportunity to be involved in our ESG “Bright Future” initiatives

Aftermarket Application Engineer (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

“Cooler Together” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so that’s how we got our “Cooler By Design®” tagline. Of course, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers and strive to work together as a team, making us “Cooler Together”. With our recent acquisition of Howden, we’re also “Stronger Together”. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. Chart is looking for bright, talented candidates that have a desire for a career in an exciting and evolving industry.
Chart Industries Company is currently seeking for an on-site Aftermarket Application Engineer based in Stafford, TX. This role supports in the design, development and modification of computer applications and programs. Write technical specifications to design or redesign computer solutions. Participate in overall systems testing.

What Will You Do?

• Determine scope of work for a project. Prepare project documentation such as technical specifications, proposals, pricing and schedules for turbo-expanders, turbo-compressors and related equipment while ensuring total customer satisfaction.
• Train and assist customers as needed on a technical level.
• Some domestic and international trips may be required.

Your Physical Work Environment Will Require…

A mixer of office, shop and field environments.

Your Experience Should Be...

• Experience in Rotating equipment.
• Strong Mechanical technical aptitude.

• B.S. in Mechanical Engineering or related Technical degree.
• 1-3+ year’s experience in bid/proposal preparation and the ability to read and understand technical and commercial specifications.
• Competent in reading technical drawings including P&IDs & Wiring Diagrams
• Experience with API & ASME codes.
• Expertise in Gas Dynamics / Auxiliary System Design / Control & Electrical or Mechanical Design a big plus.
• Knowledge of computer software: AutoCAD, SolidWorks, PowerPoint, MS Word, MS Excel, MS Project, ACT.
• Experience in the Oil & Gas is a plus.
• Experience in Risk Assessment analysis a plus.
• Strong communication skills to interface with internal personnel and external customers.
• Self starter who can work independently.

This position is not eligible for sponsorship.

CNC Machinist/Machine Operator (Windsor, CT, United States, 06095)

Ensuring Chart’s Success…

We are currently seeking a CNC Machinist/Machine Operator based at our Windsor, CT location.

What Will You Do?

o   Perform tests and troubleshoot performance, leaks and aesthetics of all Spencer blower and vacuum products.
o   Maintain documentation as per established quality standards and engineering test specification.
o   Perform trim balance.
o   Work with a variety of calibrated gauges not limited to vibration meters, temperature probes, volt, and amp meters.
o   Set up and break down of test fixtures using hoists, forklifts, or other material handling equipment.
o   Work with variable frequency drives.

Set up and operation of fabricating machines, such as shears,
Brakes, rollers, saws, seam welder, plasma cutter and punch press.
Verifies conformance of work pieces to specification, using square, ruler and measuring tape.
Maintain a safe, clean, and orderly work area.
Follow all safety rules and regulations.

Your Physical Work Environment Will Require…

Wear proper PPE for the job
Standing long periods of time
Able to lift 30lbs min
20/20 vision

Your Experience Should Be...

High School Diploma, or GED
Ability to lift up to 25lbs
Must possess mechanical aptitude
Must be able to pass Drug Screening
Current and valid certification a plus
Ability to work overtime if needed.

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Electrical Control Technician (Duluth, GA, United States, 30096)

Ensuring Chart’s Success…

Chart Water, a Chart Industries Company is seeking an Electrical Controls Technician position at our Duluth, GA location.

What Will You Do?

Integrate industrial control panel, electronic, pneumatic, and hydraulic components for automated water treatment equipment and pump controls.

- Wire electrical panels and electrical devices using small hand tools and measuring devices.

- Point to point panel QA/QC.

- Read and understand assembly drawings.

- Continue to build technical depth of Chart water processes.

- Panel integration and wiring to systems on shop floor.

- Wire components, panels, and assemblies, including PLC's, motors, drives and power supplies.

- Assist with equipment installation.

-Analyzes and interpret test information to resolve design related problems

-Document findings

- Other duties, as assigned.

Your Physical Work Environment Will Require…

- Frequently required to use hands to finger, handle, or feel objects, tools or controls and climb or balance.

- Occasionally required to walk; reach with hands and arms; kneel, crouch or crawl; hear and talk.

- Regularly life and move up to 10 pounds, frequently lift and move up to 25 pounds and lift and move up to 50 pounds.

- Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus.

Your Experience Should Be...

2+ Years

High School Diploma or GED.
Technical School

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance

Applications Engineer (Valencia, CA, United States, 91355)

Ensuring Chart’s Success…

L.A. Turbine, A Chart Industries Company designs and manufactures application-specific, highly engineered turboexpanders that are used in hydrocarbon processing, geothermal power generation, and other power-recovery or refrigeration applications in industrial processes worldwide. Expert field service, repair, and spare parts are available for all types of turboexpanders.

The company’s operation is vertically integrated with broad engineering expertise and analytical competency, multi-axial CNC machining capability, mechanical assembly, PLC and electrical assembly, complete metal fabrication, and testing facilities that include resonance, balancing, pressure, performance, and mechanical run test.

Position Summary: This position functions as a primary technical resource for the field sales force and is responsible for actively driving and managing the technical and commercial evaluation of the inquiry to order process. Working in conjunction with the sales and engineering team as the key technical advisor and product advocate, the Application Engineers must be able to identify and provide reliable solutions for all technical and commercial issues to assure complete customer satisfaction through all stages of the sales process.

What Your Day-to-Day Activities Will Be…

Receive and review customer specifications for technical and commercial requirements for new equipment projects while developing and aligning proposals for centrifugal turbo-expanders, turbo-compressors, and related equipment and services to generate competitive technical and commercial proposals to the customer to successfully secure new and repeat business opportunities.
Perform technical review of customer/project specifications and identify and rationalize requirements outside of our standard scope/design to ensure the product/proposal package is designed to meet agreed-upon specifications.
Perform calculations and product selections to most efficiently and effectively meet the customer’s process needs.
In conjunction with the Commercial / Sales team, pursue and lead technical and commercial proposal / design concept communications and meetings with the customer in order to steer preference and acceptance of proposed solutions, while seeking out Voice of the Customer feedback in order to better refine or modify the proposal / design concept offerings.
Lead and drive the internal proposal process throughout the sales phase between inside and outside sales personnel and representatives, project management, design engineering, aftermarket, and supply chain. Requires interaction and leadership with other internal and external partners concerning all aspects of the proposal process including engineering, quality, logistics, scheduling, spare parts, field services, legal, and sub suppliers to ensure proposals account for all aspects of internal costs, resources, scheduling, commercial, and legal needs.
Accountable for performing applications engineering and sales activities to meet applicable KPIs such as bookings value, bookings margins, OTD, and proposal pipeline in line with company goals.
Promote and practice proper safety procedures and personal protection equipment
Maintain expert level of product knowledge and application.
Articulate technology and product positioning to both business and technical users.
Provide design and specification development support to consultants, integrators, and distributors.
Respond to functional and technical elements of RFIs/RFPs
Listen, understand, and convey customer requirements.
Perform technical/ product training for salespeople, estimators, and engineers at targeted accounts.
Assist in the design and development of new products and tools necessary to make target accounts comfortable and successful at selling.
Maintain accurate records of target accounts, opportunities, quotes, projects, contacts, and correspondence in company approved databases and Salesforce.
Resolve customer issues or difficulties in a manner that is consistent with the company mission, values, and financial objectives.
Maintain professional business relationships within target accounts.
Provide status of ongoing projects and future projects.
Identify customer's needs and sales opportunities to help future growth.
Other duties as assigned.

Your Education Should Be…

BS in Engineering or another related field.
Experience in centrifugal air/gas turbo-expander/turbo-compressor / turboexpander-gear-generator or other rotating equipment
5 years of experience in bidding/proposal preparation and the ability to read and understand bid/proposal specifications, both from a technical perspective and commercial perspective, as related to Contractual Terms and Conditions

Your Physical Work Environment Will Require…

While performing the duties of this job, the associate is regularly required to stand, walk and/or balance use hands and fingers to type, handle, feel, grasp, pushing, and pulling. The individual is frequently required to reach with hands and arms and talk and hear, operate office equipment (computer, copier, scanner, phone, etc.) and repetitive motion. The individual is occasionally required to climb, stoop, kneel, or crouch. The individual may occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus. This position is subject to an office environment and rare occasions to an uncontrolled manufacturing shop with environmental conditions, which could expose associate to noise and oils as well as subjected to hazards such as, but not limited to, moving parts and vehicles, heat and chemicals.

Your Professional Experience Should Be…

Competent in reading technical drawings including P&IDs
Experience with API & ASME codes
Expertise in Gas Dynamics / Auxiliary System Design / Control & Electrical or Mechanical Design a big plus
Knowledge of computer software: AutoCAD, SolidWorks, MS Word, MS Excel, MS Project
Experience in the Oil & Gas, Air Separation and Power Generation required
Experience in Risk Assessment analysis a plus
Strong communication skills to interface with internal personnel and external customers
Self starter who can work independently without close supervision

Chart is an equal opportunity employer...

Salary $130,000 - $160,000

Need an Accommodation...

Regional Sales Manager - Water (Chesterfield, England, United Kingdom, S42 5UY)

The Role

The Regional Sales Manager (RSM) will work alongside a pre-existing RSM within the UK Water Market. Working in a collaborative team driving the existing Aftermarket strategy for the UK Water Market, driving growth, customer focus, and innovation. This position is crucial in expanding Howden's influence and product offerings within the sector, creating long-term partnerships with UK water utilities. With a special focus on maintaining and increasing the installed base of compression systems, and introducing new products within Aeration and contamination, the RSM will play a pivotal role in driving revenue and securing a greater market share.

Aftermarket Growth: Contribute towards the expansion of Howden’s service and maintenance offerings for the UK’s aging compressor fleet, targeting utilities across the UK and maximising the potential revenue of $7-8M annually.

New Product Introduction: Introduce and promote Howden’s CubusTurbo and Chart Water products, ensuring availability and competitive pricing to secure sales growth and open up additional revenue streams.

Customer Relationship Management: Develop and maintain strong relationships with water authorities to drive both service retention and new installations, while actively engaging in cross-selling and upselling opportunities across Howden's product portfolio.

Strategic Expansion: Contribute to Howden’s long-term growth strategy by identifying new market opportunities, securing major projects, and executing key initiatives within the water market.

Who are we?

What will you do?

Identify high priority customers and opportunities that will deliver the budgeted bookings for the Market assigned.
Extensively visit Water Authorities and Water sites throughout the UK and Ireland.
Work Collaboratively within an existing team following agreed sales strategy
Develop existing clients and identify potentially new clients through direct contact and in giving presentations in the companies’ products and capabilities.
Solicit enquiries for the supply of aftermarket turbo compressor parts and services, influencing clients where possible to specify Howden.
Manage and assist in the preparation of tenders and further clarification of clients and company requirements.
Lead team on preparing, securing and managing any major projects, re-vamps re-rates and upgrades.
Negotiating contracts with clients while maintaining agreed contribution levels.
Ensure negotiated contracts are correct and of sufficient detail to pass to the Project Manager for execution.
Identify and report on new market opportunities for our products.
Support the marketing function through reports, client interface, and intelligence data gathering.

What do you bring?

An ideal candidate would likely have the following profile:

Bachelor’s Degree in a Business, Engineering or related field or experience commensurate with a degree.
Significant relevant business experience including sales, marketing, product management, engineering, product development and/or field service.
Strong product knowledge and experience of rotating equipment.
Industry experience in the Water Market.
Experience of UK and Ireland sales and an understanding of the diversity and cultural differences and how to operate effectively in the region.
An intimate knowledge of rotating equipment as utilized in air and gas handling.
Experience selling highly engineered equipment and products, as well as services.
Ability to create and maintain strong relationships with customers, reps and internal customers.
Strong interpersonal skills, negotiation and customer issue resolution skills.
Proficient in use of CRM.

Our Benefits Package

A flexible, hybrid working environment
Generous holiday entitlement package totalling 33 days annual leave
Car Allowance
Bonus
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunities employer

Facilities Technician (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Repairs and maintains an organization's facilities, systems, or equipment

What Your Day-to-Day Activities Will Be…

Receives work order requests for facilities maintenance from employees, tenants, customers, or other visitors.
Ensures work is performed in a timely manner, and triages requests to prioritize the most critical repairs.
Inspects and performs preventative maintenance or as-needed repairs on facilities or systems, which may include mechanical or electrical systems, HVAC or other environmental management systems, generators or power management systems, or fire or safety systems.
Makes basic repairs and coordinates the work of specialists when more complex repairs are needed.
Schedules maintenance or repairs to minimize disruptions to organizational operations wherever possible.
Performs work under direct supervision.
Handles basic issues and problems, and refers more complex issues to higher-level staff.
Possesses beginning to working knowledge of subject matter.

Your Education Should Be…

High school diploma or equivalent work experience
0 - 2 years of experience in facilities maintenance

Your Physical Work Environment Will Require…

INTERACTION:

Works with Lead/Supervisor

WORKING CONDITIONS:

Mostly Outdoor/Shop Environment
Must be able to work outdoor and indoor

PHYSICAL REQUIREMENTS:

- Walking
- Standing
- Using hands
- Bending
- Lifting
- Sitting
- Climbing
- Ability to stand for long periods of time.
- Ability to lift/move heavy objects

Your Professional Experience Should Be…

Ability to work as part of a team.
Problem-solving skills.
Technical expertise.
Ability to meet deadlines.
Painting
Dry wall repairs
Basic plumbing
Yard mowing/weed eating and yard clean up
Parts runner – must have valid driver’s license

Chart is an equal opportunity employer...

Pipefitter/Rehab Welder (New Prague, MN, United States, 56071)

Ensuring Chart’s Success…

Chart’s Experienced Pipefitter/Rehab Welder position in our New Prague, MN Repairs Facility plays a key role in the manufacturing process of Chart’s products. Chart produces and rehabilitates high quality manufactured products using radiography, vacuum mass spectrometry, and phased array ultrasonic testing. Chart complies with ASME, DOT, AAR, and EN pressure vessel codes. If you have experience dedicated to replumbing vessels, structural welding and/or pipefitting and repair then we encourage you to apply!

What Will You Do?

Operation of cranes, forklifts, and aerial lifts
Replumbing and Welding of vessels through established manufacturing processes with minimum instruction and minimum supervision
Perform complete welding and finishing operations for the repair of units (vertical, horizontal or mobile).
Accurately maintain required records (production traveler, material traceability, and production records).
Maintain cleanliness of assigned work area
Monitor equipment functionality and report maintenance needs
Assist other new welders in learning welding skills
Complete and follow all safety procedures and policiesComplete company provided training to effectively perform required job responsibilities
Other work as assigned

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling
Frequent pushing, pulling and handling of material
Occasional climbing and working at elevated positions
Repetitive hand movements during welding operations

Your Experience Should Be...

Proficient in all positions with GTAW and GMAWProficient in knowledge of blueprint reading and welding symbols
Proficient in welding best practicesProficient in visual inspection
Computer skills, web browser
Readily takes action on challenges and with flexibility as priorities change and a “can do” attitude
Encourages the open expression of diverse ideas and opinions
Attentively listens to others
Knows strengths, weaknesses, opportunities and limits
Admits mistakes and gains insights from experiences
Uncovers root causes to drive continuous improvement
Accepts assignments that broaden capabilities

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Electrical Control Tech II (Duluth, GA, United States, 30096)

Ensuring Chart’s Success…

Chart Water, a Chart Industries Company is seeking an Electrical Control Technician II position at our Duluth, GA location.

What Will You Do?

Wire electrical panels and electrical devices using small hand tools and measuring devices
Point to point QA/QC
Read and understand assembly drawings
Continue to build technical depth of Chart water processes
Panel integration and wiring to systems on shop floor
Wire components, panels and assemblies including PLC’s motors, drives and power supplies
Test functional performance to ensure wiring and assemblies are operational

Your Physical Work Environment Will Require…

Regularly required to sit
Use hands to finger
Handle or feel objects, tools or controls
Stand, walk, stoop, kneel, crouch, crawl, or climb ladder
Ability to stand and/or walk up to 8-10 hours a day
Able to lift up to 50lbs

Your Experience Should Be...

2 plus years’ experience

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Electrical Control Technician III (Duluth, GA, United States, 30096)

Ensuring Chart’s Success…

Chart Water, a Chart Industries Company is seeking an Electrical Controls Specialist position at our Duluth, GA location.

What Will You Do?

Deliver technical services and support to end-users for all company products
Interact with customers to obtain, provide and process information in response to inquiries, concerns, and requests about products and services
Prepare quotes for parts / service needs
Research required information using available resources
Follow standard processes and procedures
Identify and escalate priority issues per client specifications
Redirect problems to appropriate resource
Stay current with system information, changes and updates
Effectively manage large volume of customer interaction
Train new hires and team on new build(s)
Create standard work instructions

Your Physical Work Environment Will Require…

Sitting for long periods of time working on a computer
Walking through the production floor

Your Experience Should Be...

3 Plus years’ experience
Must have mechanical aptitude
Ability to speak and write clearly and accurately; demonstrated proficiency in typing and grammar

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Project Manager - HLNG (Sri City, Andhra Pradesh, India, 517 646)

Ensuring Chart’s Success…

The role will own product commercialization for the liquid hydrogen, Oxygen, Nitrogen, Argon and Carbon Dioxide transport trailers. Actual work location is flexible, primary resources are in Theodore AL and New Prague MN. Responsible for all aspects of the product line including identification of products and design, customers, pricing, working with sales for targeted selling and marketing, ensuring quality product performance, and customer support.

Successful candidates will have an entrepreneurial mindset to articulate the market’s transport needs and create a plan to fill the gap.

What is the Liquid Hydrogen and Industrial Gas Transport Product line…

A regulatory approved transport system that safely and efficiently transports cryogenic liquid over public roadways.
The system utilizes cryogenic liquid tanks and trailers designed for movement by a variety of commercial semi-truck tractors. It can include liquid cryogenic rail cars.
The system must be thermally efficient to minimize liquid evaporation rate during transport. It must also incorporate all jurisdictional required safety components and functions.

What Will You Do?

Create segment vision and provide strong leadership to bring products to market across a matrixed organization.
Manage segment P&L.
Forecast orders, sales and margins through the AOP process and monthly forecast process.
Ensure manufacturing plans will support business growth needs.
Work with global Hydrogen team members in US, Europe and Asia to fine tune our product offerings, manufacturing capabilities and targeted selling approach.
Work with domestic commercial team members on an industrial gas trailer product line strategy.
Support the Product Funnel and 5-Phase Product Development Process.
Collaborate with product development Program Managers in the execution of pilot projects.
Coordinate with Marketing to develop and maintain a marketing plan for the segment
Develop pricing strategy that wins market share and maximizes profitability.
Partner with the sales team in facilitating product presentations and addressing RFIs and RFQs.
Develop a product and aftersales support plan, with the mindset of generating revenue through this channel.
Cultivate and maintain relationships with customers, salespeople, engineers and site operations personnel.

Your Experience Should Be...

5+ years product, project or business management experience
3-5 years’ experience with mechanical, cryogenic or related fuel system products preferred.
Experience successfully launching new products.
Product development and commercialization experience within the energy market is an advantage.

Be available to travel up to 25% of the time.
Proficient with Microsoft Office applications, Salesforce CRM, and JD Edwards E1 MRP system
Must be a self-starter able to work in a fast paced, rapidly changing environment.

Your Physical Work Environment Will Require…

Bachelor’s degree from a four-year college or university majoring in engineering, marketing or business management.

Key Behaviors of Success…

Nimble learning
Business acumen
Balancing stakeholders
Effective communicator
Perseverance
Strategic mindset
Drives vision and purpose

Programmer Analyst I (Hyderabad, Telangana, India, 500 081)

Ensuring Chart’s Success…

Chart Industries, Inc. (NYSE: GTLS), incorporating Howden, is a global manufacturer of highly engineered cryogenic and compression equipment servicing multiple applications in the clean energy and industrial gas markets. Our unique product portfolio is used in every phase of the liquid gas supply chain, including upfront engineering, service and repair.

What Will You Do?

The successful candidate will have proven programming experience, the ability to develop and implement current engineering practices, and the ability to provide detailed documentation following project completion. They will join a diversified team and work closely with sales and engineering to offer the best application to our customers.
Main responsibilities:
As an Engineering Software Developer, you will design, develop, test and maintain Howden's portfolio of engineering software applications that support the global business;
You will produce and present user support documentation for the programs and provide technical support to the engineering and sales teams as required;
You will deliver fully functional products within agreed and demanding timeframes, and analyze and define user requirements through interviews and workshops;
You will be responsible for software development within a small team. This includes all work: creating new applications, adding new functionality to existing applications, automated testing, customer installations and debugging. The incumbent will have to master both the design of user interfaces and the creation of back-end logic components. Most of the work will be done in the .NET environment using C#.

Your Experience Should Be...

> Undergraduate degree in software engineering or College degree in computer science with good experience;
>Equivalent technical experience also considered;
> Minimum of five years’ experience in a similar position;
> Extensive experience working with C#
> Experience with the following: Microsoft Visual Studio; Git-based release management; Desktop WinForms Applications; .NET Framework; SQL databases;
> Demonstrate a structured approach in design, development and enhancements of our software
> Create innovative and efficient code
> Ensure best code industry practice
> Ability to communicate effectively and build relationships with team members;
> Ability to analyze and use data without getting lost in the details; very good organizational skills
> Ability to manage and prioritize multiple tasks in a fast-paced environment;
> Initiative and autonomy; Creative thinking.

Our Benefits Package...

> Competitive compensation;
> Group insurance, provident fund plan with employer contribution;
> Dynamic and growing company in a stimulating work environment; Ongoing training;

Rigger (McCarran, NV, United States, 89434)

Ensuring Chart’s Success…

We are looking for an experienced Rigger to join our team at our cryogenic repair facility. The Rigger will be responsible for safely lifting, moving, and positioning heavy cryogenic bulk tanks, trailers, and related components. This role is critical to ensuring that all equipment is handled with precision and care during inspections, repairs, and installations.

What Will You Do?

• Safely rig, lift, and move cryogenic tanks, trailers, and equipment using cranes, hoists, and other rigging tools.
• Inspect rigging equipment and ensure it is in good working condition before use.
• Calculate load weights and ensure proper rigging techniques are applied to prevent damage or accidents.
• Collaborate with the repair team to position equipment for maintenance or installation tasks.
• Follow all safety protocols and guidelines for handling heavy and delicate equipment.
• Maintain detailed records of rigging operations and equipment inspections.
• Assist in other facility operations as needed, including general maintenance and support tasks.

Your Physical Work Environment Will Require…

Ability to lift and carry up to 75 lbs.
Comfortable working in outdoor and industrial environments.
Exposure to cryogenic materials and equipment; proper safety training and gear will be provided.
Regular use of heavy machinery and tools in a fast-paced industrial setting.

Your Experience Should Be...

Experience:
• Proven experience as a rigger, preferably in an industrial setting.
• Familiarity with lifting and rigging heavy equipment, including tanks and trailers.

Certifications:
• Certification in rigging or crane operation is highly desirable.
• OSHA certification or equivalent safety training preferred.

Skills:
• Strong understanding of load calculations, rigging techniques, and equipment capacities.
• Ability to operate cranes, hoists, and other lifting equipment with precision.
• Excellent communication and teamwork skills.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Safety Coordinator (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

What Your Day-to-Day Activities Will Be…

Directs, develops and oversees general safety policy and procedures
Ensures the workplace is in compliance with OSHA and other state, local or industry specific regulations
Manages the Safety and Health function to meet our Safety Policy
Responsible for the promotion of Safety and Health of the Beasley Operation
Ensures Safety Audits are conducted on a weekly basis and provides management with metrics to improve
Participates and/or leads incident investigations for compliance to safety standards
Adapts to operational needs and addresses immediate concerns of the manufacturing environment
Plan and direct safety orientation, skills trainings, emergency plans and job specific safety training
Collects and analyzes safety related data to reduce and prevent workplace accidents and improve overall facility safety record
Manage Safety team and budget

Your Education Should Be…

Minimum Education:

Bachelor’s degree in Health and Safety or similar degree preferred. In lieu of not having a bachelors degree, additional 2 years of Safety Experience for associates or an additional 4 years of safety experience with no degree.

Your Physical Work Environment Will Require…

WORKING CONDITIONS:

Moderate Indoor Office Environment
Moderate Outdoor/Shop Environment
Noisy/Loud Shop Environment

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:

Safety Glasses
Steel Toe Shoes
Ear Plugs
Hard Hat (when needed)
Gloves (when needed)
Face Shield (when needed)

Occasional exposure to

Heights
Confined spaces

PHYSICAL REQUIREMENTS:

While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands; and reach with hands and arms.

Your Professional Experience Should Be…

Minimum Experience:

5-8 years related experience and/or training in a manufacturing industry. Management experience in Health and Safety required.

Skills Required (i.e. certifications, licenses, registrations, etc.):

Leadership
Problem Solving/Analysis
CSP, CSM, or other related Safety Certification
OSHA 10 hour and 30 hour general industry trainer certification highly desirable

Chart is an equal opportunity employer...

Need an Accommodation...

Shipping Receiving Clerk (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

What Will You Do?

Support loading and unloading Shipping and Receiving dock.
Ensures the receipts and paperwork for products, supplies, and materials.
Ensures all products, materials, and supplies are transacted properly.
Collaborates with drivers, vendors, internal and external customers professionally.
Communicates through the entire shipment and logistical process of all finished products.
Supports the production team on necessary shipment and logistical processes.
Maintains a progressive, productive, positive, and collaborative work environment.

Operates pallet jacks, forklifts, etc., to transport products, materials, and supplies.
Performs all computer and systemic functions needed.
Maintains safe, clean, and organized work areas.
Inspects incoming materials and supplies for accuracy, damage, and imperfections.
Properly reports and documents shipment discrepancies and claims.
Partners with production, purchasing, department leaders, and other relevant parties to rectify damages, imperfections, claims, and other discrepancies in the shipping and receiving materials and supplies promptly and efficiently.
Will be assigned additional duties as necessary to support the department.

Your Physical Work Environment Will Require…

Office and Manufacturing Plant Environment
Warehouse driving such as forklift, lift trucks, etc
Shipment transport, driving box truck, etc
Lift up to 50 lbs.
Sitting, standing, stooping, bending, other movement as necessary
Manufacturing Plant – required PPE when necessary

Your Experience Should Be...

High School diploma or GED required.
Industry knowledge preferred
Ability to provide consistent team leadership daily.
Freight handling equipment such as pallet jacks, forklifts, etc.
Loading, unloading, handling freight and materials.
Managing inventory, tracking and accounting for inventory transactions and variances.
Knowledge of handling, tracking and filing shipping and billing paperwork.
Strong, professional verbal and written communication skills.
Strong sense of time management, scheduling and prioritizing.
Teamwork and team building skills.

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Maintenance Mechanic (Theodore, AL, United States, 36582)

Ensuring Chart’s Success…

What Will You Do?

Under general direction, repair and maintenance of production related equipment within the manufacturing facility.

· Troubleshoots and repairs equipment including electrical, hydraulic and mechanical, plumbing, engines, motors, cranes and other production related equipment

· Documents and completes records of repair, work orders, etc. in an accurate and timely manner

· Uses hand and power tools and precision measuring and testing instruments to repair and maintain

· Maintains a clean work area and maintains general housekeeping standards, such as proper care for assigned tools

· Understands and practices established safety and quality standard procedures

· Performs all tasks to ISO standards and requirements

· Assists with cross training peers

· Other duties and responsibilities as assigned by management

Your Physical Work Environment Will Require…

PHYSICAL DEMANDS:

While performing the duties of this job, the employee is regularly required to stand, walk, sit, bend, stoop, twist and even crawl. The employee regularly lifts and carries 50 pounds and will frequently push, pull and handle materials.

WORK ENVIRONMENT:

While performing the duties of this job, the employee regularly works near moving mechanical parts and may be exposed to any of the following: metal cuttings, welding odors, extreme temperatures, flying debris, exposure to chemical cleaning solutions and odors, wet and dirty cleanups as well as drainage issues.

Moderate noise in the work environment

Your Experience Should Be...

Required

· 3+ years related experience, preferably in a manufacturing or industrial environment

· Proven working knowledge of industrial powered equipment including forklifts, aerial lifts, cranes and hoists

· Intermediate electric, pneumatic, hydraulic and PLC troubleshooting skills

· Advanced troubleshooting and repair skills

· Experience interpreting blueprints, sketches

· Basic math

· Self - starter capable of effectively managing multiple concurrent projects

· Overtime, weekend hours and split shifts, as needed

Preferred

· High school diploma or GED

· Certification from trade school or technical program

· Basic wiring skills a plus

· Electrical motor control experience, desired

· Effective communication skills

· Familiarity with Microsoft Office a plus

Our Benefits Package...

Materials Handler (Franklin, IN, United States, 46131)

Ensuring Chart’s Success…

Chart's Material Handler position plays a key role in the business. Chart's Franklin, IN location is currently seeking candidates interested in a Material Handler position within the Parts, Repairs & Service (PRS) division.

What Your Day-to-Day Activities Will Be…

Performing general clerical functions
Processing orders for customers.
Pulling orders from warehouse area
Performs cycle counting and reconciliation on a daily basis
Performs general shop maintenance and clean up.
Performs all tasks to ISO 9001 standards.
Performs other duties as assigned.

Your Education Should Be…

High School diploma or GED

Your Physical Work Environment Will Require…

Lifting up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling
Frequent operation of forklift and scissor lift
Frequent pushing, pulling and handling of material
Occasional climbing and working at elevated positions

Your Professional Experience Should Be…

Customer service skills
Excellent work and attendance records

Additional Desirable Qualifications…

Readily acts on challenges and with a “can do” attitude
Encourages the open expression of diverse ideas and opinions
Attentively listens to others
Knows strengths, weaknesses, opportunities, and limits
Admits mistakes and gains insights from experiences
Willingness to ask questions to gain a better understanding

Chart is an equal opportunity employer...

Need an Accommodation...

Welder (McCarran, NV, United States, 89434)

Ensuring Chart’s Success…

Chart’s Welder 6 position plays a key role in the manufacturing process of Chart’s products. Chart produces high quality manufactured products using radiography, vacuum mass spectrometry, and phased array ultrasonic testing. Chart complies with ASME, DOT, AAR, and EN pressure vessel codes.

We are seeking a skilled and detail-oriented TIG Welder to join our team, specializing in welding for complex cryogenic systems. The ideal candidate will have extensive experience in pipe welding with stainless steel, adhering to the highest industry standards for precision and quality.

What Will You Do?

• Perform TIG welding on stainless steel pipes used in cryogenic systems.
    •    Read and interpret blueprints, schematics, and technical drawings to determine welding specifications.
    •    Ensure welds meet strict quality control and safety standards, particularly for cryogenic applications.
    •    Operate and maintain welding equipment, including torches, gas systems, and other related tools.
    •    Conduct pre-weld and post-weld inspections to ensure structural integrity and compliance with project requirements.
    •    Work collaboratively with team members to troubleshoot and resolve technical challenges during fabrication.
    •    Adhere to all company safety policies and procedures to maintain a safe working environment.

Your Physical Work Environment Will Require…

Fast-paced fabrication shop and on-site project settings.
Exposure to varying temperatures, including cold environments associated with cryogenic systems.
Strict adherence to safety protocols and use of personal protective equipment (PPE).
Physical ability to lift up to 50 lbs and perform tasks requiring standing, bending, and working in confined spaces for extended periods.

Your Experience Should Be...

•    Minimum of 2 years of TIG welding experience, preferably in pipe welding with stainless steel.
    •    Ability to obtain and maintain TIG welding certifications (certifications encouraged).
    •    Strong understanding of welding processes, metallurgy, and the behavior of stainless steel in demanding applications.
    •    Proficiency with measuring instruments, such as calipers and micrometers, to verify dimensions and tolerances.
    •    Excellent attention to detail and manual dexterity.

Preferred Qualifications:
    •    Experience working with cryogenic systems or high-precision piping assemblies.
    •    Familiarity with orbital welding equipment and techniques.
    •    Knowledge of industry codes and standards, such as ASME and AWS.

Our Benefits Package...

- Competitive salary and benefits package

- Health, dental, and vision insurance

- Retirement plan

- Paid time off and holidays

- Opportunities for professional development and advancement

Structural Welder (New Iberia, LA, United States, 70560)

Ensuring Chart’s Success…

What Will You Do?

Weld by arc method using gas shielded flux-cored wire, semi-automatic

Weld on carbon, alloy or stainless steel plate, sheet, shapes, castings or other parts included in fabricated steel work

Interpret drawings and welding symbols

Select the correct welding wire and adjust welding machine to make the welds specified

Operate arc gouging equipment

Produce welds which are acceptable in strength and appearance in flat, horizontal and vertical positions using gas-shielded flux core wire welding procedures

Clean welds by grinding or brushing where required

Judge proper setup for welding

Apply welding sequences which will prevent excessive shrinkage or distortion

Learn the Weld Map and Welding Procedure Specification requirements

Demonstrate an understanding of the proper use of hand tools, grinders and welding equipment

Assist Welders and Fitters in cleaning, moving, holding, clamping and preparing work pieces

Required to work at elevated heights up to 75ft

Add’l duties and responsibilities may be assigned

Your Physical Work Environment Will Require…

Your Experience Should Be...

High school diploma or equivalent

Able to pass 2G, 3G and 4G skill tests

Two years’ experience as a welder or technical welding program

Knowledge of shop math preferred

Requirements may be obtained through on-the-job training

Our Benefits Package...

Sr Revenue Manager (Stafford, TX, United States, 77477)

Ensuring Chart’s Success…

The Senior Project Accountant is responsible for providing all accounting support throughout the project lifecycle and will work very closely with Project Managers, Project Controls, and the Contract Billing Group as well as coordinating with other Finance/Accounting teams (General Ledger, FP&A, etc.) on project forecasting, reconciliations, reporting, and analysis.

Role: Hybrid or Remote (preferred candidates located within Central and Eastern Time Zones)

What Will You Do?

Review project contract documents for Revenue Recognition treatment
Setup and maintenance of Projects in JDE E1 to include master data, budgets, and projections
Process Change Orders and Forecast Adjustments
Monitor and track project costs against budget/forecast and analyze labor/time and review major equipment/materials and vendor costs
Work with Project Management/Controls to evaluate project progress and prepare monthly cost accruals based on earned values/rules of credit
Conduct Monthly Project Status/Financial Review Meetings Run/analyze revenue recognition in accordance with accounting standards and company policy Perform monthly P&L and Balance sheet reconciliations related to projects
Develop monthly/quarterly analyses and comparative financial reporting for project data
Maintain documentation and provide quarter-end/year-end support for project-related internal/external audit requirements
Perform other duties as required to mee
Supervising and managing a team of project accountants; providing guidance, training, and support to ensure the team meets its objectives.

Your Experience Should Be...

Minimum 3 years of experience in Project Accounting
3 years supervisor experience .
Knowledge of finance, accounting, budgeting, and cost control principles including
Generally Accepted Accounting Principles and percentage of completion accounting Industry experience in Manufacturing and Engineering
Major ERP system experience:
- BAAN, EpiCor, AX, SAGE, or JDE E1 experience a plus
Advanced proficiency with MS products, specifically
Excel Exceptional written and verbal communication skills
Attention to detail and capability to analyze financial data and prepare ad hoc reports and analyses
Ability to work independently, take initiative, and employ critical thinking skills
Capacity to produce quality deliverables within tight timeframes, simultaneously manage various projects and tasks, and respond to changing priorities.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Machine Operator (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

Grow a Cooler career with Chart Industries by supporting Shop Operations as a Machine Operator! Chart’s Machine Operator position plays a key role in the manufacturing process of Chart’s products. This position will be responsible for helping to produce high quality manufactured products used all over the world. This position is Friday through Sunday, with ability to pick up other shifts during the week, if desired. Day shift and Night shift availability.

What Your Day-to-Day Activities Will Be…

ESSENTIAL FUNCTIONS & RESPONSIBILITIES:

Follows instructions on how to set up machines at beginning of shift to ensure proper operations
Learns testing procedures to ensure optimum operations during production procedure
Maintains and cleans machines before and after shifts
Monitors machines during each procedure to ensure optimum operation
Performs random tests to ensure accuracy
Performs periodic checks to ensure quality production

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Ability to read a tape measure
Ability to read and comprehend shop drawings
In depth knowledge of safety practices and hazards related to machine operations
Ability to lift 70 lbs
Ability to operate manual lathes
Ability to operate manual mills
Ability to operate head cranes
Ability to operate a variety of hand tools
Ability to adjust vision focus
Ability to work shift work
Ability to meet production goals
Ability to complete tasks
Knowledge of basic mathematical principles
Knowledge of mechanical tools
Ability to work overtime when required

Your Education Should Be…

High School Diploma or Equivalent

Your Physical Work Environment Will Require…

INTERACTION:

Works with supervisor

WORKING CONDITIONS:

Must be able to work inside & outside

REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) WHILE IN THE SHOPS:

Safety Glasses
Steel Toe Boots
Ear Plugs
Gloves
Hard Hat (when needed)

PHYSICAL REQUIREMENTS:

Using hands, fingers to handle or feel
Walking
Sitting
Standing
Stooping
Kneeling
Crouching
Crawling
Talking
Hearing
Lifting from 10 lbs to 25 lbs on a frequent basis
Lifting of 75 lbs on occasional basis

Your Professional Experience Should Be…

6 months Manufacturing/Industrial experience

Chart is an equal opportunity employer...

Need an Accommodation...

Field Service Tech (Valencia, CA, United States, 91355)

Ensuring Chart’s Success…

What Your Day-to-Day Activities Will Be…

• Ensure timely and continuous quality service to the customer, by phone or site visits when necessary.

• Work with manager on customer communication.

• Prepare detailed service reports.

• Maintain tools and test equipment used for commissioning/service.

• Coordinate contact with all levels of supervision.

• Troubleshoot control systems.

• Read and understand electrical schematics and use of troubleshooting tools and meters.

• Read and understand plumbing schematics. (training provided)

• Coordinate, perform and report results from testing. This includes logging results as required by written or verbal instructions.

• Adhere to contractual service agreements per sales and customer service directives.

• Perform quality tests as instructed by work instructions, engineering, or supervisor to ensure product quality.

• CNG/LNG repair and maintenance. (training provided)

• Install equipment including bulk tanks, pipe, vaporizers, skids, pumps, dispensers, etc. (training provided)

• Observe and practice safety procedures and policies.

Your Education Should Be…

· Technical diploma/Certification preferred, preferably mechanical, or electronics/instrumentation related.

Your Physical Work Environment Will Require…

• Extensive travel to customer sites.

• Both outdoor and indoor work.

• Office and plant work.

• Exposure to metal cuttings and welding odors.

• May involve exposure to temperature extremes

• Occasional weekend and holiday work

• Required use of personal protective equipment.

• Frequent standing, sitting, bending, stooping, twisting, and walking,

• Frequent lifting up to 75 lbs., occasional heavier lifting.

• Occasional pushing, pulling of materials up to 40 lbs.

Your Professional Experience Should Be…

• Excellent communication skills

• Work well in teams and independently.

• Read and understand detailed blueprints or drawings.

• Must possess a working knowledge of personal computers including MS Office, JD Edwards.

• Basic mechanical abilities.

Chart is an equal opportunity employer...

Need an Accommodation...

Field Service Tech III (Duluth, GA, United States, 30096)

Ensuring Chart’s Success…

ChartWater™ is a global manufacturer and service provider of engineered solutions f or municipal water treatment and industrial process applications. Our portfolio of proven products, processes, and engineering expertise provides customers with single-point responsibility f or complete solutions that enable water professional to achieve their objectives with the lowest combination of risk and costs while driving enhanced outcomes f or people, communities, and the planet.

What Will You Do?

Travel to customer sites for system startups, media replacement, and system issues that can't be resolved remotely.

Train customers on how to operate equipment, which includes review of O&M manual.

Provide onsite technical support for the purpose of troubleshooting and resolving system issues of a mechanical, electrical or process nature.

Work closely with engineering and project management team members, when appropriate to ensure a successful system start up and/or resolve customer technical issue.

Estimated 75% travel required.

Your Physical Work Environment Will Require…

This position primarily works outdoors, in all types of weather, and in potentially hazardous environments, which may involve exposure to dangerous chemicals. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and ladder climbing all day. The employee must frequently li t and/or move items over 60 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Your Experience Should Be...

High School Diploma or GED equivalent required

A Trade school certification is strongly preferred.

A minimum of 3 years field service-related work experience, preferably in a water treatment environment.

Candidates with water treatment, experience should have a working knowledge of drinking and process water treatment systems, membrane systems, filter systems, components, and ancillary equipment.

Successful candidates will need to have a strong mechanical aptitude to identify and resolve system issues

Proven ability to address difficult customer interactions in a positive and productive manner; • Electrical controls and instrumentation competency preferred, PLC knowledge a plus; • Proficiency with Microsoft Excel and Word; • Experience commissioning of equipment is preferred.

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Senior Financial Accountant (Budapest, Budapest, Hungary, 1083)

Ensuring Chart’s Success…

We are looking for you to join Howden and be a trusted and valued member of our Financial Accounting team based in the Budapest Shared Service Centre. Working as part of a vital team, you will have the opportunity to support a number of exciting projects in addition to your day-to-day tasks. You will be responsible for managing the end-to-end financial accounting process across the global scope and ensure the application of US GAAP and the local statutory requirements.

What Will You Do?

• Performing daily/weekly/monthly reconciliation tasks and investigating/correcting discrepancies
• Completing manual booking and approve journal bookings and balance sheet reconciliations
• Preparing VAT returns/Intrastat/EC sales and purchase reporting
• Processing and allocating payments
• Preparing cash flow reports on a weekly basis
• Managing intercompany netting and process settlement booking
• Tracking and reporting of metrics on the overall financial accounting process
• Participating in process improvement and standardization projects

This is a permanent position working Monday to Friday. We offer hybrid working for this role which will allow you to enjoy the balance of home working and collaboration time with the team in our modern, friendly offices.

Your Experience Should Be...

BA in the field of economics and/or accounting
3-5 years of experience with General Ledger accounting
At least 2 years of experience within an SSC envrionment in a finance role
Strong understanding of the accounting principles
Fluency in English is a must, but any European language knowledge is an advantage
Strong MS Office knowledge, especially in Excel
Good understanding of major ERP systems
Strong analytical skills and ability to understand business needs and influence business impact
Attention to details and accurate data management

Our Benefits Package...

Health and Quality of Life benefits:

Competitive salary and a generous cafeteria bonus
Private Medical Insurance package with Medicover.
Life Assurance package with NN Group Life
Home office allowance, extra holidays, employee recognition initiatives, well-being initiatives and team buildings

Development Opportunities:

Constant learning opportunities and challenges that help our employees grow
Vertical and horizontal organizational movement
Semester-based language course.
Professional practice and free e-learning opportunities

Flexible and supportive working environment:

Our new and modern office is in the heart of Budapest at the corporate centre in Corvin Negyed behind the Corvin plaza: Budapest, Bókay János u. 44, 1083

Hybrid schedule (3-4 days at home, 1-2 days at the office)
Non-binding working hours
Commuting allowance for those residing outside of Budapest
Showering facilities for cyclists and sportspeople
Workplace extras to facilitate working at the office: free coffee and different beverages, fruit day, a social corner
State-of-the-art technology and IT equipment: laptop, headset, workstation, 2 monitors per employee, Windows and O365 software
Accommodation for special needs and those with a physical disability
Global diverse community where people can support and learn from each other, celebrate successes and have fun in team buildings and programs.
Opportunity to be involved in our ESG “Bright Future” initiatives

CNC Machinist - 3rd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives

*Please note, this is for 3rd shift. Sunday - Thursday, 10pm to 6:30am

What Will You Do?

Sets up and operates all machining and related equipment in the machine shop area.

Sets up and operates all horizontal and vertical mills in the machine shop area.

Faces, turns, mills, chamfers, drills, threads, slots and bores aluminum, steel products and assemblies using the above machines.

Change milling tools and other tools as required.

Sets up and operates engine lathe.

Sets up and operates a radial drill press.

Performs drilling, tapping, reaming, boring, counterboring, chamfering and hole sawing using the above machines.

Sets up and operates all single spindle drill presses.

Drills, reams, counterbores, chamfers, and taps various parts using the above machines.

Sets up and operates a 5-ton hydraulic press to straighten and size parts.

Sets up and operates all saws. Operations included are saws pipe, angles, flat plate, miters and scarfs header bodies from aluminum or steel.

Sets up and operates power and hand rollers to form parts per print.

Sets up and operates nibbler using it to rough cut material and cut 1/4" parting sheets.

Sets up and operates pedestal grinder use in sharpening tools and bits.

Sets up and operates a band saw spot welder station to assemble saw blades.

Sets up and operates a plasma cutter to include the usage of a PLC.

Sets up and operates 500-ton brake press to form, straighten and size parts.

Cleans parts in cleaning

Surface grinding, form grinding and holding tight tolerances

Machines and Equipment

Band Saws
Horizontal & Vertical Mills
Radial Drill
Single Spindle Drill Presses
Lathe
Small Hand & Power Rollers
Hydraulic Press
500 Ton Brake Press
Nibbler
Saw Blade Welder
Pedestal Tool Grinder

Your Physical Work Environment Will Require…

Lifting or carrying up to 50 lbs.
Frequent sitting, standing, stooping, bending, twisting, walking and occasional crawling
Frequent pushing, pulling and handling of material
Occasional climbing and working at elevated positions
Repetitive hand movements during welding operations

Your Experience Should Be...

High School diploma or GED required
Industry knowledge preferred
3 - 5 years of experience required
The incumbent must have sufficient knowledge and ability to:
Read prints and interpret machining requirements.
Set up and operate machines and equipment listed above.
Modify and use tooling and fixturing.
Use all measuring devices associated with machining to close tolerances (.000 to .060).
Must use math using decimals and fractions.
Must understand good machining practices (feeds, speeds, cutters, and materials).
Good hand/eye coordination.
Ability and knowledge to check and verify that all parts meet requirements and specifications.

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Tool & Die Maker II - 3rd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives

*Please note, this is a 3rd shift position. Sunday - Thursday, 10pm to 6:30am

What Will You Do?

Maintain inventory of tools and materials for operation of Tool Room.
Inspection of tools, dies and fixtures that are made by outside vendors.
Keep records of all dies.
Make tool reports of finished tools.
Coordinate work between tool maker and die form grinders.
Work with Engineering to understand tooling concepts, requirements, layout, anticipated problems, and tool build load forecast.
Support Maintenance when needed.
Maintain and overhaul fin presses.
Build, sharpen and troubleshoot fin dies.
Assist Engineers in estimating time and materials of jobs.
Coordinate heat treat process.
Develop and troubleshoot new tooling and make revisions if needed.
If required, prepare tool sketches.
Set up and operate precision tools.

Your Physical Work Environment Will Require…

Working conditions may vary from a temperature controlled, isolated environment to areas which are cramped, greasy and poorly lit. Exposed to sharp edges, high speed cutting tools and oil. Standing, reaching, bending and lifting 0 to 50 lbs. When lifting over 50 lbs., two people are required.
The employee who performs this job has responsibility to maintain proper housekeeping in the work area and keep machines in good operating condition. Is also responsible for safety and quality workmanship and procedures.
The above statements are intended to describe the general nature and level of work performed by individuals assigned to this classification. It is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so assigned.

Your Experience Should Be...

Person should have or should qualify for a five-year state indentured apprenticeship or equivalent.
Person should have background in mathematics, mechanical drawing, metallurgy and machine shop practices.
- Ability to program CNC equipment using ‘G’ and ‘M’ code format
- Ability to read prints and interpret machining requirements.
- Ability to maintain machining tolerances of ±.0002.
- Ability to square up fixturing on table to .0000 over a length of 36".
- Ability to identify different shapes of truing diamonds and the working condition of the diamond.
- Must be able to adjust tooling and equipment to tolerance of .000 to .0000.
- Ability to identify, monitor and compensate for machine expansion changes.
- Ability to stone and hone a sharp radius on tool steel.
- Must be able to communicate at all levels from shop floor operator to engineer.
Machines and Equipment

* Fin Forming Presses

* Automatic Surface Grinder

* CNC Form Grinder

* Manual Lathe

* Manual Knee Mill

* Vertical Machining Center

* Vertical and Horizontal Band Saws

* Wire EDM

* Drill Presses

* Precision Measuring Tools

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Warehouseman (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more?

What Will You Do?

Prepare and complete orders for delivery or pickup according to schedule (load, pack, wrap, label, ship)
Receive and process warehouse stock products (pick, unload, label, store)
Perform inventory controls and keep quality standards high for audits
Keep a clean and safe working environment and optimize space utilization
Report any discrepancies
Communicate and cooperate with supervisors and coworkers
Safely operate warehouse vehicles and equipment
Follow quality service standards and comply with procedures, rules and regulations
Execute special projects as required

Your Physical Work Environment Will Require…

REQUIREMENTS - MUST BE ABLE TO DO THE FOLLOWING:

Follow all safety procedures
Have/be able to obtain forklift license
Ability to report to manager
Information Analysis
Ability to deal with complexity
Ability to meet deadlines
Time Management
Organizational skills
Dependability

WORKING CONDITIONS:

Must be able to work inside and outside
Hot in the summer, cold in the winter

PHYSICAL REQUIREMENTS:

Lifting
Bending
Standing for long periods of time
Hearing
Talking
Driving
Sitting
Walking
Climbing

Your Experience Should Be...

QUALIFICATIONS

Minimum Education:

High School Diploma or Equivalent

Minimum Experience:

0-3 years warehouse experience

Skills Required :

Forklift (fuel and electric), stock picker, ERP experience, COmputer (intermediate level), Cycle counting

Our Benefits Package...

Electrical Maintenance Technician (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

What Your Day-to-Day Activities Will Be…

Inspect and diagnose electrical problems in various systems and equipment.
Install, maintain, and repair electrical systems, including Motors, switchboards, controllers, and transformers
Perform preventative maintenance on electrical systems and equipment, including cleaning and replacing parts
Test electrical systems and equipment to ensure proper functioning.
Ensure compliance with local, state, and federal regulations, including OSHA and NEC codes.
Provide guidance and training to other maintenance staff on electrical systems and equipment.
Diagnosis and program PLC and Drives.
Wire in machinery up to 3 phase 480V.
Install conduit and run wire to circuits and equipment.
Enter workorders in CMMS program.
Follow company PPE requirements and safety policies.

Your Education Should Be…

High school diploma or equivalent: technical degree or certification in electrical maintenance.
3+ years of experience in electrical maintenance or related field.
Electrical license preferred.

Your Physical Work Environment Will Require…

INTERACTION:

Works with Lead/Supervisor

WORKING CONDITIONS:

Mostly Outdoor/Shop Environment
Must be able to work outdoor and indoor

PHYSICAL REQUIREMENTS:

- Walking
- Standing
- Using hands
- Bending
- Lifting
- Sitting
- Climbing

Your Professional Experience Should Be…

Ability to lay out electrical jobs and create a parts list
Strong knowledge of electrical systems, Including PLC’s, and Drives.
Proficiency with electrical testing equipment, such as multimeters, thermal imaging gun.
Excellent trouble shooting and problem-solving skills.
Ability to work independently, with minimal supervision, as well as part of a team
Good communication skills
Willingness to work flexible hours including weekends.
OSHA 30
Arc Flash training.

Chart is an equal opportunity employer...

Industrial Supervisor (Theodore, AL, United States, 36582)

Ensuring Chart’s Success…

What Will You Do?

Utilize employee resources and equipment to achieve production plans and schedules within a specified timeframe
Train, inform, and onboard employees to specific procedures, processes and objective of department stressing and promoting quality and safety standards
Complete 45-day, 90-day, and annual employee reviews accurately according to the performance criteria and in a timely manner; ensure employee signs off on reviews within a timely manner
Maintain production, required personnel attendance, right-to-know and training records and other records pertaining to the department
Partner with other departments in coordinating raw materials, parts, assemblies, completed units and staffing
Direct employee problems to the appropriate authorities for assistance, resolution and response.
Continually evaluate workflow and processes, and further recommend more efficient and effective procedures to minimize costs.
Manage employee performance and attendance providing real time, honest feedback
Participate in weekly supervisory meetings to increase and maintain up-to-date communications and relay pertinent information to departmental employees
Update manufacturing manager on progress of production plans and schedules
Administer work rules, regulations and disciplinary action when necessary, observing and practicing safety procedures and policies
Insure TDD, drawing and specification information is current to all production W/O’s.
Documents all drawing and BOM discrepancies. Submits drawing redlines and BOM issues to the engineering group.
Utilizes problem solving techniques and QA resources when product defects are recognized
Ensure all company policies, procedures, and safety objectives are followed. Report all findings.
Identify shortages and communicate in writing weekly shortfalls to purchasing.
Communicate production pending information with the Master Scheduler and production team.
Continually seek improvements for all 5S and lean manufacturing objectives.
Continual input for improvement of production processes effecting product flow and throughput.
Other duties and responsibilities as assigned

Your Physical Work Environment Will Require…

PHYSICAL DEMANDS:

While performing the duties of this job, the employee is regularly required to stand; walk and sit. The employee frequently is required to use hands to finger; handle or feel objects; tools or controls and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. Must be able to occasionally lift and/or move up to 50 pounds.

WORK ENVIRONMENT:

Your Experience Should Be...

Required

Minimum 5 years of manufacturing experience in related area
Proven experience problem solving and navigating through ambiguity
Team player mentality
Understand and use basic blueprints
Understand and use basic math

Preferred

High school diploma or GED
Previous experience as a supervisor or as a lead
JD Edwards and Excel
Tig and Mig welding experience

Our Benefits Package...

Applications Engineer (Beasley, TX, United States, 77417)

Ensuring Chart’s Success…

What Will You Do?

Your Experience Should Be...

Bachelor’s in Mechanical or Chemical Engineering or related field preferred
Ability to lead and influence a cross-functional team.
• Read, analyze, and interpret technical data into everyday language.
• Write in a clear and concise manner.
• Effectively present information to customers, departments and respond to questions in a high-speed environment.
• Effectively facilitate meetings and execute plans.
• Proficient in using Excel, PowerPoint, Adobe, Word, and MS Project.
• Proven depth of knowledge operating in an ERP-based manufacturing environment.
• Superior analytical skills.
• Ability to read, analyze and interpret customer and industry technical specifications, engineering drawings, BOMs, financial reports and legal documents.
• Ability to effectively present information to top management, customers, and cross-functional leadership.
2 years of industry experience as a Sales or Applications Engineer
1 years of experience with thermal design, rating, and performance analysis
1 years’ experience in Oil and Natural Gas Industry
Knowledge of ASME Section VIII, Division 1 and API 661 Standards Exceptional and seasoned customer service experience

Our Benefits Package...

Chart provides a comprehensive offering of benefits to full-time employees including medical, dental, and vision benefits, 401k with an employer match, disability and life insurance benefits.

Operations Lead (Orem, UT, United States, 84057)

Ensuring Chart’s Success…

We are seeking a dynamic and experienced Operations Lead to join our team at our Orem, UT location, developing the Cryogenic Carbon Capture process. This role will be pivotal in ensuring the successful on-site operation of our innovative technologies and leading operational teams to achieve optimal performance. The ideal candidate will be a proactive problem-solver, comfortable taking ownership of operational challenges and will drive efficient solutions in a fast-paced environment. This is an exciting opportunity to be at the forefront of cutting-edge technology deployment and will contribute directly to our success.

What Will You Do?

Provide on-site leadership and technical guidance for the commissioning, start-up, and ongoing operation of Chart's process technologies at customer locations.
Lead and mentor on-site operations teams, ensuring adherence to safety protocols, operational procedures, and performance targets.
Serve as the primary point of contact for operational matters at project sites, fostering strong communication and collaboration with customers and internal teams.
Troubleshoot operational issues, identify root causes, and implement effective corrective and preventative actions.
Implement and help develop best practices for on-site operations, including standard operating procedures (SOPs), maintenance schedules, and performance monitoring systems.
Conduct performance analysis of operations operating systems, identify areas for improvement, and drive initiatives to enhance efficiency and reliability.
Collaborate with engineering and project management teams to ensure smooth project execution and successful handover to operations.
Participate in the development and review of operational documentation, including start-up manuals and operating procedures.
Ensure compliance with all relevant safety and environmental regulations at project sites.
Extensive Travel: Willingness and ability to travel approximately 50% of the time to various customer sites for on-site operational support and leadership.

Your Physical Work Environment Will Require…

The employee frequently is required to sit for extended periods of time, stand, walk, use hands and fingers, handle or feel, and reach with hands and arms. The employee is occasionally required to sit, climb, balance, kneel, crouch, or crawl. Lifting 50 pounds may be required. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Duties include lengthy visual requirements on computer monitors. Frequent travel will involve time spent in transit and at customer sites, which may have varying environmental conditions.

Your Experience Should Be...

A technical or engineering degree or equivalent practical experience in a relevant field (e.g., operations management, industrial technology, applied science).
Proven experience in leading and managing operational teams in industrial or technical environments.
Strong understanding of process operations, preferably within the energy, industrial gas, or related sectors.
Demonstrated ability to troubleshoot complex operational issues and implement effective solutions.
Excellent problem-solving and analytical skills.
Strong communication, interpersonal, and leadership skills, with the ability to effectively interact with diverse teams and customers.
Sound organizational skills for managing multiple priorities and meeting deadlines.
Experience with the development and implementation of standard operating procedures and best practices.
Experience with cryogenic process technologies, natural gas processing, or similar complex industrial systems, preferred.
Familiarity with process control systems and instrumentation is a plus.
Experience in commissioning and start-up of industrial facilities.
Knowledge of safety regulations and best practices in industrial environments.

Our Benefits Package...

Medical, dental and vision insurance
Employer contributions to an HSA account
Health Care and Dependent Care Flexible Spending Accounts (FSA)
Company-paid short-term and long-term disability coverage
Basic life insurance with the option to purchase supplemental individual, spouse and dependent child coverage
Up to two weeks of paid family leave
401k retirement savings plan including a company match
Employee stock purchase program

Quality Manager (Theodore, AL, United States, 36582)

Ensuring Chart’s Success…

The Quality Assurance Manager plans, coordinates, and directs the quality program designed to ensure conformance to requirements, customer satisfaction, and continual improvement for products manufactured at a Chart facility. This position will oversee the regulation process for products requiring approval including filing necessary applications and handling all outside agency interactions. This individual will be responsible for coordinating regulatory and customer inspections of the organization and facilities, including developing the procedures and systems to ensure regulatory compliance sustainability.

What Will You Do?

Maintain the Quality Management System.
Plan, promote, coordinate and oversees compliance to the ISO standards for the facility.
Conduct and coordinate internal audits and training to ensure the plant maintains its compliance to ISO standards.
Plan, promote, and organize training activities related to product quality, Code compliance, and reliability.
Train appropriate employees on Code compliance fundamentals for the various Codes (DOT, ASME, etc.)
Oversee code compliance for all product designs.
Manage quality team members and ensure oversight of materials, facilities, processes, and products.
Promote the effectiveness and timeliness of the corrective action system and lead efforts in problem solving activities
Formulate and maintain quality assurance objectives for site and coordinate objectives and initiatives with production to avoid production delays

Your Physical Work Environment Will Require…

Frequent sitting, standing and walking.
Occasional stooping, bending and twisting.
Office work is performed in an industrial manufacturing environment with possible exposure to temperature extremes, overhead cranes, material with rough edges and odors associated with cutting and welding.

Your Experience Should Be...

Bachelor's degree; industry recognized accreditation through ASQ or other industry organizations
Knowledge of ASME Section VIII, Div. 1 and Section IX, DOT, and PED/TPED, a plus.
Working knowledge and experience with ISO 9001, 14001, and 45001 system practices.
Pressure vessel code experience (DOT, ASME, etc.), preferred
Outstanding communication skills at all levels (written and verbal)
Proven ability to work effectively with cross-functional teams, including in a project management environment.
Strong analytical skills including exposure to systems and familiarity with SPC.
Demonstrated ability to both plan and manage multiple tasks and projects.
Proven ability to provide high level of customer service.

Our Benefits Package...

Skilled Operator (Renfrew, Scotland, United Kingdom, PA4 8XJ)

Ensuring Chart’s Success…

The main purpose is to Operate CNC machine tools in the manufacturing department, specifically in Screw Compressor Rotor manufacturing. This includes milling, turning, grinding and balancing. Howden have WFL Millturns, Holroyd Grinding/Milling machines, Danobat cylindrical grinders, Schenk balancing machines and manual lathes. All CNC machines have Siemens controlsOperate CNC machine tools in the manufacturing department, specifically in Screw Compressor Rotor manufacturing. This includes milling, turning, grinding and balancing. Howden have WFL Millturns, Holroyd Grinding/Milling machines, Danobat cylindrical grinders, Schenk balancing machines and manual lathes. All CNC machines have Siemens controls.

What Your Day-to-Day Activities Will Be…

Manufacture compressor components to Engineering drawings and specifications to ensure successful first time build and test of finished compressors.
Adhere to all relevant instructions contained within Work Standard Instructions (WSI’s) in the manufacture of Compressor components.
Conform to all aspects of HCO’s Quality Management System including the fulfilment of all relevant procedures etc. including all Standard Practice Instructions (SPI’s)
Deliver quality components in a timely manner whilst contributing to efficient and effective manufacturing principles.
Contribute and comply with accurate collation of Shop Floor Documentation information including data contained within HCO’s Shop Floor Data Collection system (SFDC).
Provide training support for Apprentices and work colleagues to help improve skills levels
Interact and respond to all aspects of HBE supporting cost reduction, efficiency, delivery and Quality improvements.
Ensure adherence to health and safety standards in compliance with company policy to ensure safe working environment.

What do you bring ...

Recognised Engineering apprenticeship and relevant qualifications.
Engineering Drawing interpretation ability
Experienced in multi-disciplined CNC machining – Turning, Milling and Grinding. Profile Grinding
Previous experience with precision manufacturing
Good communication skills
Experience/Understanding in working with Siemens controls
Ability in the use of measuring equipment – micrometres – Ball Mics Thread gauges – Callipers

Our benefits ...

This is a permanent position working 37 hours per week with a starting salary of £37,500, rising to £39,000 upon completion of training. You will also have the opportunity to earn shift allowance with the tam currently operating a three-shift rotating structure with a rate of x1.33, consisting of early shift (6am-2pm), back shift (2pm-10pm) and night shift (10pm-6am), Sunday Night - Friday Early. Additional overtime available out with the standard shift pattern (All overtime at 1.5).

Additional benefits include;

Generous holiday entitlement package totalling 33 days annual leave
Howden Pension Plan with a maximum employer contribution of 7%
Enhanced Maternity, Paternity, shared parental and adoption leave pay
Free onsite parking
Healthcare cash plan
Group Life Assurance plan at 3x salary
Group Income Protection plan
Access to My Howden Benefits & Wellbeing Portal – Cycle2Work programme, range of discounts across various retailers, wealth of information to support health & wellbeing
Dedicated Help@Hand Service – free counselling, physiotherapy, financial support, medical second opinion, remote GP, personal training, nutrition consultations etc
Opportunity to be involved in our ESG ‘Bright Future’ initiatives – STEM ambassador & volunteering

Chart is an equal opportunity employer...

Service-Techniker CPI (Olpe, Nordrhein-Westfalen, Germany, 57462)

Ensuring Chart’s Success

Ihre Aufgaben

Durchführen der notwendigen Vorbereitungen unter Berücksichtigung des Arbeitsumfangs sowie Bereitsstellen der erforderlichen Materialien und Werkzeuge, gemäß Anweisung des (leitenden) Technikers, um Verzögerungen zu vermeiden.
Durchführung aller Tätigkeiten bzgl. Wartung und Reparatur oder Instandhaltung von Produkten, die zur Wartung und Reparatur übernommen werden, unter Aufsicht des (leitenden) Technikers
Kontrolle und ggf. Korrektur der ausgeführten Arbeiten
Weiterentwicklung der technischen Kenntnisse bzgl. der CPI-Produkte in Eigeninitiative
Erstellen von einfachen Wochen- und Zeitlisten
Einhalten und Sicherstellen der festgelegten Qualitäts und Sicherheitsanforderungen. Melden von unsicheren Situationen sowie Verbesserung der eigenen Sicherheit.

Ihr Profil

Abgeschlossene Berufsausbildung als Elektriker oder Mechatroniker oder entsprechende Berufserfahrung
Gute Deutsch- und Englischkenntnisse in Wort und Schrift
100% Reisebereitschaft - auch international
Kostenbewusstes Denken und Handeln
Zuverlässigkeit, Einsatzbereitschaft, Mobilität, Flexibilität, hohe Belastbarkeit bei außergewöhnlichen Einsätzen
Sie treten sicher auf und sind wortgewandt mündlich und schriftlich
Grundkenntnisse in den gängigen MS-Office-Anwendungen setzen wir voraus
Führerschein Klasse B
Sie sind ein Teamplayer mit sehr gutem technischen Verständnis, sicherem Auftreten, Kontaktstärke und Durchsetzungsvermögen

Unsere Rahmenbedingungen & Benefits

Ein unbefristetes Beschäftigungsverhältnis
Eine abwechslungsreiche, eigenverantwortliche und herausfordernde Aufgabe im interkulturellen Umfeld
Eine umfassende Einarbeitung sowie kontinuierliche Weiterbildung
Ein sehr gutes Vergütungspaket
30 Urlaubstage im Kalenderjahr bei einer 38-Stunden-Woche
Betriebliche Altersvorsorge

Wir sehen Sie als Mitglied unseres aufstrebenden Teams

Chart Industries legt Wert auf Chancengleichheit. Wir freuen uns über Bewerbungen von Menschen mit Beeinträchtigung und unterstützen zudem die Bundesinitiative „Job – Jobs ohne Barrieren“.

Dieser Kontakt ist für Sie da

Fühlen Sie sich angesprochen? Dann bewerben Sie sich direkt über unser Bewerberportal Bewerberportal.

Dieser Kontakt ist für Sie da

Bei Fragen steht Ihnen Björn Kulisch unter recruitment-germany@chartindustries.com gern zur Verfügung.

Service-Techniker CPI (Olpe, Nordrhein-Westfalen, Deutschland, 57462)

Willkommen bei Chart/ FLOW/ VCT/ GOFA

Project Engineer (Zuidland, Zuid Holland, Netherlands, 3214 VP)

The Big Picture

As a Project Engineer you are responsible for technical and engineering aspects of the field service jobs in combination with the service center jobs. You plan, schedule, organize, outsource and discuss with the customer the repair solutions in terms of leadtime, quality and prices.

What Will You Do?

Supports the sales department in providing correct information for the customer's RFQ and thinks along on possible solutions to be delivered.
Participates in customer visits (alone or with sales engineer).
Supports operational departments by e.g. making technical scopes and advising on complicated problems.
Technical review of the reports made by our Service Technicians, Advises on repair solutions in order to achieve the best possible result.
Provide customers with solicited and unsolicited advice so that (expected) problems that arise are solved or prevented in the desired manner to achieve maximum value for the customer with a minimum waste.
Design products according to the set requirements (including dimensions, tolerances) of legal requirements and customer needs.
Documents solicited and unsolicited technical data, drawings and calculations.
Maintains a library of information and ensures that information is properly documented and easily retrievable.
Controls quality in terms of technical repairs and solutions, as well in our own Service Centre as at our subcontractors.
Contribute to the safety and safety awareness, identify and report unsafe situations

What Do You Need To Bring?

Bachelor degree in Mechanical Engineering
Experience with reciprocating compressors is a plus
Service and customer-oriented
Results-oriented
Analytical
Proactive
Creative/innovative
Team Player
Flexibility, ability to review and change priorities when needed
Strong English language skills

What will you get in return?

Interested or do you have any questions?

Are you interested? then you can easily apply with us in a few clicks. Do you have any questions? Then you can contact us with any questions on aico.peek@chartindustries.com.

Inside Sales Support (Rheden, Gelderland, Netherlands, 6991 GS)

Tbe Big Picture

Howden Thomassen Compressors (HTC) is a leading global engineering business who focuses on providing mission critical air and gas handling products to our clients, helping them to increase their environmental and operational efficiencies. We recognize the value of people and truly believe that by working together, aligned to a common purpose, we all have the opportunity to grow, learn and make a difference. Our expertise has made a valuable difference for our clients for the past 100+ years, and we are now looking for a Inside Sales Support, who will join our aftermarket team and will support in making a valuable difference in the century to come.

Our Aftermarket department ensures that compressors continue to operate for years to come through maintenance plans, supply of OEM parts, service calls and equipment modifications to today's technology or changed operating conditions and repairs. As Inside Sales Support, you will be responsible for the process of creating quotations up to order fulfillment. You will work together with our Sales team and our global business units. This is a unique opportunity to work for a company that has a leading role in the energy transition and will be working from our assembly plant in Rheden, NL.

What Will You Do?

Providing quotations and order confirmations including pricing, delivery times and technical descriptions in order to deliver the orders to the customer according to agreed specifications and delivery times, including coordinating the financial completion of the order;
Based on the pricing policy, determining the sales prices and delivery times, and taking into account price agreements, commissions, delivery terms, market trends, currency risks and past sales data/performance;
Reviewing Terms & Conditions and contracts of customers before forwarding them to the Legal Department;
Support the Howden regional offices in providing services to our customers;
Monitoring progress and coordinate with regard to procurement, operations and logistics;
Maintaining a good relationship with (internal and external) customers/relations.

What will you need to bring?

Relevant technical or commercial background (MBO level 4 or HBO level) by education or work experience in a similar industry;
Interest in the technical aspects in the role, commercial understanding and creativity to find the best technical-commercial solution (thinking out of the box);
Experience in evaluating Terms & Conditions and the financial and legal aspects;
A pro-active and continuous improvement mind-set: seek, propose, try, evaluate and implement improvements;
Excellent interpersonal skills including an open and engaging communication style;
Team player, responsible and a self-starter;
Quality focus;
Good in setting priorities setting and strong time management skills;
Fluent in English.

About Howden, a Chart Industries company

Warehouse Worker (Rheden, Gelderland, Netherlands, 6991 GS)

Het Grote Plaatje

Howden Thomassen Compressors (HTC) is een toonaangevend wereldwijd maakbedrijf dat zich richt op het leveren van bedrijfskritische lucht- en gasbehandelingsproducten aan onze klanten, waarmee ze hen helpen hun milieu- en operationele efficiëntie te verbeteren. Ze erkennen de waarde van mensen en geloven er heilig in dat we door samen te werken, gericht op een gemeenschappelijk doel, we allemaal de kans krijgen om te groeien, te leren en een verschil te maken. Onze expertise heeft de afgelopen meer dan 100 jaar een waardevol verschil gemaakt voor onze klanten. Daarom zijn we nu op zoek naar een Magazijn Medewerker die ons logistieke team komt versterken en ons zal ondersteunen bij het maken van een waardevol verschil in de komende eeuw.

In de functie van Magazijn Medewerker beheer jij de voorraad in het magazijn. Het gaat hierbij om groot en klein materiaal, bulk en maatwerk materialen, en onderdelen. Je werkt nauw samen met de afdeling Warehouse, Planning Operations, Supply Chain & Procurement. Dagelijks zorg jij ervoor dat het ontvangen, beoordelen, registreren en uitgeven van inkomende en/of uitgaande materialen en onderdelen op rolletjes loopt. Je speelt hierbij een belangrijke rol in het borgen van de voortgang. Schakelen tussen voorraad controle en het oplossen van voorraad problemen is een belangrijk onderdeel, hierin maak jij analyses om toekomstige problemen op voorhand te voorkomen.

Wat Ga Je Doen Bij Ons?

Ontvangst van goederen: Controleren en registreren van inkomende goederen.
Opslag: Plaatsen van goederen op de juiste locatie in het magazijn.
Orderpicking: Verzamelen van onderdelen volgens orderpicklijsten.
Distributie: Uitgeven van onderdelen naar de productie of de verpakkingsafdeling.
Voorraadbeheer: Bijhouden van de voorraad en melden van tekorten.
Onderhoud: Schoonhouden van het magazijn.
Documentatie: Bijhouden van administratieve taken zoals het invullen van formulieren en het bijwerken van systemen.

Wat Breng Je Mee?

Opleiding: Minimaal een middelbare schooldiploma.
Ervaring: Ervaring in een magazijnomgeving is een pluspunt.
Vaardigheden: Organisatorische vaardigheden en aandacht voor detail.
Technische kennis: Basiskennis van magazijnsoftware en scanners.
Teamspeler: Goede communicatieve vaardigheden en in staat om goed samen te werken.
Flexibiliteit: Bereidheid sporadisch een uurtje langer door te werken met collega’s, als het werk daarom vraagt.
Taalvaardigheid: Een goede beheersing van de Nederlandse en Engelse taal.

Wat Kan Je Van Ons Verwachten?

Wij bieden de juiste kandidaat een interessante en uitdagende functie met verantwoordelijkheid en impact binnen een professionele en internationale omgeving in een succesvol bedrijf. Je krijgt de kans om deel uit te maken van een team met toegewijde en enthousiaste collega's. Omdat wij talentmanagement als sleutel tot het succes van onze organisatie beschouwen, bieden wij mogelijkheden voor persoonlijke en professionele ontwikkeling. We bieden een salarispakket dat volledig aansluit bij het niveau van de functie, gecombineerd met een uitgebreid pakket secundaire arbeidsvoorwaarden.

Heb Je Interesse Of Heb Je Vragen?

Ben je geïnteresseerd? Dan kun je met een paar klikken eenvoudig bij ons solliciteren. Heb je vragen? Neem dan contact met ons op via aico.peek@chartindustries.com.

Welder / Fabricator (Windsor, CT, United States, 06095)

Ensuring Chart’s Success…

We are currently seeking a Welder / Fabricator based at our Windsor, CT location.

What Will You Do?

Weld components in flat, vertical, or overhead positions
Perform TIG and MIG welding on a daily basis
Reviews blueprints, work instructions, and job specifications to determine appropriate materials, tools, and procedures needed to complete processes
Layout, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers
Weld separately or in combination, using aluminum and stainless steel
Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations and positions for welding
Perform all work in accordance with quality standards and established safety procedures
Maintain a clean and safe work area
Brakes, rollers, saws, seam welder, plasma cutter and punch press.
Verifies conformance of work pieces to specification, using square, ruler and measuring tape.

Your Physical Work Environment Will Require…

Wear proper PPE for the job
Standing long periods of time
Able to lift 30lbs min
20/20 vision

Your Experience Should Be...

High School Diploma, or GED
5 plus years of welding experience.
Ability to lift up to 25lbs
Must possess mechanical aptitude
Must be able to pass Drug Screening
Current and valid certification a plus
Ability to work overtime if needed.
Use a variety of hand tools
Five years of experience preferable in a manufacturing setting.
Strong mechanical aptitude is a must
Attention to detail

Our Benefits Package...

Chart's benefit package includes: Medical, Vision, 401K, Dental, Life Insurance.

Technical Sales (Work From Home, XX - Home Office, United States, n/a)

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives.

Chart Industries is looking for a Business Development Manager. This role can be based in the Pacific Time Zone. The position's primary responsibility is to secure contracts for manufactured water treatment solutions from in the municipal, private water utility, commercial, and industrial markets within the assigned geographical territory.

What Will You Do?

Generate new sales
Plan, Strategize, and Execute Sales Plan for assigned market(s)
Ownership of meeting annual sales goal for the territory.
Ownership of meeting annual pipeline growth goal for the territory.
Actively and accurately manage the opportunity pipeline using Salesforce, updating opportunities with timely information, and providing bookings forecasts.
Develop territory and identify leads by establishing relationships and rapport with Engineers, End Users, Operators, Trade Organizations, Regulators, and Contractors.
Thorough understanding of AdEdge treatment processes, technologies, products, and differentiators.
Knowledge of bidding laws, practices, and all possible commercialization pathways in the territory.
Effectively guide customers through the discovery process, identifying needs, and position AdEdge as the preferred solution.
Efficiently and clearly communicate with the Applications Engineering team using defined processes and tools for the development of proposals.
Review proposals and support bid preparation, reviewing competitive position and contributing to internal processes for pricing approval.
Pro-active communication with customers on status of deliverables and expected delivery.
Prepare key target / travel plans according to assigned budget and execute.
Prepare and deliver technical presentations for webinars, lunch and learns, and regional trade shows.
Lead the relationship with Manufacturer’s Representatives / Agents in the territory, leveraging mutual strengths and working effectively together for successful outcomes on opportunities. Pro-actively communicate expectations on projects and included commission.
Participate in regional tradeshows, submit abstracts, and present whenever possible.

Your Education and Experience Should Be...

At least 3 years of sales engineering experience.
Bachelor’s Degree in Engineering (Mechanical, Chemical or Environmental) or 5+ years of experience in Water or Wastewater Treatment
Experience in water treatment in municipal or industrial market
Strong understanding of and experience selling adsorption, filtration, ion exchange, and reverse osmosis systems and processes.
Ability to understand and interpret customer water quality data and identify potential solutions to meet treatment goals
Strong presentation skills and written communication skills
Self-motivated, possessing the emotional intelligence and relationship skills required for effective cold calling, qualifying prospects, and identifying key customers in markets.
Organized and analytical, able to eliminate sales obstacles through creative and adaptive approaches.
Ability to effectively build and maintain relationships internally, working with multiple departments in a matrix organization to problem solve and serve customers.
Manage multiple priorities.
“Own the Outcome” mentality and work ethic

Base Salary Range: $93,500-125,000

Maintenance Mechanic (Theodore, AL, United States, 36582)

Ensuring Chart’s Success…

What Will You Do?

Under general direction, repair and maintenance of production related equipment within the manufacturing facility.

· Troubleshoots and repairs equipment including electrical, hydraulic and mechanical, plumbing, engines, motors, cranes and other production related equipment

· Documents and completes records of repair, work orders, etc. in an accurate and timely manner

· Uses hand and power tools and precision measuring and testing instruments to repair and maintain

· Maintains a clean work area and maintains general housekeeping standards, such as proper care for assigned tools

· Understands and practices established safety and quality standard procedures

· Performs all tasks to ISO standards and requirements

· Assists with cross training peers

· Other duties and responsibilities as assigned by management

Your Physical Work Environment Will Require…

PHYSICAL DEMANDS:

WORK ENVIRONMENT:

Moderate noise in the work environment

Your Experience Should Be...

Required

· 3+ years related experience, preferably in a manufacturing or industrial environment

· Proven working knowledge of industrial powered equipment including forklifts, aerial lifts, cranes and hoists

· Intermediate electric, pneumatic, hydraulic and PLC troubleshooting skills

· Advanced troubleshooting and repair skills

· Experience interpreting blueprints, sketches

· Basic math

· Self - starter capable of effectively managing multiple concurrent projects

· Overtime, weekend hours and split shifts, as needed

Preferred

· High school diploma or GED

· Certification from trade school or technical program

· Basic wiring skills a plus

· Electrical motor control experience, desired

· Effective communication skills

· Familiarity with Microsoft Office a plus

Our Benefits Package...

CNC Machinist - 2nd Shift (Tulsa, OK, United States, 74115)

Ensuring Chart’s Success…

Interested in learning more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives

*Please note, this is a 2nd shift position. Sunday - Thursday, 2pm - 10:30pm