Test Engineer

Apply now »

Date: Jul 28, 2026

Location: Canton, GA, United States, 30107

Company: Chart Industries

Ensuring Chart’s Success…

“Cooler By Design” - Chart’s principal focus is the design and fabrication of cryogenic equipment; so you can see where we get our tagline from, right? Well, yes and no – see, we think the stuff we design and build is pretty cool too. What’s more, we’re problem solvers. Customers don’t come to Chart with an equipment specification, they come to Chart with a challenge. That’s where you come in, because someone has to figure it out, all the way from conceptual design to installation and commissioning of equipment at site. The applications we service are pretty diverse (and cool) too – from solutions for launching rockets into space; to providing low carbon energy for vehicles, industries and even entire communities; to the preservation of critical human and animal tissue. Pop into a well-known fast food outlet and it’ll likely be Chart equipment supplying your carbonated beverage. If nitro coffee or nitro ice cream is your thing – well, that’s Chart technology too (and it’s also cool)! Interested to learn more? Take a tour of Chart City to get a feel of how Chart equipment solutions impact our daily lives. 

What Will You Do?

  1. Develop test procedures for testing products or technologies when existing procedures do not exist.
  2. Design prototypes of cryogenic equipment.
  3. Coordinate with Purchasing, Product Management, and Design Engineering as needed to keep development and test plans on schedule and produce prototypes.
  4. Setup testing apparatus and data acquisition system.
  5. Record and analyze data and write test reports.
  6. Observe and practice safety procedures and policies, participate in safety program and department meetings.
  7. Support in the production of prototype tank builds and that they are built within the project timeline.
  8. Ensure all the necessary production documentations are properly released and understood by production personnel by working alongside Manufacturing and Quality Engineers.
  9. Make necessary changes in design and/or drawings utilizing 3D CAD software with support from the Design Engineer.
  10. Customer point of contact and technical expert for HLH2 vehicle fuel systems.   
  11. Provide technical information and specifications for components, assemblies and final products.
  12. Follow the 5-phase release process for new product introduction (ie: APQP).
  13. Support interdepartmental teams within the US and Europe to evaluate the manufacturability of products, improve production efficiency, assess tooling requirements, and estimating labor/material.
  14. Provide direct manufacturing support to resolve production problems.
  15. Provide support and engineering documentation for technical inquiries from customers.
  16. Define and communicate product /component specifications to suppliers.
  17. Work with interdepartmental teams to ensure continuous compliance to ISO 9001, TS 16949 and IATF 16949 standards.
  18. Involvement in relevant standards organizations (ISO, NFPA, SAE etc)
  19. Observe and practice safety procedures and policies.
  20. Other duties and responsibilities as assigned by management.

Your Physical Work Environment Will Require…

PHYSICAL REQUIREMENTS

  • Frequent standing, sitting and walking, computer work and lifting up to 25 lbs.
  • Occasional heavier lifting based on production standards.
  • Hands on to include working on different types of trucks

WORK ENVIRONMENT:

Working Conditions:

  • Production factory support and office environment.
  • Work related travel may be required (2 to 4 times per year).
  • Possible travel within Europe, the US and to the customer sites to gather data or work on various projects

Work Hazards:

  • Production floor environment will involve possible exposure to materials with rough edges, temperature extremes, moving mechanical parts, occasional flying debris, chemical cleaning solvents and their odors.
  • Working with cryogenic products will involve possible exposure to pressurized flammable gas, pressurized oxidizing gas, pressurized inert gas and very low temperatures (-320º F).

Your Experience Should Be...

  • BS degree required, preferably in Mechanical Engineering.
  • 2 or more years of work experience in a related technical field.
  • Experience in the Heavy Truck, Automotive Industry as an OEM supplier or OEM manufacturer, a plus.
  • Heavy truck, automotive or diesel engine experience as related to fuel delivery and electrical systems, a plus.
  • Experience with pressurized gas systems including LIN/LOX/LAR and flammables.
  • Experience with hand tools and metal fabrication equipment.
  • Excellent oral and written communication skills.
  • Highly motivated self-starter and a team player.
  • Customer service orientation.
  • Must be proficient with the Microsoft Office Pak, specifically Word, Excel, and PowerPoint.
  • Proven experience with 3D modeling and design utilizing AutoCAD/Inventor and/or SolidWorks.
  • Familiar with Data Acquisition and rudimentary controls. 
  • Exposure to JD Edwards or similar manufacturing software.
  • Basic Understanding of Cryogenic Liquids and their properties.
  • Understanding of heat transfer and vacuum insulation.
  • Experience with APQP, PPAP, FMEA, Control Plans, a plus.
  • Experience with FEA, a plus
  1.  

Our Benefits Package...